Thiophene,2-bromo-3-methyl-

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name
:
2-Bromo-3-methylthiophene
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
According to Regulation (EC) No1272/2008
Acute toxicity, Oral (Category 4)
Serious eye damage (Category 1)
According to European Directive 67/548/EEC as amended.
Toxic if swallowed. Risk of serious damage to eyes.
Label elements
Pictogram
Signal word
Hazard statement(s)
H302
H318
Precautionary statement(s)
P280
P305 + P351 + P338
Danger
Harmful if swallowed.
Causes serious eye damage.
Wear protective gloves/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Hazard symbol(s)
T
Xn
R-phrase(s)
R25
R41
S-phrase(s)
S26
S36/37/39
S45
Toxic
Harmful
Toxic if swallowed.
Risk of serious damage to eyes.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
Other hazards - none
3. COMPOSITION/INFORMATION ON INGREDIENTS
Formula
Molecular Weight
:
:
C5H5BrS
177,06 g/mol
CAS-No.
EC-No.
Classification
Concentration
2-Bromo-3-methylthiophene
14282-76-9
238-175-2
-
Acute Tox. 4; Eye Dam. 1;
-
H302, H318
Xn, R22 - R41
For the full text of the H-Statements mentioned in this Section, see Section 16.
4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing give artificial respiration Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic
charge.
Conditions for safe storage
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Recommended storage temperature: 2 - 8 °C
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with
multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Hand protection
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Handle with gloves.
Eye protection
Face shield and safety glasses
Skin and body protection
Choose body protection according to the amount and concentration of the dangerous substance at the
work place.
Hygiene measures
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the
product.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Form
Colour
Safety data
pH
Melting point
Boiling point
Flash point
Ignition temperature
Lower explosion limit
Upper explosion limit
Density
Water solubility
Partition coefficient:
liquid
light yellow
no data available
no data available
173 - 176 °C - lit.
68 °C - closed cup
no data available
no data available
no data available
1,572 g/cm3 at 25 °C
no data available
log Pow: 3,138
n-octanol/water
10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Conditions to avoid
no data available
Materials to avoid
Strong oxidizing agents
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Sulphur oxides, Hydrogen
bromide gas
11. TOXICOLOGICAL INFORMATION
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
Prolonged or repeated exposure may cause allergic reactions in certain sensitive individuals.
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. May cause respiratory tract irritation.
Toxic if swallowed.
May be harmful if absorbed through skin. May cause skin irritation.
Causes serious eye irritation.
Additional Information
RTECS: no data available
12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
PBT and vPvB assessment
no data available
Other adverse effects
no data available
13. DISPOSAL CONSIDERATIONS
Product
This combustible material may be burned in a chemical incinerator equipped with an afterburner and
scrubber. Observe all federal, state, and local environmental regulations. Contact a licensed professional
waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.
14. TRANSPORT INFORMATION
ADR/RID
Not dangerous goods
IMDG
Not dangerous goods
IATA
UN-Number: 3334 Class: 9
Proper shipping name: Aviation regulated liquid, n.o.s. (2-Bromo-3-methylthiophene)
15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
16. OTHER INFORMATION
Text of H-code(s) and R-phrase(s) mentioned in Section 3
Acute Tox.
Eye Dam.
H302
H318
Xn
R22
R41
Further information
Acute toxicity
Serious eye damage
Harmful if swallowed.
Causes serious eye damage.
Harmful
Harmful if swallowed.
Risk of serious damage to eyes.
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.
;

Recommended suppliers

Simagchem Corporation

China (Mainland) Assessed Supplier

High quality 2-Bromo-3-Methylthiophene supplier in China

  • Assay:99%
  • Appearance:white-off solid or colorless liquid ( referto COA)
  • Package:25kgs/fiber drum or 200kgs/UN drum
  • Storage:in a cool and dry place
  • Transportation:by sea or by air
  • Application:Specialty chemical
Contact Supplier

Henan Allgreen Chemical Co.,Ltd

China (Mainland) Assessed Supplier

2-Bromo-3-methylthiophene

  • Assay:98%
  • Appearance:yellow liquid
  • Package:According to the demand of customer
  • Storage:Sealed, dry, microtherm , avoid light and smell.
  • Transportation:by air or by sea
  • Application:OLED Intermediate
Contact Supplier

Ality Chemical Corporation

China (Mainland) Assessed Supplier

Factory Supply 2-Bromo-3-Methylthiophene

  • Assay:99.9%
  • Appearance:Refer to COA
  • Package:drum
  • Storage:keep in cool and dry place
  • Transportation:by sea or by air
  • Application:Intermediates and materials
Contact Supplier

Puyang Huicheng Electronic Material Co., Ltd

China (Mainland) Assessed Supplier

reasonable price professional supplier 2-Bromo-3-methylthiophene

  • Assay:98%
  • Appearance:yellow liquid
  • Package:100g/bottle; 500g/bottle 1 kg/bottle;25 kg/Drums or according to customer requirement
  • Storage:Sealed and stored in a dry and ventilated place. Keep away from light.
  • Transportation:By Courier or Air and Sea
  • Application:Pharmaceutical Intermediates
Contact Supplier

Amadis Chemical Co., Ltd.

China (Mainland) Assessed Supplier

Amadis Chemical offer CAS#14282-76-9;CAT#A3084

  • Assay:97%
  • Appearance:Powder or liquid
  • Package:According to customer
  • Storage:Store in a tightly closed container, in a cool and dry place.
  • Transportation:Fedex,DHL,TNT,BY SEA and BY AIR
  • Application:Medicinal Chemistry Biomedicine Pharmaceutical intermediates Chemistry experiment Biological experiments Chemical reagent For R&D use only.
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View