Benzene, ethenylmethyl-

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name
:
Methylstyrene
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
According to Regulation (EC) No1272/2008
Flammable liquids (Category 3)
Skin irritation (Category 2)
Eye irritation (Category 2)
According to European Directive 67/548/EEC as amended.
Flammable. Irritating to eyes, respiratory system and skin.
Label elements
Pictogram
Signal word
Hazard statement(s)
H226
H315
H319
Precautionary statement(s)
P305 + P351 + P338
Warning
Flammable liquid and vapour.
Causes skin irritation.
Causes serious eye irritation.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Hazard symbol(s)
Xi
R-phrase(s)
R10
R36/37/38
S-phrase(s)
S26
Irritant
Flammable.
Irritating to eyes, respiratory system and skin.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Other hazards - none
3. COMPOSITION/INFORMATION ON INGREDIENTS
Synonyms
Formula
:
:
Vinyltoluene
C9H10
CAS-No.
EC-No.
Classification
Concentration
Vinyltoluene
25013-15-4
246-562-2
-
Flam. Liq. 3; Skin Irrit. 2; Eye
-
Irrit. 2; H226, H315, H319
Xi, R10 - R36/37/38
tert-Butylpyrocatechol
27213-78-1
248-325-9
-
Skin Sens. 1; H317
0,005 %
Xi, R43
For the full text of the H-Statements mentioned in this Section, see Section 16.
4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult a physician.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large fires,
apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or spray;
solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
Use water spray to cool unopened containers.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment. Avoid breathing vapors, mist or gas. Remove all sources of ignition.
Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place
in container for disposal according to local regulations (see section 13).
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic
charge.
Conditions for safe storage
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully
resealed and kept upright to prevent leakage.
Recommended storage temperature: 2 - 8 °C
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with
multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Hand protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without
touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves
after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Eye protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU).
Skin and body protection
impervious clothing, Flame retardant antistatic protective clothing, The type of protective equipment must
be selected according to the concentration and amount of the dangerous substance at the specific
workplace.
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Form
Colour
Safety data
pH
Melting point
Boiling point
Flash point
Ignition temperature
Lower explosion limit
Upper explosion limit
Vapour pressure
Density
Water solubility
liquid
colourless
no data available
-77,0 °C
168 °C - lit.
52 °C - closed cup
575 °C
1,1 %(V)
5,2 %(V)
1,47 hPa at 20 °C
0,893 g/cm3 at 25 °C
insoluble
10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Conditions to avoid
Heat, flames and sparks.
Materials to avoid
Strong oxidizing agents, Strong acids
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides
Contains the following stabiliser(s):
tert-Butylpyrocatechol (0,005 %)
11. TOXICOLOGICAL INFORMATION
Acute toxicity
LD50 Oral - rat - 2.255 mg/kg
Remarks: Behavioral:Somnolence (general depressed activity).
LC50 Inhalation - mouse - 4 h - 0,03 mg/l
Skin corrosion/irritation
Skin - rabbit - Skin irritation
Remarks: Moderate skin irritation
Serious eye damage/eye irritation
Eyes - rabbit - Mild eye irritation
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
Genotoxicity in vitro - mouse - lymphocyte
Mutation in mammalian somatic cells.
Genotoxicity in vivo - mouse - Intraperitoneal
Micronucleus test
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
IARC: 3 - Group 3: Not classifiable as to its carcinogenicity to humans (Vinyltoluene)
Reproductive toxicity
Developmental Toxicity - rat - Intraperitoneal
Effects on Embryo or Fetus: Fetotoxicity (except death, e.g., stunted fetus).
Specific target organ toxicity - single exposure
Specific target organ toxicity - repeated exposure
Aspiration hazard
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. May cause respiratory tract irritation.
May be harmful if swallowed.
May be harmful if absorbed through skin. May cause skin irritation.
May cause eye irritation.
Signs and Symptoms of Exposure
May cause irritation of the:, Eyes, Skin, Ingestion may cause gastrointestinal irritation, nausea, vomiting and
diarrhoea., peripheral neuropathy, Central nervous system
Additional Information
RTECS: Not available
12. ECOLOGICAL INFORMATION
Toxicity
Toxicity to fish
LC50 - other fish - 23,4 mg/l - 96 h
Persistence and degradability
no data available
Bioaccumulative potential
Mobility in soil
PBT and vPvB assessment
no data available
Other adverse effects
no data available
13. DISPOSAL CONSIDERATIONS
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as
this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company.
Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.
14. TRANSPORT INFORMATION
ADR/RID
UN-Number: 2618 Class: 3
Packing group: III
Proper shipping name: VINYLTOLUENES, STABILIZED
IMDG
UN-Number: 2618 Class: 3
Packing group: III
EMS-No: F-E, S-D
Proper shipping name: VINYLTOLUENES, STABILIZED
Marine pollutant: No
IATA
UN-Number: 2618 Class: 3
Packing group: III
Proper shipping name: Vinyltoluenes, stabilized
15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
16. OTHER INFORMATION
Text of H-code(s) and R-phrase(s) mentioned in Section 3
Eye Irrit.
Flam. Liq.
H226
H315
H317
H319
Skin Irrit.
Skin Sens.
Xi
R10
R36/37/38
R43
Eye irritation
Flammable liquids
Flammable liquid and vapour.
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
Skin irritation
Skin sensitization
Irritant
Flammable.
Irritating to eyes, respiratory system and skin.
May cause sensitization by skin contact.
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.
;

Recommended suppliers

Henan Allgreen Chemical Co.,Ltd

China (Mainland) Assessed Supplier

Vinyltoluene MonoMer (M- and p- Mixture) (stabilized with TBC)

  • Assay:98%
  • Appearance:White or off-white Solid
  • Package:According to the demand of customer
  • Storage:Sealed, dry, microtherm , avoid light and smell.
  • Transportation:by air or by sea
  • Application:Organic synthesis
Contact Supplier

Ality Chemical Corporation

China (Mainland) Assessed Supplier

Factory Supply Vinyltoluene

  • Assay:99.9%
  • Appearance:Refer to COA
  • Package:drum
  • Storage:keep in cool and dry place
  • Transportation:by sea or by air
  • Application:Intermediates and materials
Contact Supplier

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

Vinyltoluene

  • Assay:Industrial Grade ,
  • Appearance:detailed see specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by air or by sea
  • Application:Used in Synthesis, Pharmaceuticals and other fields
Contact Supplier

Chemwill Asia Co., Ltd.

China (Mainland) Assessed Supplier

CHemwill -- Methylstyrene / Vinyltoluene

  • Assay:1,
  • Appearance:As per COA
  • Package:export standard
  • Storage:high quality and we have in stock
  • Transportation:By AIR or by SEA
  • Application:It is an important raw material and intermediate for chemical industry.
Contact Supplier

Hangzhou J&H Chemical Co., Ltd.

China (Mainland) Assessed Supplier

Benzene, ethenylmethyl-

  • Assay:98%min
  • Appearance:Off-white to light yellow powder
  • Package:According to the clients requirement.
  • Storage:Keep in cool place.
  • Transportation:
  • Application:Pharmaceutical intermediates
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View