Welcome to LookChem.com Sign In|Join Free

CAS

  • or

55197-79-0

Post Buying Request

55197-79-0 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

55197-79-0 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 55197-79-0 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 5,5,1,9 and 7 respectively; the second part has 2 digits, 7 and 9 respectively.
Calculate Digit Verification of CAS Registry Number 55197-79:
(7*5)+(6*5)+(5*1)+(4*9)+(3*7)+(2*7)+(1*9)=150
150 % 10 = 0
So 55197-79-0 is a valid CAS Registry Number.

55197-79-0SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 14, 2017

Revision Date: Aug 14, 2017

1.Identification

1.1 GHS Product identifier

Product name N,N-dibenzyl-3-methylaniline

1.2 Other means of identification

Product number -
Other names N,N-dibenzyl-3-methylbenzenamine

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:55197-79-0 SDS

55197-79-0Relevant articles and documents

Reductive Alkylation of Azides and Nitroarenes with Alcohols: A Selective Route to Mono- And Dialkylated Amines

Borthakur, Ishani,Maji, Milan,Joshi, Abhisek,Kundu, Sabuj

, p. 628 - 643 (2021/12/27)

Herein, we demonstrated an efficient protocol for reductive alkylation of azides/nitro compounds via a borrowing hydrogen (BH) method. By following this protocol, selective mono- and dialkylated amines were obtained under mild and solvent-free conditions. A series of control experiments and deuterium-labeling experiments were performed to understand this catalytic process. Mechanistic studies suggested that the Ir(III)-H was the active intermediate in this reaction. KIE study revealed that the breaking of the C-H bond of alcohol might be the rate-limiting step. Notably, this solvent-free strategy disclosed a high TON of around 5600. Based on kinetic studies and control experiments, a metal-ligand cooperative mechanism was proposed.

Method of producing higher amine (by machine translation)

-

Paragraph 0048; 0091; 0103, (2016/10/08)

PROBLEM TO BE SOLVED: To provide a method of producing a secondary or tertiary higher amine. SOLUTION: The method of producing a higher amine comprises allowing a primary or secondary amine to react with an alcohol in the presence of at least one species of hydrogen halide selected from hydrogen chloride, hydrogen bromide and hydrogen iodide, or in the presence of a compound capable of producing a hydrogen halide (such as 1,3,5-triazo-2,4,6-triphosphorine-2,2,4,4,6,6-chloride). If the raw material amine is a primary amine, a secondary higher amine and a tertiary higher amine can be produced. If the raw material amine is a secondary amine, a tertiary higher amine can be produced. COPYRIGHT: (C)2012,JPO&INPIT

SiO2-Cu2O: An efficient and recyclable heterogeneous catalyst for N-benzylation of primary and secondary amines

Gupta, Manjulla,Paul, Satya,Gupta, Rajive

, p. 444 - 450 (2014/04/03)

A mild, effective, and selective procedure is reported for the mono N-benzylation and N,N-dibenzylation of primary amines as well as mono N-benzylation of secondary amines using silica-supported copper(I) oxide in water. The silica-supported Cu2O was generated in situ by the reaction of Fehling solution and glucose at 100 C onto activated silica. The catalyst was filtered, washed with water, and oven-dried, and was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, and atomic absorption spectroscopy. The prepared Cu2O-SiO2 was found to be thermally stable up to 325 C. The copper was uniformly distributed onto the surface of the silica, and the mean particle diameter was 7 nm. The catalyst served as a selective heterogenous catalyst for the N-benzylation of primary and secondary amines. The catalyst is recyclable and was used effectively upto fifth run without a significant loss of catalytic activity. Various reaction solvents including water, acetonitrile, and toluene were screened for N-benzylation of amines, and the success of the aqueous system highlights the low environmental impact of the procedure.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 55197-79-0