50-32-8 Usage
Description
Benzo[a]pyrene, also known as BaP, is a potent mutagen and carcinogen belonging to the class of polycyclic aromatic hydrocarbons (PAHs). It is an odorless, yellow substance that can exist in the form of orthorhombic or monoclinic crystals or as a liquid. Benzo[a]pyrene is produced during the incomplete combustion or pyrolysis of organic material and can be found in nature from volcanic eruptions and forest fires. It is also generated through human activities such as burning plants, wood, coal, and operating vehicles like cars and trucks. Additionally, it is present in some foods, pharmaceutical products, and tobacco smoke.
Uses
1. Used in Toxicological and Cancer Research:
Benzo[a]pyrene is extensively used in cancer research and for gas chromatography (GC) and liquid chromatography (LC) analysis. It serves as a multipurpose intermediate and a positive control in carcinogenicity studies due to its well-known carcinogenic properties.
2. Used in Rubber/Plastic Production:
Benzo[a]pyrene containing extender oil is utilized in the rubber and plastic industry to achieve the desired elasticity at a more affordable price.
3. Used in Paints and Coatings:
Benzo[a]pyrene containing coal tar pitch is employed in various paints or coatings as corrosion protection coats for hydraulic equipment, pipework, steel pilings in ports, vessels, and sealcoat products.
4. Used as Wood-Preservatives:
Benzo[a]pyrene can be used as a wood-preservative to prevent wood parasites and to protect wood from drying out.
References
https://monographs.iarc.fr/ENG/Monographs/vol100F/mono100F-14.pdf
http://www.dhss.delaware.gov/dph/files/benzopyrenefaq.pdf
https://greenliving.epa.gov.tw
https://www.umweltbundesamt.de
Barbara J. Mahler, Peter C. Van Metre, Judy L. Crane, Alison W. Watts, ?Mateo Scoggins, and E. Spencer Williams, Coal-Tar-Based Pavement Sealcoat and PAHs: Implications for the Environment, Human Health, and Stormwater Management, Environ Sci Technol, 2012, vol. 46, 3039-3045
Air & Water Reactions
Insoluble in water.
Reactivity Profile
BENZO[A]PYRENE undergoes photo-oxidation after irradiation in indoor sunlight or by fluorescent light in organic solvents. Incompatible with strong oxidizing agents including various electrophiles, peroxides, nitrogen oxides and sulfur oxides. Oxidized by ozone, chromic acid and chlorinating agents. Readily undergoes nitration and halogenation. Hydrogenation occurs with platinum oxide .
Hazard
Highly toxic, confirmed carcinogen by inhalation.
Health Hazard
The acute oral toxicity of benzo[a]pyrene islow. This may be due to the poor absorption of this compound by the gastrointestinal tract.The lethal dose in mice from intraperitonealadministration is reported as 500 mg/kg(NIOSH 1986).Animal studies show sufficient evidence ofits carcinogenicity by all routes of exposureaffecting a variety of tissues, which includethe lungs, skin, liver, kidney, and blood.Dasenbrock et al. (1996) have investigatedthe carcinogenic potency of carbon particles,diesel soot and benzo[a]pyrene in rats fromrepeated intracheal administration in a 16-week study. A total dose of 15 mg purebenzo[a]pyrene caused lung tumor in theexperimental animals at a rate similar tothat caused by diesel soot and carbon blackparticles.Lodovici et al. (1998) measured the levelsof PAHs and benzo[a]pyrenediol epoxideDNA adduct in autoptic lung samples ofsmokers and non-smokers. Benzo[a]pyrenediol epoxide resulting from metabolic activation of benzo[a]pyrene binds to DNA to forman adduct, the levels of which can be used as abiomarker to evaluate the exposure of humansto benzo(a)pyrene.Benz[a]pyrene exhibited teratogeniceffects in test species. It is a mutagen.It showed positive in a histidine rever-sion–Ames test, cell transform mouse embryotest, and in in vitro sister chromatid exchange(SCE)–human lymphocytes..
Fire Hazard
Literature sources indicate that BENZO[A]PYRENE is nonflammable.
Toxicology
benzo[a]pyrene (BP) is a reasonably potent contact carcinogen, and therefore has been subjected
to extensive carcinogenic testing. A diet containing 25 ppm of benzo[a]pyrene (BP) fed to
mice for 140 days produced leukemia and lung adenomas in addition to
stomach tumors. Skin tumors developed in over 60% of the rats treated topically
with approximately 10 mg of benzo[a]pyrene three times per week.
The incidence of skin tumors dropped to about 20% when treatment was
about 3 mg 3 per week. Above the 10 mg range, however, the incidence
of skin tumors increased dramatically to nearly 100%.
benzo[a]pyrene (BP) is also carcinogenic when administered orally. In one experiment,
weekly doses of greater than 10 mg administered for 10 weeks induced
stomach cancers, although no stomach cancers were produced at the dose
of 10 mg or less. At 100 mg doses, nearly 79% of the animals had developed
stomach tumors by the completion of the experiment.
When 15 ppm of benzo[a]pyrene (BP) in feed was orally administered to mice, production of
leukemia, lung adenomas, and stomach tumors were observed after 140 days.
Safety Profile
Confirmed carcinogen withexperimental carcinogenic, neoplastigenic, andtumorigenic data. A poison via subcutaneous,intraperitoneal, and intrarenal routes. Experimentalteratogenic and reproductive effects. Human mutation data reported. A skin irritant.
Potential Exposure
Benzopyrene (BP) is a PAH that
has no commercial-scale production. B(a)P is produced in
the United States by one chemical company and distributed
by several specialty chemical companies in quantities from
100 mg to 5 g for research purposes. Although not manufactured
in great quantity, B(a)P is a by-product of
combustion. It is estimated that 1.8 million pounds per year
are released from stationary sources, with 96% coming
from: (1) coal refuse piles, outcrops, and abandoned coal
mines; (2) residential external combustion of bituminous
coal; (3) coke manufacture; and (4) residential external
combustion of anthracite coal. Human exposure to B(a)P
can occur from its presence as a by-product of chemical
production. The number of persons exposed is not known.
Persons working at airports in tarring operations; refuse
incinerator operations; power plants, and coke manufacturers,
may be exposed to higher B(a)P levels than the general
population. Scientists involved in cancer research or in
sampling toxic materials may also be occupationally
exposed. The general population may be exposed to B(a)P
from air pollution, cigarette smoke, and food sources. B(a)
P has been detected in cigarette smoke at levels ranging
from 0.2 to 12.2:g per 100 cigarettes. B(a)P has been
detected at low levels in foods ranging from 0.1 to 50 ppb.
Source
MCLG: zero; MCL: 0.2 μg/L (U.S. EPA, 2000).
Identified in Kuwait and South Louisiana crude oils at concentrations of 2.8 and 0.75
ppm, respectively (Pancirov and Brown, 1975). Emitted to the environment from coke production,
coal refuse and forest fires, motor vehicle exhaust, and heat and power (utility) generation (Suess,
1976). Benzo[a]pyrene is produced from combustion of tobacco and fuels. It is also a component
of gasoline (133–143 μg/L), fresh motor oil (20 to 100 g/kg), used motor oil (83.2 to 242.4
mg/kg), asphalt (≤0.0027 wt %), coal tar pitch (≤1.25 wt %), cigarette smoke (25 μg/1,000
cigarettes), and gasoline exhaust (quoted, Verschueren, 1983). Detected in asphalt fumes at an
average concentration of 14.72 ng/m3 (Wang et al., 2001). Benzo[a]pyrene was also detected in
liquid paraffin at an average concentration of 25 μg/kg (Nakagawa et al., 1978).
Benzo[a]pyrene was reported in a variety of foodstuffs including raw and cooked meat (ND to
12 ppb), fish (0.3–6.9 ppb), vegetables oils (ND-4), fruits (ND to 6.2 ppb) (quoted, Verschueren,
1983).
The concentration of benzo[a]pyrene in coal tar and the maximum concentration reported in
groundwater at a mid-Atlantic coal tar site were 3,600 and 0.0058 mg/L, respectively (Mackay and
Gschwend, 2001). Based on laboratory analysis of 7 coal tar samples, benzo[a]pyrene
concentrations ranged from 500 to 6,400 ppm (EPRI, 1990). In three high-temperature coal tars,
benzo[a]pyrene concentrations ranged from 5,300 to 7,600 mg/kg (Lehmann et al., 1984).
Benzo[a]pyrene was identified in a U.S. commercial creosote at an approximate concentration
of 0.3% (Black, 1982). Nine commercially available creosote samples contained benzo[a]pyrene
at concentrations ranging from 2 to 160 mg/kg (Kohler et al., 2000).
Identified in high-temperature coal tar pitches used in roofing operations at concentrations
ranging from 4,290 to 13,200 mg/kg (Arrendale and Rogers, 1981; Malaiyandi et al., 1982). Lee et
al. (1992a) equilibrated 8 coal tars with distilled water at 25 °C. The maximum concentration of
benzo[a]pyrene observed in the aqueous phase was 1 μg/L.
Schauer et al. (2001) measured organic compound emission rates for volatile organic
compounds, gas-phase semi-volatile organic compounds, and particle phase organic compounds
from the residential (fireplace) combustion of pine, oak, and eucalyptus. The particle-phase
emission rates of benzo[a]pyrene were 0.712 mg/kg of pine burned, 0.245 mg/kg of oak burned,
and 0.301 mg/kg of eucalyptus burned.Particle-phase tailpipe emission rates from gasoline-powered automobiles with and without
catalytic converters were 0.021 and 41.0 μg/km, respectively (Schauer et al., 2002).
Under atmospheric conditions, a low rank coal (0.5–1 mm particle size) from Spain was burned
in a fluidized bed reactor at seven different temperatures (50 °C increments) beginning at 650 °C.
The combustion experiment was also conducted at different amounts of excess oxygen (5 to 40%)
and different flow rates (700 to 1,100 L/h). At 20% excess oxygen and a flow rate of 860 L/h, the
amount of benzo[a]pyrene emitted ranged from 39.4 ng/kg at 650 °C to 690.7 ng/kg at 850 °C.
The greatest amount of PAHs emitted were observed at 750 °C (Mastral et al., 1999).
Environmental fate
The main natural sources of Benzo[a]pyrene(BaP) are forest fires and erupting volcanoes. Anthropogenic sources include the combustion of fossil fuels, coke oven emis- sions, and vehicle exhausts. In surface waters, direct deposition from the atmosphere appears to be the major source of BaP. Benzo[a]pyrene is moderately persistent in the environment. It readily binds to soils and does not readily leach to groundwater, though it has been detected in some groundwater. If released to water, it sorbs very strongly to sediments and particulate matter. In most waters and sediments, it resists breakdown by microbes or reactive chemicals, but it may evaporate or be degraded by sunlight. In water supply systems, it tends to sorb to any particulate matter and be removed by filtration before reaching the tap. In tap water, its source is mainly from PAH-containing materials in water storage and distribution systems.
Purification Methods
A solution of 250mg of benzo[a]pyrene in 100mL of *benzene is diluted with an equal volume of hexane, then passed through a column of alumina, Ca(OH)2 and Celite (3:1:1). The adsorbed material is developed with a 2:3 *benzene/hexane mixture. (It showed as an intensely fluorescent zone.) The main zone is eluted with 3:1 acetone/EtOH, and is transferred into 1:1 *benzene-hexane by adding H2O. The solution is washed, dried with Na2SO4, evaporated and crystallised from *benzene by the addition of MeOH [Lijinsky & Zechmeister J Am Chem Soc 75 5495 1953]. Alternatively it can be chromatographed on activated alumina, eluted with a cyclohexane-*benzene mixture containing up to 8% *benzene, and the solvent evaporated under reduced pressure [Cahnmann Anal Chem 27 1235 1955], and crystallised from EtOH [Nithipatikom & McGown Anal Chem 58 3145 1986]. [Beilstein 5 III 2517, 5 IV 2687.] CARCINOGENIC.
Toxicity evaluation
BaP is purposely synthesized solely for laboratory studies.
The primary source of BaP and many PAHs in air is the
incomplete combustion of wood, gasoline, and other fuels;
in industrial settings where coal is burned; and in natural
burns such as forest fires. BaP can bind to particulate matter,
and inhalation is a common route of exposure. BaP is poorly
water soluble, partitioning strongly to the sediment, and
does not readily bioaccumulate. BaP is found in fossil fuels,
crude oils, shale oils, and coal tars, and is emitted with gases
and fly ash from active volcanoes. If released to air, an
extrapolated vapor pressure of 5.49×10-9 mm Hg at 25°C
indicates BaP will exist solely in the particulate phase in the
atmosphere. Particulate-phase BaP is usually removed from
the atmosphere by wet or dry deposition. BaP contains
chromophores that absorb at wavelengths >290 nm and
therefore is expected to be susceptible to direct photolysis by
sunlight; after 17 h irradiation with light >290 nm, 26.5% of
BaP adsorbed onto silica gel was degraded. If released to soil,
BaP is expected to have very low to no mobility based on
measured soil Koc values of 930–6300. Volatilization from
moist soil surfaces is not expected to be an important
fate process based on a Henry’s Law constant of 4.57×10-7 atm m3 mol1. The stability of BaP in soil is
expected to vary depending on the nature of compounds
accompanying it and the nature and previous history of the
soil; biodegradation half-lives of 309 and 229 days were
observed in Kidman and McLaurin sandy loam soils,
respectively. BaP is expected to adsorb to suspended solids
and sediment based on the measured Koc values, when
released into water. Biodegradation of BaP is possible in
aquatic systems. Volatilization from water surfaces is not
expected to be an important fate process based on this
compound’s Henry’s Law constant. Measured bioconcentration
values ranging from 8.7 to 1×10105 suggest
bioconcentration in aquatic organisms can be low to very
high. Hydrolysis is not expected to be an important environmental
fate process since this compound lacks functional
groups that hydrolyze under environmental conditions.
Incompatibilities
Incompatible with oxidizers (chlorates,
nitrates, peroxides, permanganates, perchlorates, chlorine,
bromine, fluorine, etc.); contact may cause fires or explosions.
Keep away from alkaline materials, strong bases,
strong acids, oxoacids, epoxides, nitrogen dioxide and ozone.
Waste Disposal
Incineration in admixture
with a flammable solvent.
Check Digit Verification of cas no
The CAS Registry Mumber 50-32-8 includes 5 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 2 digits, 5 and 0 respectively; the second part has 2 digits, 3 and 2 respectively.
Calculate Digit Verification of CAS Registry Number 50-32:
(4*5)+(3*0)+(2*3)+(1*2)=28
28 % 10 = 8
So 50-32-8 is a valid CAS Registry Number.
InChI:InChI=1/C20H12/c1-2-7-17-15(4-1)12-16-9-8-13-5-3-6-14-10-11-18(17)20(16)19(13)14/h1-12H
50-32-8Relevant articles and documents
Regioselective arene homologation through rhenium-catalyzed deoxygenative aromatization of 7-oxabicyclo[2.2.1]hepta-2,5-dienes
Murai, Masahito,Ogita, Takuya,Takai, Kazuhiko
supporting information, p. 2332 - 2335 (2019/02/27)
Combined use of oxorhenium catalysts with triphenyl phosphite as an oxygen acceptor allowed efficient deoxygenative aromatization of oxabicyclic dienes. The reaction proceeded under neutral conditions and was compatible with various functional groups. Combining this deoxygenation with regioselective bromination and trapping of the generated aryne with furan resulted in benzannulative π-extension at the periphery of the PAHs. This enabled direct use of unfunctionalized PAHs for extension of π-conjugation. Iteration of the transformations increased the number of fused-benzene rings one at a time, which has the potential to alter the properties of PAHs by fine-tuning the degree of π-conjugation, shape, and edge topology.
Synthesis of 13C4-labelled oxidized metabolites of the carcinogenic polycyclic aromatic hydrocarbon benzo[a]pyrene
Wu, Anhui,Xu, Daiwang,Lu, Ding,Penning, Trevor M.,Blair, Ian A.,Harvey, Ronald G.
, p. 7217 - 7233 (2012/09/05)
Polycyclic aromatic hydrocarbons (PAHs), such as benzo[a]pyrene (BaP), are ubiquitous environmental contaminants that are implicated in causing lung cancer. BaP is a component of tobacco smoke that is transformed enzymatically to active forms that interact with DNA. We reported previously development of a sensitive stable isotope dilution LC/MS method for analysis of BaP metabolites. We now report efficient syntheses of 13C4-BaP and the complete set of its 13C4-labelled oxidized metabolites needed as internal standards They include the metabolites not involved in carcinogenesis (Group A) and the metabolites implicated in initiation of cancer (Group B). The synthetic approach is novel, entailing use of Pd-catalyzed Suzuki, Sonogashira, and Hartwig cross-coupling reactions combined with PtCl2-catalyzed cyclization of acetylenic compounds. This synthetic method requires fewer steps, employs milder conditions, and product isolation is simpler than conventional methods of PAH synthesis. The syntheses of 13C4-BaP and 13C4-BaP-8-ol each require only four steps, and the 13C-atoms are all introduced in a single step. 13C4-BaP-8-ol serves as the synthetic precursor of all the oxidized metabolites of 13C-BaP implicated in initiation of cancer. The isotopic purities of the synthetic 13C 4-BaP metabolites were estimated to be ≥99.9%.
Emission factors for carbonaceous particles and polycyclic aromatic hydrocarbons from residential coal combustion in China
Chen, Yingjun,Sheng, Guoying,Bi, Xinhui,Feng, Yanli,Mai, Bixian,Fu, Jiamo
, p. 1861 - 1867 (2008/12/21)
Emission factors of carbonaceous particles, including black carbon (BC) and organic carbon (OC), and polycyclic aromatic hydrocarbons (PAHs) were determined for five coals, which ranged in maturity from sub-bituminous to anthracite. They were burned in the form of honeycomb briquettes in a residential coalstove, one of the most common fuel/stove combinations in China. Smoke samples were taken through dilution sampling equipment, with a high volume sampler that could simultaneously collect emissions in both particulate and gaseous phases, and a cascade impactor that could segregate particles into six fractions. Particulate BC and OC were analyzed by a thermal-optical method, and PAHs in emissions of both phases were analyzed by GC-MS. Burning of bituminous coals produced the highest emission factors of particulate matter (12.91 g/kg), BC (0.28 g/kg), OC (7.82 g/kg), and 20 PAHs (210.6 mg/kg) on the basis of burned dry ash-free (daf) coal, while the anthracite honeycomb-briquette was the cleanest household coal fuel. The size-segregated results show that more than 94% of the particles were submicron, and calculated mass median aerodynamic diameters (MMAD) of all particles were under 0.3 μm. Based on the coal consumption in the residential sector of China, 290.24 Gg (gigagrams) of particulate matter, 5.36 Gg of BC, 170.33 Gg of OC, and 4.72 Gg of 20 PAHs mass were emitted annually from household honeycomb-briquette burning during 2000. Anthracite coal should be selected preferentially and more advanced burning conditions should be applied in domestic combustion, from the viewpoint of both climate change and adverse health effects.