638-49-3 Usage
Description
Amyl formate is an organic compound with the chemical formula C5H10O2. It is a colorless liquid with a fruity, pear-like odor and is soluble in water and most organic solvents. Amyl formate is commonly used as a solvent, flavoring agent, and perfume ingredient.
Uses
Used in the Chemical Industry:
Amyl formate is used as a solvent for cellulose esters and resins due to its ability to dissolve a wide range of substances and its low toxicity.
Used in the Manufacturing Industry:
Amyl formate is used in solvent mixtures and as a component in the production of films and coatings, providing a versatile and effective solution for various applications.
Used in the Perfume Industry:
Amyl formate is used as a perfume ingredient for leather products, imparting a pleasant and distinctive scent to the material.
Used in the Flavor Industry:
Amyl formate is used as a flavoring agent, adding a fruity and pear-like taste to various food and beverage products.
Preparation
From n-amyl alcohol and formic acid in the presence of H2SO4
Air & Water Reactions
Highly flammable. Insoluble in water.
Reactivity Profile
AMYL FORMATE is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides.
Hazard
Flammable, dangerous fire risk. Toxic by ingestion and inhalation.
Health Hazard
May cause toxic effects if inhaled or absorbed through skin. Inhalation or contact with material may irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution.
Fire Hazard
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
Flammability and Explosibility
Flammable
Safety Profile
Very low toxicity by
several routes. A skin irritant. See also
ESTERS. Dangerously flammable; reacts
vigorously with heat, flame, oxidizing
materials. To fight fire, use foam, Co2, dry
chemical.
Check Digit Verification of cas no
The CAS Registry Mumber 638-49-3 includes 6 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 3 digits, 6,3 and 8 respectively; the second part has 2 digits, 4 and 9 respectively.
Calculate Digit Verification of CAS Registry Number 638-49:
(5*6)+(4*3)+(3*8)+(2*4)+(1*9)=83
83 % 10 = 3
So 638-49-3 is a valid CAS Registry Number.
InChI:InChI=1S/C6H12O2/c1-2-3-4-5-8-6-7/h6H,2-5H2,1H3
638-49-3Relevant articles and documents
Acidic ionic liquid based UiO-67 type MOFs: A stable and efficient heterogeneous catalyst for esterification
Xu, Zichen,Zhao, Guoying,Ullah, Latif,Wang, Meng,Wang, Aoyun,Zhang, Yanqiang,Zhang, Suojiang
, p. 10009 - 10016 (2018/03/23)
A facile strategy for the synthesis of acidic ionic liquid based UiO-67 type MOFs was developed in this study. Br?nsted acids (H2SO4, CF3SO3H and hifpOSO3H (hexafluoroisopropyl sulfuric acid)) were introduced into UiO-67-bpy (bpy = 2,2′-bipyridine-5,5′-dicarboxylic acid) frameworks by reacting with bipyridyl nitrogen to introduce the properties of an acidic ionic liquid into the frameworks. The prepared catalysts, denoted as UiO-67-HSO4, UiO-67-CF3SO3 and UiO-67-hifpOSO3, were characterized by XRD, SEM, FT-IR, EA, TGA and N2 adsorption-desorption studies. The relatively high surface area was still maintained and acidic active groups were uniformly dispersed in the frameworks. The catalytic performance of UiO-67-HSO4, UiO-67-CF3SO3 and UiO-67-hifpOSO3 was evaluated by the esterification of acetic acid with isooctyl alcohol. The prepared catalysts showed good catalytic activities in the esterification, of which UiO-67-CF3SO3 gave the maximum isooctyl alcohol conversion of 98.6% under optimized conditions. The catalyst could be reused five times without a significant decrease in the conversion of isooctyl alcohol, and almost no active species were leached, indicating the excellent stability and reusability of the catalyst. Our study provides one effective way to synthesize heterogeneous acidic ionic liquid catalysts consisting of isolated, well defined acidic groups that will probably attract interest in acid catalyst chemistry.
MONOMER, POLYMER, RESIST COMPOSITION, AND PATTERNING PROCESS
-
, (2014/03/21)
A polymer comprising recurring units derived from a (meth)acrylate monomer of tertiary ester type having branched alkyl on alicycle is used to form a resist composition. When subjected to exposure, PEB and organic solvent development, the resist composition is improved in dissolution contrast.
Nickel-catalyzed hydrosilylation of CO2 in the Presence of Et3B for the synthesis of formic acid and related formates
Gonzalez-Sebastian, Lucero,Flores-Alamo, Marcos,Garcia, Juventino J.
, p. 7186 - 7194 (2014/01/06)
The reaction of CO2 with Et3SiH catalyzed by the nickel complex [(dippe)Ni(μ-H)]2 (1) afforded the reduction products Et3SiOCH2OSiEt3 (12%), Et 3SiOCH3 (3%), and CO, which were characterized by standard spectroscopic methods. Part of the generated CO was found as the complex [(dippe)Ni(CO)]2 (2), which was characterized by single-crystal X-ray diffraction. When the same reaction was carried out in the presence of a Lewis acid, such as Et3B, the hydrosilylation of CO2 efficiently proceeded to give the silyl formate (Et3SiOC(O)H) in high yields (85-89%), at 80 C for 1 h. Further reactivity of the silyl formate to yield formic acid, formamides, and alkyl formates was also investigated.