Benzyldodecyldimethylammonium bromide

1.
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1
Product identifiers
Product name
CAS-No.
:
:
Benzyldodecyldimethylammonium bromide
7281-04-1
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Oral (Category 3)
Skin irritation (Category 2)
Eye irritation (Category 2)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Harmful if swallowed. Irritating to eyes, respiratory system and skin.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H301
H315
H319
H335
Precautionary statement(s)
P261
P301 + P310
P305 + P351 + P338
Supplemental Hazard
Danger
Toxic if swallowed.
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/
physician.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R22
R36/37/38
S-phrase(s)
S26
S36
Harmful if swallowed.
Irritating to eyes, respiratory system and skin.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear suitable protective clothing.
2.3
3.
3.1
Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula
Molecular Weight
Component
:
:
C21H38BrN
384,45 g/mol
Concentration
Benzyldodecyldimethylammonium bromide
4.
4.1
CAS-No.
EC-No.
FIRST AID MEASURES
Description of first aid measures
7281-04-1
230-698-4
-
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2
4.3
5.
5.1
5.2
5.3
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8.
8.1
8.2
9.
9.1
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Indication of immediate medical attention and special treatment needed
no data available
FIRE-FIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Hydrogen bromide gas
Precautions for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate
ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the
product.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such as
NIOSH (US) or CEN (EU).
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
e)
f)
g)
h)
Appearance
Odour
Odour Threshold
pH
Melting/freezing point
Initial boiling point and
boiling range
Flash point
Evaporation rate
Form: solid
Colour: white
no data available
no data available
no data available
Melting point/range: 46 - 48 °C
no data available
110 °C - closed cup
no data available
i)
Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
no data available
no data available
m) Relative density
no data available
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
no data available
no data available
no data available
no data available
no data available
no data available
no data available
9.2
10.
10.1
10.2
10.3
10.4
10.5
10.6
11.
11.1
Other safety information
no data available
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
LD50 Oral - rat - 230 mg/kg
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. Causes respiratory tract irritation.
Toxic if swallowed.
May be harmful if absorbed through skin. Causes skin irritation.
Causes serious eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Additional Information
RTECS: BO7875000
12.
12.1
12.2
12.3
12.4
12.5
12.6
13.
13.1
14.
14.1
ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
Avoid release to the environment.
no data available
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional
waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent
and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN-Number
14.2
ADR/RID: 2811
UN proper shipping name
IMDG: 2811
IATA: 2811
ADR/RID:
IMDG:
IATA:
TOXIC SOLID, ORGANIC, N.O.S. (Benzyldodecyldimethylammonium bromide)
TOXIC SOLID, ORGANIC, N.O.S. (Benzyldodecyldimethylammonium bromide)
Toxic solid, organic, n.o.s. (Benzyldodecyldimethylammonium bromide)
14.3
Transport hazard class(es)
14.4
14.5
14.6
15.
ADR/RID: 6.1
Packaging group
ADR/RID: III
Environmental hazards
ADR/RID: no
Special precautions for users
no data available
REGULATORY INFORMATION
IMDG: 6.1
IMDG: III
IMDG Marine pollutant: no
IATA: 6.1
IATA: III
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
16.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
OTHER INFORMATION
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.
;

Recommended suppliers

Hangzhou Lingrui Chemical Co.,Ltd.

China (Mainland) Assessed Supplier

Benzyldodecyldimethylammonium bromide

  • Assay:98%,99%,
  • Appearance:Colorless solid
  • Package:according to customers' requirements
  • Storage:Store in cool drying
  • Transportation:By air(EMS or EUB or FedEx or TNT ect...) or by sea(FOB or CIF or CNF ect...)or according to your demand.
  • Application:An important raw material An important raw material
Contact Supplier

Simagchem Corporation

China (Mainland) Assessed Supplier

High quality Dodecyl Dimethyl Benzyl Ammonium Bromide supplier in China

  • Assay:99%
  • Appearance:white-off solid or colorless liquid ( referto COA)
  • Package:25kgs/fiber drum or 200kgs/UN drum
  • Storage:in a cool and dry place
  • Transportation:by sea or by air
  • Application:Surfactants
Contact Supplier

Kono Chem Co.,Ltd

China (Mainland) Assessed Supplier

CAS: 7281-04-1 Benzyldodecyldimethylammonium bromide in stock

  • Assay:95%
  • Appearance: Colorless Transparent Liquid
  • Package:1kg/foil bag; 25kg/drum
  • Storage:cool and dry area, avoiding light
  • Transportation:by sea, by air,by express
  • Application:organic intermediate
Contact Supplier

Jinan Finer Chemical Co., Ltd

China (Mainland) Assessed Supplier

Benzyldodecyldimethylammonium bromide

  • Assay:1,
  • Appearance:Light yellow clear liquid; light yellow colloid or waxy solid
  • Package:1kg/bottle, 25kg/drum, or as your demand
  • Storage:dry
  • Transportation:By air, by sea or by courier (VIP account of TNT, DHL, Fedex and EMS)
  • Application:1. Used as a bacteriostatic preservative. Used in livestock, poultry, bee, silkworm and other breeding environment, equipment, wounds, skin, surface of objects and indoor environment to inhibit bacte
Contact Supplier

Wuhan Fortuna Chemical Co.,Ltd

China (Mainland) Assessed Supplier

Manufacturer good quality Benzyldodecyldimethylammonium Bromide Cas 7281-04-1 with fast delivery

  • Assay:98%,
  • Appearance:Liquid
  • Package:50kg/drum
  • Storage:2-8°C
  • Transportation:BY SEA/AIR/COURIER
  • Application:Pharm/Industry
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View