Pyridine,2-(methylthio)-

1.
1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product identifiers
Product name
Product Number
Brand
CAS-No.
:
:
:
:
2-(Methylthio)pyridine
07655
Fluka
18438-38-5
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin irritation (Category 2)
Eye irritation (Category 2)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes, respiratory system and skin.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H315
H319
H335
Precautionary statement(s)
P261
P305 + P351 + P338
Supplemental Hazard
Statements
Warning
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
none
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R36/37/38
S-phrase(s)
S26
Irritating to eyes, respiratory system and skin.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Caution - substance not yet tested completely.
2.3
3.
3.1
Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms
Formula
Molecular Weight
Component
2-Methylsulfanylpyridine
:
:
:
Methyl 2-pyridyl sulfide
C6H7NS
125,19 g/mol
Concentration
CAS-No.
18438-38-5
-
4.
4.1
4.2
4.3
5.
5.1
5.2
5.3
5.4
FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
Indication of any immediate medical attention and special treatment needed
no data available
FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Sulphur oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8.
8.1
8.2
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Normal measures for preventive fire protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Store under inert gas. Air sensitive.
Specific end uses
no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
9.
9.1
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
e)
f)
g)
h)
Appearance
Odour
Odour Threshold
pH
Melting point/freezing
point
Initial boiling point and
boiling range
Flash point
Evaporation rate
Form: liquid
Colour: light yellow
Stench.
no data available
no data available
no data available
105 °C at 1.013 hPa
no data available
no data available
i)
Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
no data available
no data available
m) Relative density
1,12 g/cm3 at 20 °C
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
no data available
no data available
no data available
no data available
no data available
no data available
no data available
9.2
10.
10.1
10.2
10.3
10.4
10.5
10.6
Other safety information
no data available
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
11.
11.1
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
Additional Information
RTECS: UT6207000
May be harmful if inhaled. Causes respiratory tract irritation.
May be harmful if swallowed.
May be harmful if absorbed through skin. Causes skin irritation.
Causes serious eye irritation.
12.
12.1
12.2
12.3
12.4
12.5
12.6
ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available
13.
13.1
14.
14.1
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN number
14.2
14.3
14.4
14.5
14.6
15.
ADR/RID: -
UN proper shipping name
ADR/RID:
Not dangerous goods
IMDG:
Not dangerous goods
IATA:
Not dangerous goods
Transport hazard class(es)
ADR/RID: -
Packaging group
ADR/RID: -
Environmental hazards
ADR/RID: no
Special precautions for user
no data available
REGULATORY INFORMATION
IMDG: -
IMDG: -
IMDG: -
IMDG Marine pollutant: no
IATA: -
IATA: -
IATA: -
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
16.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
OTHER INFORMATION
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.

;

Recommended suppliers

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

2-Methylthiopyridine Manufacturer/High quality/Best price/In stock

  • Assay:Industrial Grade,
  • Appearance:detailed see specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by sea or by air
  • Application:It is an important raw material and intermediate used in Organic Synthesis, Pharmaceuticals, Agrochemicals and Dyestuff.
Contact Supplier

Simagchem Corporation

China (Mainland) Assessed Supplier

High quality 2-Methylthio Pyridine ? supplier in China

  • Assay:99%
  • Appearance:white-off solid or colorless liquid ( referto COA)
  • Package:25kgs/fiber drum or 200kgs/UN drum
  • Storage:in a cool and dry place
  • Transportation:by sea or by air
  • Application:Flavorss
Contact Supplier

Chemwill Asia Co., Ltd.

China (Mainland) Assessed Supplier

2-(Methylthio)-pyridine

  • Assay:1,d,
  • Appearance:As per Certificate of analysis and our TDS, MSDS
  • Package:Export standard and according to the clients requirement
  • Storage:Store in dry, dark and ventilated place;ISO / Kosher /GMP licence commercial bulk capacity factory in China
  • Transportation:By AIR or by SEA GMP licence / US-FDA,South Korea-KFDA
  • Application:It is an important raw material and intermediate for chemical industry.
Contact Supplier

Henan Tianfu Chemical Co., Ltd.

China (Mainland) Assessed Supplier

18438-38-5

  • Assay:1,
  • Appearance:see COA
  • Package:bag
  • Storage:dry and cool place
  • Transportation:by sea, air, courier
  • Application:Organic Chemicals
Contact Supplier

Hebei Nengqian Chemical Import and Export Co., LTD

China (Mainland) Assessed Supplier

2-Methylthiopyridine

  • Assay: technical grade,
  • Appearance:Colorless to Light yellow to Light orange
  • Package:Inside plastic outside
  • Storage:2-8°C
  • Transportation:We ship goods via DHL, Fedex, UPS, TNT, China post, NL Post and other couriers, weight from 10g to 1000kg or even bulker
  • Application:For chemical research
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View