Terephthaloyl chloride

1.
1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product identifiers
Product name
Product Number
Brand
REACH No.
CAS-No.
:
:
:
:
:
Terephthaloyl chloride
120871
Anonymous
01-2119488670-30-XXXX
100-20-9
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Inhalation (Category 3)
Skin corrosion (Category 1A)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Toxic by inhalation. Causes severe burns.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H314
H331
Precautionary statement(s)
P261
P280
P305 + P351 + P338
P310
Danger
Causes severe skin burns and eye damage.
Toxic if inhaled.
Avoid breathing dust.
Wear protective gloves/ protective clothing/ eye protection/ face
protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/ physician.
Supplemental Hazard
none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R23
R35
S-phrase(s)
S26
S36/37/39
S45
Toxic by inhalation.
Causes severe burns.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
2.3
3.
3.1
Other hazards
Lachrymator.
COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula
Molecular Weight
Component
Terephthaloyl dichloride
:
:
C8H4Cl2O2
203,02 g/mol
Concentration
CAS-No.
EC-No.
Registration number
100-20-9
202-829-5
01-2119488670-30-XXXX
-
4.
4.1
4.2
4.3
FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take
victim immediately to hospital. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
burning sensation, Cough, wheezing, laryngitis, Shortness of breath, spasm, inflammation and edema of
the larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, Material is
extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin.
Indication of any immediate medical attention and special treatment needed
no data available
5.
5.1
5.2
5.3
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8.
8.1
FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Hydrogen chloride gas
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate
ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Components with DNEL
Component
CAS-No.
Applicatio
Exposure
Exposure
Value
Health effect
n Area
routes
time
Terephthaloyl
100-20-9
Workers
Skin contact 1 d
12mg/kg
Long-term
dichloride
systemic
effects
Workers
Inhalation
10,75
mg/m3
Long-term
systemic
effects
Components with PNEC
Component
CAS-No.
Compartment
Exposure
Value
time
Terephthaloyl
100-20-9
Fresh water
0,668 mg/l
dichloride
Marine water
0,067 mg/l
8.2
Exposure controls
Fresh water sediment
Marine sediment
Soil
1d
1d
1d
3,626 mg/kg
0,363 mg/kg
0,332 mg/kg
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
the product.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Immersion protection
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: > 480 min
Material tested:Dermatril? (Anonymous Z677272, Size M)
Splash protection
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: > 30 min
Material tested:Dermatril? (Anonymous Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 873000, e-mail sales@kcl.de,
test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an Industrial Hygienist familiar with the specific situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
9.
9.1
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
Appearance
Odour
Odour Threshold
pH
Form: flakes
Colour: white
pungent
no data available
4
e)
f)
g)
h)
Melting point/freezing
point
Initial boiling point and
boiling range
Flash point
Evaporation rate
Melting point/range: 79 - 81 °C - lit.
266 °C - lit.
no data available
no data available
i)
Flammability (solid, gas) The product is not flammable.
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
0,01 hPa at 20 °C
no data available
m) Relative density
no data available
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
no data available
no data available
no data available
no data available
no data available
Not explosive
The substance or mixture is not classified as oxidizing.
9.2
Other safety information
Bulk density
872 kg/m3
10.
10.1
10.2
10.3
10.4
10.5
10.6
11.
11.1
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
Avoid moisture.
Incompatible materials
Alcohols, Oxidizing agents, Strong bases
Hazardous decomposition products
Other decomposition products - no data available
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
LD50 Oral - rat - > 5.000 mg/kg
LC50 Inhalation - rat - 4 h - 0,7 mg/l
Remarks: Sense Organs and Special Senses (Nose, Eye, Ear, and Taste):Eye:Lacrimation. Lungs,
Thorax, or Respiration:Dyspnea. Lungs, Thorax, or Respiration:Respiratory stimulation.
LD50 Dermal - rat - > 2.000 mg/kg
Skin corrosion/irritation
Skin - rabbit - Causes severe burns.
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
Maximisation Test - guinea pig - Did not cause sensitization on laboratory animals.
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
Reproductive toxicity - rat - Oral
Maternal Effects: Menstrual cycle changes or disorders.
Reproductive toxicity - rat - Oral
Paternal Effects: Spermatogenesis (including genetic material, sperm morphology,motility, and count).
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
Toxic if inhaled. Material is extremely destructive to the tissue of the
mucous membranes and upper respiratory tract.
May be harmful if swallowed. Causes burns.
May be harmful if absorbed through skin. Causes skin burns.
Causes eye burns.
Signs and Symptoms of Exposure
burning sensation, Cough, wheezing, laryngitis, Shortness of breath, spasm, inflammation and edema of
the larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, Material is
extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin.
Additional Information
RTECS: Not available
12.
12.1
ECOLOGICAL INFORMATION
Toxicity
Toxicity to fish
Toxicity to daphnia and
other aquatic
invertebrates
LC50 - Leuciscus idus (Golden orfe) - 961 mg/l - 96 h
EC50 - Daphnia magna (Water flea) - > 967 mg/l - 48 h
12.2
12.3
12.4
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
12.5
12.6
13.
13.1
14.
14.1
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN number
14.2
ADR/RID: 2923
UN proper shipping name
IMDG: 2923
IATA: 2923
ADR/RID:
IMDG:
IATA:
CORROSIVE SOLID, TOXIC, N.O.S. (Terephthaloyl dichloride)
CORROSIVE SOLID, TOXIC, N.O.S. (Terephthaloyl dichloride)
Corrosive solid, toxic, n.o.s. (Terephthaloyl dichloride)
14.3
Transport hazard class(es)
14.4
14.5
14.6
15.
ADR/RID: 8 (6.1)
Packaging group
ADR/RID: I
Environmental hazards
ADR/RID: no
Special precautions for user
no data available
REGULATORY INFORMATION
IMDG: 8 (6.1)
IMDG: I
IMDG Marine pollutant: no
IATA: 8 (6.1)
IATA: I
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
16.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
OTHER INFORMATION
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.

;

Recommended suppliers

Aecochem Corp.

China (Mainland) Assessed Supplier

Supply high quality Terephthaloyl chloride

  • Assay:99%min
  • Appearance:COA
  • Package:50kg/plastic drum
  • Storage:COA
  • Transportation:
  • Application:MSDS/TDS
Contact Supplier

Simagchem Corporation

China (Mainland) Assessed Supplier

High quality Terephthaloyl Chloride supplier in China

  • Assay:99%
  • Appearance:white-off solid or colorless liquid ( referto COA)
  • Package:25kgs/fiber drum or 200kgs/UN drum
  • Storage:in a cool and dry place
  • Transportation:by sea or by air
  • Application:Intermediate
Contact Supplier

Jinan Finer Chemical Co., Ltd

China (Mainland) Assessed Supplier

Terephthaloyl chloride

  • Assay:1,
  • Appearance:White flake crystal
  • Package:25kg/drum
  • Storage:cool and seal
  • Transportation:by sea, by air, by courier
  • Application:Monomer of synthetic special fiber for Aramid, Nylon reinforcing agent
Contact Supplier

Hefei TNJ chemical industry co.,ltd

China (Mainland) Assessed Supplier

Good quality Terephthaloyl chloride//100-20-9

  • Assay:99%
  • Appearance:white flaky crystals
  • Package:25kg/drum
  • Storage:Keep in cool and dry warehouse
  • Transportation:CIF or FOB by air or by sea
  • Application:As the synthesis of special fiber, can make aramid fiber, polyamide fiber strengthening agent, and as a raw material in organic synthesis
Contact Supplier

Ality Chemical Corporation

China (Mainland) Assessed Supplier

Factory Supply Terephthaloyl dichloride

  • Assay:99.9%
  • Appearance:Refer to COA
  • Package:drum
  • Storage:keep in cool and dry place
  • Transportation:by sea or by air
  • Application:Intermediates and materials
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View