Product Name

  • Name

    Yttrium

  • EINECS 231-174-8
  • CAS No. 7440-65-5
  • Density 4.469 g/mL at 25 ºC (lit.)
  • Solubility
  • Melting Point 1522 ºC (lit.)
  • Formula Y
  • Boiling Point 3338°C(lit.)
  • Molecular Weight 88.91
  • Flash Point
  • Transport Information UN 3264 8/PG 3
  • Appearance soft silvery-white metal in bulk
  • Safety 26-36/37/39-45-33-27-16
  • Risk Codes 34-36/38-20/21/22
  • Molecular Structure Molecular Structure of 7440-65-5 (Yttrium)
  • Hazard Symbols CorrosiveCIrritantXiHarmfulXnFlammableF
  • Synonyms Yttriumelement;Yttrium-89;
  • PSA 0.00000
  • LogP 0.00000

Yttrium Consensus Reports

Reported in EPA TSCA Inventory.

Yttrium Standards and Recommendations

OSHA PEL: TWA 1 mg(Y)/m3
ACGIH TLV: TWA 1 mg(Y)/m3
DFG MAK: 5 mg(Y)/m3

Yttrium Analytical Methods

For occupational chemical analysis use NIOSH: Elements (ICP) 7300.

Yttrium Specification

The Yttrium, with the cas registry number 7440-65-5, is a kind of soft silvery-white metal in bulk. This chemical is stable chemically and could react with strong oxidizing agents, strong acids, strong bases, and halogens. As to its usage, it can be used in particular as a solid electrolyte and as an oxygen sensor in automobile exhaust systems.

Its product categories are including Inorganics; Metal and Ceramic Science; Metals; Yttrium; Catalysis and Inorganic Chemistry; Chemical Synthesis; YttriumMetal and Ceramic Science; Single SolutionAnalytical Standards; AA Standard SolutionsSpectroscopy; AAS; Alphabetic; Matrix Selection; NitrateSpectroscopy; Reference/Calibration Standards; Standard Solutions; Y.

The characteristics of this chemical are as below: (1)#H bond acceptors: 0; (2)#H bond donors: 0; (3)#Freely Rotating Bonds: 0; (4)Polar Surface Area: 0; (5)Exact Mass: 88.905848; (6)MonoIsotopic Mass: 88.905848; (7)Heavy Atom Count: 1; (8)Covalently-Bonded Unit Count: 1.

When you are dealing with this chemical, you should be very cautious. For one thing, it is irritant to eyes and skin and may cause inflammation to the skin or other mucous membranes. For another thing, it is harmful which may cause damage to health. If by inhalation, in contact with skin and if swallowed, it will be very harmful. In addition, it is corrosive which may destroy living tissue on contact. Beside all these, it is highly flammable which may catch fire in contact with air, only needing brief contact with an ignition source, and it has a very low flash point or evolve highly flammable gases in contact with water.

Therefore, you should take the following instructions to protect yourself. Wear suitable protective clothing, gloves and eye/face protection. If in case of contact with eyes, rinse immediately with plenty of water and seek medical advice and if in case of accident or if you feel unwell seek medical advice immediately (show the label where possible). Then take off immediately all contaminated clothing. When storing it, take precautionary measures against static discharges and keep away from sources of ignition - No smoking. 

In addition, you could convert the following datas into the molecular structure:
(1)Canonical SMILES: [Y]
(2)InChI: InChI=1S/Y
(3)InChIKey: VWQVUPCCIRVNHF-UHFFFAOYSA-N 

Post buying leads

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View