24979-97-3Relevant articles and documents
Liquid phase hydrodeoxygenation of furfural over laponite supported NiPMoS nanocatalyst: Effect of phosphorus addition and laponite support
Krishnan, P. Santhana,Umasankar,Tamizhdurai,Mangesh,Shanthi
, (2021/02/26)
Unsupported and laponite supported NiPMoS catalysts were prepared under the hydrothermal method and investigated for liquid-phase hydrodeoxygenation of furfural in a high-pressure batch reactor at 423 ?K ? 463 ?K under 20 ?bar H2 pressure. The reaction significantly produced 94% of furfural conversion with 75% yield of 2-MF on NiPMoS catalyst whereas, NiPMoS/Lap catalyst exhibited 28% of 2-MF yield with complete conversion at 463 ?K under 20 ?bar H2 pressure in toluene solvent. The influence of process parameters such as reaction temperature, reactant volume, catalyst compositions, and hydrogen pressure on furfural conversion and product yield was investigated in detail. The high reactivity and synergetic effect of the NiPMoS catalyst are due to added phosphorus, which has a profound influence on the structure of the catalyst, thereby increasing surface acidity, basicity, hydrogen consumption, and a number of MoS2 fringes and the dispersion of MoS2 on the surface of the support. The catalysts were characterized based on HRTEM, H2, CO2, and NH3 TPD, FT–IR, FT–Raman, DRS UV–Vis, XRD, N2–physisorption, and TGA. Recyclability, N2–physisorption, and XRD results confirm the stability and practical applicability of the catalyst for industrial applications.
Deoxygenation of primary amides to amines with pinacolborane catalyzed by Ca[N(SiMe3)2]2(THF)2
Gong, Mingliang,Guo, Chenjun,Jiang, Linhong,Luo, Yunjie,Yu, Chong
supporting information, p. 1201 - 1206 (2021/05/29)
Deoxygenative reduction of amides is a challenging but favorable synthetic method of accessing amines. In the presence of a catalytic amount of Ca[N(SiMe3)2]2(THF)2, pinacolborane (HBpin) could efficiently reduce a broad scope of amides, primary amides in particular, into corresponding amines. Functional groups and heteroatoms showed good tolerance in this process of transformation, and a plausible reaction mechanism was proposed.
Interfacial effect of Pd supported on mesoporous oxide for catalytic furfural hydrogenation
Lee, Hojeong,Nguyen-Huy, Chinh,Jeong Jang, Eun,Lee, Jihyeon,Yang, Euiseob,Lee, Man Sig,Kwak, Ja Hun,An, Kwangjin
, p. 291 - 300 (2020/03/05)
Highly dispersed Pd is loaded onto different types of mesoporous oxide supports to investigate the synergetic metal-support effect in catalytic furfural (FAL) hydrogenation. Ordered mesoporous Co3O4, MnO2, NiO, CeO2, and Fe2O3 are prepared by the nanocasting and the supported Pd on mesoporous oxide catalysts are obtained by the chemical reduction method. It is revealed that mesoporous oxides play an important role on Pd dispersion as well as the redox behavior of Pd, which determines the final FAL conversion. Among the catalysts used, Pd/Co3O4 shows the highest conversion in FAL hydrogenation and distinct product selectivity toward 2-methylfuran (MF). While FAL is converted via two distinct pathways to produce either furfuryl alcohol (FA) via aldehyde hydrogenation or MF via hydrogenolysis, MF as a secondary product is derived from FA via the hydrogenolysis of C–O over the Pd/Co3O4 catalyst. It is revealed that FAL is hydrogenated to FA preferentially on the Pd surface; then the secondary hydrogenolysis to MF from FA is further promoted at the interface between Pd and Co3O4. We confirm that the reaction pathway over Pd/Co3O4 is totally different from other catalysts such as Pd/MnO2, which produces FA dominantly. The characteristics of the mesoporous oxides influence the Pd-oxide interfaces, which determine the activity and selectivity in FAL hydrogenation.