Benzene,(trichlorosilyl)-

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name
:
Trichloro(phenyl)silane
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
According to Regulation (EC) No1272/2008
Acute toxicity, Inhalation (Category 1)
Acute toxicity, Dermal (Category 4)
Skin corrosion (Category 1B)
According to European Directive 67/548/EEC as amended.
Harmful in contact with skin and if swallowed. Toxic by inhalation. Causes burns.
Label elements
Pictogram
Signal word
Hazard statement(s)
H312
H314
H330
Precautionary statement(s)
P260
P280
P284
P305 + P351 + P338
P310
Hazard symbol(s)
T
R-phrase(s)
R21/22
R23
R34
S-phrase(s)
S23
S26
S36/37/39
S45
Danger
Harmful in contact with skin.
Causes severe skin burns and eye damage.
Fatal if inhaled.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
Wear respiratory protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
Toxic
Harmful in contact with skin and if swallowed.
Toxic by inhalation.
Causes burns.
Do not breathe vapour.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
Other hazards
Lachrymator.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Synonyms
Formula
Molecular Weight
:
:
:
Phenyltrichlorosilane
Dow Corning? product Z-1216
C6H5Cl3Si
211,55 g/mol
CAS-No.
EC-No.
Classification
Concentration
Trichloro(phenyl)silane
98-13-5
202-640-8
-
Acute Tox. 1; Acute Tox. 4;
-
Skin Corr. 1B; H312, H314,
H330
T, R21/22 - R23 - R34
For the full text of the H-Statements mentioned in this Section, see Section 16.
4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing give artificial respiration Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult a physician.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate
personnel to safe areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic
charge.
Conditions for safe storage
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Moisture sensitive. Store under nitrogen.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with
multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Hand protection
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Handle with gloves.
Eye protection
Tightly fitting safety goggles. Faceshield (8-inch minimum).
Skin and body protection
Choose body protection according to the amount and concentration of the dangerous substance at the
work place.
Hygiene measures
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the
product.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Form
Colour
Safety data
pH
Melting point
Boiling point
Flash point
Ignition temperature
Lower explosion limit
Upper explosion limit
Density
Water solubility
Relative vapour
density
clear, liquid
colourless
no data available
no data available
201 °C - lit.
91 °C - closed cup
no data available
no data available
no data available
1,321 g/cm3 at 25 °C
no data available
7,3
- (Air = 1.0)
10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Conditions to avoid
no data available
Materials to avoid
Strong oxidizing agentsStrong acids, Strong bases, Strong oxidizing agents
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Hydrogen chloride gas,
silicon oxides
11. TOXICOLOGICAL INFORMATION
Acute toxicity
LD50 Oral - rat - 2.390 mg/kg
LC50 Inhalation - mouse - 2 h - 330 mg/m3
LD50 Intravenous - mouse - 100 mg/kg
Skin corrosion/irritation
Skin - rabbit -
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
Toxic if inhaled. Material is extremely destructive to the tissue of the mucous
membranes and upper respiratory tract.
Harmful if swallowed. Causes burns.
Harmful if absorbed through skin. Causes skin burns.
Causes eye burns.
Signs and Symptoms of Exposure
Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and
skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi,
pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath,
Headache, Nausea
Additional Information
RTECS: VV6650000
12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
PBT and vPvB assessment
no data available
Other adverse effects
no data available
13. DISPOSAL CONSIDERATIONS
Product
This combustible material may be burned in a chemical incinerator equipped with an afterburner and
scrubber. Observe all federal, state, and local environmental regulations. Contact a licensed professional
waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.
14. TRANSPORT INFORMATION
ADR/RID
UN-Number: 1804 Class: 8
Packing group: II
Proper shipping name: PHENYLTRICHLOROSILANE
IMDG
UN-Number: 1804 Class: 8
Packing group: II
EMS-No: F-A, S-B
Proper shipping name: PHENYLTRICHLOROSILANE
Marine pollutant: No
IATA
UN-Number: 1804 Class: 8
Packing group: II
Proper shipping name: Phenyltrichlorosilane
IATA Passenger: Not permitted for transport
15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
16. OTHER INFORMATION
Text of H-code(s) and R-phrase(s) mentioned in Section 3
Acute Tox.
H312
H314
H330
Skin Corr.
T
R21/22
R23
R34
Acute toxicity
Harmful in contact with skin.
Causes severe skin burns and eye damage.
Fatal if inhaled.
Skin corrosion
Toxic
Harmful in contact with skin and if swallowed.
Toxic by inhalation.
Causes burns.
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.
;

Recommended suppliers

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

Phenyltrichlorosilane

  • Assay:Industrial Grade,
  • Appearance:detailed see specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by sea or by air
  • Application:It is an important raw material and intermediate used in Organic Synthesis, Pharmaceuticals, Agrochemicals and Dyestuff.
Contact Supplier

Simagchem Corporation

China (Mainland) Assessed Supplier

High quality Phenyltrichlorosilane with high purity

  • Assay:99%
  • Appearance:white-off solid or colorless liquid ( referto COA)
  • Package:25kgs/fiber drum or 200kgs/UN drum
  • Storage:in a cool and dry place
  • Transportation:by sea or by air
  • Application:Organic intermediates
Contact Supplier

Hebei yanxi chemical co.,LTD.

China (Mainland) Assessed Supplier

Trichloro(phenyl)silane CAS NO.98-13-5

  • Assay:10KG,10g,
  • Appearance:crystal, powder
  • Package:as your request
  • Storage:stay in dry, cool and well-sealed
  • Transportation:EMS,HK EMS,FEDEX,DHL,TNT
  • Application:Pharmaceutical intermediates
Contact Supplier

Henan Allgreen Chemical Co.,Ltd

China (Mainland) Assessed Supplier

Phenyltrichlorosilane

  • Assay:98%
  • Appearance:White or off-white Solid
  • Package:According to the demand of customer
  • Storage:Sealed, dry, microtherm , avoid light and smell.
  • Transportation:by air or by sea
  • Application:Organic synthesis
Contact Supplier

Ality Chemical Corporation

China (Mainland) Assessed Supplier

Factory Supply Phenyltrichlorosilane

  • Assay:99.9%
  • Appearance:Refer to COA
  • Package:drum
  • Storage:keep in cool and dry place
  • Transportation:by sea or by air
  • Application:Intermediates and materials
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View