1H-Pyrrole-2,5-dione,1-methyl-

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name
:
N -Methylmaleimide
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
According to Regulation (EC) No1272/2008
Acute toxicity, Oral (Category 4)
Skin corrosion (Category 1B)
Skin sensitization (Category 1)
According to European Directive 67/548/EEC as amended.
Harmful if swallowed. Causes burns. May cause sensitization by skin contact.
Label elements
Pictogram
Signal word
Hazard statement(s)
H302
H314
H317
Precautionary statement(s)
P280
P305 + P351 + P338
P310
Hazard symbol(s)
C
R-phrase(s)
R22
R34
R43
S-phrase(s)
S26
S36/37/39
S45
Danger
Harmful if swallowed.
Causes severe skin burns and eye damage.
May cause an allergic skin reaction.
Wear protective gloves/protective clothing/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician.
Corrosive
Harmful if swallowed.
Causes burns.
May cause sensitization by skin contact.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
Other hazards
Vesicant.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Formula
Molecular Weight
:
:
C5H5NO2
111,1 g/mol
CAS-No.
EC-No.
Classification
Concentration
N-Methylmaleimide
930-88-1
213-226-1
-
Acute Tox. 4; Skin Corr. 1B;
-
Skin Sens. 1; H302, H314,
H317
C, R22 - R34 - R43
For the full text of the H-Statements mentioned in this Section, see Section 16.
4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing give artificial respiration Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult a physician.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment. Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Keep in suitable, closed containers for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed. Normal measures for preventive fire
protection.
Conditions for safe storage
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator
type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the
respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and
components tested and approved under appropriate government standards such as NIOSH (US) or CEN
(EU).
Hand protection
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Handle with gloves.
Eye protection
Face shield and safety glasses
Skin and body protection
Choose body protection according to the amount and concentration of the dangerous substance at the
work place.
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Form
Colour
Safety data
pH
Melting point
Boiling point
Flash point
Ignition temperature
Lower explosion limit
Upper explosion limit
Water solubility
solid
white
no data available
94 - 96 °C - lit.
no data available
no data available
no data available
no data available
no data available
no data available
10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Conditions to avoid
no data available
Materials to avoid
Strong oxidizing agents, Strong acids
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, nitrogen oxides (NOx)
11. TOXICOLOGICAL INFORMATION
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
May cause allergic skin reaction.
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. Material is extremely destructive to the tissue of the
mucous membranes and upper respiratory tract.
Harmful if swallowed. Causes burns.
May be harmful if absorbed through skin. Causes skin burns.
Causes eye burns.
Signs and Symptoms of Exposure
Cough, Shortness of breath, Headache, Nausea, Vomiting
Additional Information
RTECS: ON5600000
12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
PBT and vPvB assessment
no data available
Other adverse effects
no data available
13. DISPOSAL CONSIDERATIONS
Product
Observe all federal, state, and local environmental regulations. Contact a licensed professional waste
disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn
in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
14. TRANSPORT INFORMATION
ADR/RID
UN-Number: 1759 Class: 8
Packing group: II
Proper shipping name: CORROSIVE SOLID, N.O.S. (N-Methylmaleimide)
IMDG
UN-Number: 1759 Class: 8
Packing group: II
EMS-No: F-A, S-B
Proper shipping name: CORROSIVE SOLID, N.O.S. (N-Methylmaleimide)
Marine pollutant: No
IATA
UN-Number: 1759 Class: 8
Packing group: II
Proper shipping name: Corrosive solid, n.o.s. (N-Methylmaleimide)
15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
16. OTHER INFORMATION
Text of H-code(s) and R-phrase(s) mentioned in Section 3
Acute Tox.
H302
H314
H317
Skin Corr.
Skin Sens.
C
R22
R34
R43
Acute toxicity
Harmful if swallowed.
Causes severe skin burns and eye damage.
May cause an allergic skin reaction.
Skin corrosion
Skin sensitization
Corrosive
Harmful if swallowed.
Causes burns.
May cause sensitization by skin contact.
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.
;

Recommended suppliers

Wuhan Fortuna Chemical Co.,Ltd

China (Mainland) Assessed Supplier

Manufacturer high quality N-Methylmaleimide Cas 930-88-1 with good price and fast delivery

  • Assay:98%min
  • Appearance:Off-white to white powder
  • Package:1kg/foil bag;25kg/drum
  • Storage:cool dry place
  • Transportation:by courier/by air/by sea
  • Application:N-Methylmaleimide is an electron deficient olefin that acts as a thiol-blocking reagent.
Contact Supplier

Amadis Chemical Co., Ltd.

China (Mainland) Assessed Supplier

Amadis Chemical offer CAS#930-88-1;CAT#A844441

  • Assay:97%
  • Appearance:Powder or liquid
  • Package:According to customer
  • Storage:Store in a tightly closed container, in a cool and dry place.
  • Transportation:Fedex,DHL,TNT,BY SEA and BY AIR
  • Application:Medicinal Chemistry Biomedicine Pharmaceutical intermediates Chemistry experiment Biological experiments Chemical reagent For R&D use only.
Contact Supplier

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

N-Methylmaleimide

  • Assay:Industrial Grade,
  • Appearance:detailed see specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by air or by sea
  • Application:Used in Synthesis, Pharmaceuticals and other fields
Contact Supplier

Chemwill Asia Co., Ltd.

China (Mainland) Assessed Supplier

N-Methylmaleimide

  • Assay:1,d,
  • Appearance:As per Certificate of analysis and our TDS, MSDS
  • Package:Export standard and according to the clients requirement
  • Storage:Store in dry, dark and ventilated place;ISO / Kosher /GMP licence commercial bulk capacity factory in China
  • Transportation:By AIR or by SEA GMP licence / US-FDA,South Korea-KFDA
  • Application:It is an important raw material and intermediate for chemical industry.
Contact Supplier

HENAN NEW BLUE CHEMICAL CO.,LTD

China (Mainland) Assessed Supplier

930-88-1

  • Assay:1,
  • Appearance:White powder
  • Package:25KGS/Drum
  • Storage:Room temperature
  • Transportation:BY SEA
  • Application:API,Pharmaceutical intermediates
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View