Acetic acid, zirconiumsalt (1:?)

1.
1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product identifiers
Product name
Product Number
Brand
:
:
:
Zirconium acetate solution
413801
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin irritation (Category 2)
Eye irritation (Category 2)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes and skin.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H315
H319
Precautionary statement(s)
P305 + P351 + P338
Supplemental Hazard
Warning
Causes skin irritation.
Causes serious eye irritation.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R36/38
S-phrase(s)
S26
Irritating to eyes and skin.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
2.3
3.
3.2
Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures
Component
Acetic acid
Classification
Concentration
CAS-No.
EC-No.
Index-No.
64-19-7
200-580-7
607-002-00-6
Flam. Liq. 3; Skin Corr. 1A;
H226, H314
C, R10 - R35
10 - 20 %
Zirconium dioxide
CAS-No.
EC-No.
1314-23-4
215-227-2
Skin Irrit. 2; Eye Irrit. 2; STOT
SE 3; H315, H319, H335
10 - 20 %
Xi, R36/37/38
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16
4.
4.1
4.2
4.3
5.
5.1
5.2
5.3
FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
Cough, Shortness of breath, sensation of heat, Nausea, Vomiting, Material is extremely destructive to
tissue of the mucous membranes and upper respiratory tract, eyes, and skin., Inhalation may provoke the
following symptoms:, spasm, inflammation and edema of the larynx, Lung oedema, Pneumonia
Indication of any immediate medical attention and special treatment needed
no data available
FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
no data available
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8.
8.1
8.2
Further information
no data available
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Specific end uses
no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection
tested and approved under appropriate government standards such as NIOSH (US) or EN
166(EU).
Skin protection
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
9.
9.1
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
e)
f)
g)
h)
Appearance
Odour
Odour Threshold
pH
Melting point/freezing
point
Initial boiling point and
boiling range
Flash point
Evaporation rate
Form: liquid
Colour: colourless
no data available
no data available
no data available
no data available
no data available
no data available
no data available
i)
Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
no data available
no data available
m) Relative density
1,279 g/mL at 25 °C
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
no data available
no data available
no data available
no data available
no data available
no data available
no data available
9.2
10.
10.1
10.2
10.3
10.4
10.5
10.6
Other safety information
no data available
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
11.
11.1
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. Material is extremely destructive to the tissue of
the mucous membranes and upper respiratory tract.
May be harmful if swallowed. Causes burns.
May be harmful if absorbed through skin. Causes skin burns.
Causes eye burns.
Signs and Symptoms of Exposure
Cough, Shortness of breath, sensation of heat, Nausea, Vomiting, Material is extremely destructive to
tissue of the mucous membranes and upper respiratory tract, eyes, and skin., Inhalation may provoke the
following symptoms:, spasm, inflammation and edema of the larynx, Lung oedema, Pneumonia
Additional Information
RTECS: Not available
12.
12.1
12.2
12.3
12.4
12.5
ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
12.6
13.
13.1
14.
14.1
Other adverse effects
no data available
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN number
14.2
ADR/RID: 2790
UN proper shipping name
IMDG: 2790
IATA: 2790
ADR/RID:
IMDG:
IATA:
ACETIC ACID SOLUTION
ACETIC ACID, SOLUTION
Acetic acid solution
14.3
Transport hazard class(es)
14.4
14.5
14.6
15.
ADR/RID: 8
Packaging group
ADR/RID: III
Environmental hazards
ADR/RID: no
Special precautions for user
no data available
REGULATORY INFORMATION
IMDG: 8
IMDG: III
IMDG Marine pollutant: no
IATA: 8
IATA: III
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
16.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
OTHER INFORMATION
Text of H-code(s) and R-phrase(s) mentioned in Section 3
Eye Irrit.
Flam. Liq.
H226
H314
H315
H319
H335
Skin Corr.
Skin Irrit.
STOT SE
C
R10
R35
R36/37/38
Xi
Eye irritation
Flammable liquids
Flammable liquid and vapour.
Causes severe skin burns and eye damage.
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
Skin corrosion
Skin irritation
Specific target organ toxicity - single exposure
Corrosive
Flammable.
Causes severe burns.
Irritating to eyes, respiratory system and skin.
Irritant
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.

The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
;

Recommended suppliers

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

High purity Zirconium acetate 98% TOP1 supplier in China

  • Assay:Industrial Grade,
  • Appearance:Brown or colorless transparent liquid
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by sea or by air
  • Application:Widely used in the paint dryer, fiber paper surface treatment, building materials such as waterproofing agent.
Contact Supplier

Hangzhou Dingyan Chem Co., Ltd

China (Mainland) Assessed Supplier

High purity Various Specifications zirconium acetate CAS:7585-20-8

  • Assay:1,
  • Appearance:white powder
  • Package:By foil-alum bag or pap
  • Storage:Place in a dry, ventilated place.
  • Transportation:By courier, air or sea.
  • Application:intermediate
Contact Supplier

Simagchem Corporation

China (Mainland) Assessed Supplier

High quality Zirconium Acetate supplier in China

  • Assay:99%
  • Appearance:white-off solid or colorless liquid ( referto COA)
  • Package:25kgs/fiber drum or 200kgs/UN drum
  • Storage:in a cool and dry place
  • Transportation:by sea or by air
  • Application:Organic intermediates
Contact Supplier

Hebei yanxi chemical co.,LTD.

China (Mainland) Assessed Supplier

Zirconium acetate

  • Assay:Industrial Grade,
  • Appearance:Colorless liquid
  • Package:according to customer's request
  • Storage:This product must be in sealed, avoid light, shade, do not put with food
  • Transportation:by sea or by air
  • Application:Widely used as paint drier
Contact Supplier

HANGZHOU TIANYE CHEMICALS CO., LTD.

China (Mainland) Assessed Supplier

Zirconium acetate

  • Assay:≥97%
  • Appearance:liquid
  • Package:drum
  • Storage:Room temp
  • Transportation:according to your demand
  • Application:Pharm intermediate
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View