Phthalic anhydride

1.
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1
Product identifiers
Product name
CAS-No.
:
:
Phthalic anhydride
85-44-9
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Oral (Category 4)
Skin irritation (Category 2)
Serious eye damage (Category 1)
Respiratory sensitization (Category 1)
Skin sensitization (Category 1)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
May cause sensitization by inhalation and skin contact. Irritating to respiratory system and skin. Risk of
serious damage to eyes. Harmful if swallowed.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H302
H315
H317
H318
H334
H335
Precautionary statement(s)
P261
P280
P305 + P351 + P338
P342 + P311
Supplemental Hazard
Danger
Harmful if swallowed.
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye damage.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause respiratory irritation.
Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
Wear protective gloves/ eye protection/ face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
If experiencing respiratory symptoms: Call a POISON CENTER or doctor/
physician.
none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R22
R37/38
R41
R42/43
S-phrase(s)
S23
S24/25
S26
S37/39
S46
Harmful if swallowed.
Irritating to respiratory system and skin.
Risk of serious damage to eyes.
May cause sensitization by inhalation and skin contact.
Do not breathe gas/fumes/vapour/spray.
Avoid contact with skin and eyes.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear suitable gloves and eye/face protection.
If swallowed, seek medical advice immediately and show this container or
label.
2.3
3.
3.1
Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula
Molecular Weight
Component
Phthalic anhydride
:
:
C8H4O3
148,12 g/mol
Concentration
4.
4.1
CAS-No.
EC-No.
FIRST AID MEASURES
Description of first aid measures
85-44-9
201-607-5
-
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult a physician.
4.2
4.3
5.
5.1
5.2
5.3
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8.
8.1
8.2
9.
9.1
Most important symptoms and effects, both acute and delayed
prolonged or repeated exposure can cause:, Liver injury may occur., Kidney injury may occur., Exposure to
and/or consumption of alcohol may increase toxic effects., To the best of our knowledge, the chemical,
physical, and toxicological properties have not been thoroughly investigated.
Indication of immediate medical attention and special treatment needed
no data available
FIRE-FIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Precautions for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Store under inert gas. Moisture sensitive.
Specific end uses
no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such as
NIOSH (US) or CEN (EU).
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
e)
f)
g)
h)
Appearance
Odour
Odour Threshold
pH
Melting/freezing point
Initial boiling point and
boiling range
Flash point
Evaporation rate
Form: flakes
Colour: white
no data available
no data available
2 at 6 g/l at 20 °C
Melting point/range: 129 - 133 °C
284 °C - lit.
152 °C - closed cup
no data available
i)
Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
Upper explosion limit: 10,4 %(V)
Lower explosion limit: 1,7 %(V)
< 0,01 hPa at 20 °C
no data available
m) Relative density
1,530 g/cm3 at 20 °C
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
ca.5 g/l
no data available
no data available
no data available
no data available
no data available
no data available
9.2
Other safety information
Surface tension
32,7 mN/m at 180 °C
10.
10.1
10.2
10.3
10.4
10.5
10.6
11.
11.1
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
Avoid moisture.
Incompatible materials
Strong acids, Strong bases, Strong oxidizing agents, Strong reducing agents
Hazardous decomposition products
Other decomposition products - no data available
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
LD50 Oral - rat - 1.530 mg/kg
Remarks: Behavioral:Somnolence (general depressed activity).
LC50 Inhalation - rat - 1 h - > 210 mg/m3
LD50 Dermal - rabbit - > 10.000 mg/kg
Skin corrosion/irritation
Skin - rabbit - Mild skin irritation - 24 h
Serious eye damage/eye irritation
Eyes - rabbit - Moderate eye irritation
Respiratory or skin sensitization
no data available
May cause allergic respiratory and skin reactions
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. Material is extremely destructive to the tissue of
the mucous membranes and upper respiratory tract. Causes respiratory
tract irritation.
Harmful if swallowed. Causes burns.
May be harmful if absorbed through skin. Causes skin burns.
Causes eye burns.
Signs and Symptoms of Exposure
prolonged or repeated exposure can cause:, Liver injury may occur., Kidney injury may occur., Exposure to
and/or consumption of alcohol may increase toxic effects., To the best of our knowledge, the chemical,
physical, and toxicological properties have not been thoroughly investigated.
Additional Information
RTECS: TI3150000
12.
12.1
ECOLOGICAL INFORMATION
Toxicity
Toxicity to fish
Toxicity to algae
LC0 - Oncorhynchus mykiss (rainbow trout) - 5 mg/l - 48 h
EC50 - Pseudokirchneriella subcapitata (green algae) - 60 - 350 mg/l - 96 h
12.2
12.3
12.4
12.5
12.6
13.
13.1
14.
14.1
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
Harmful to aquatic life.
no data available
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional
waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent
and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN-Number
14.2
14.3
14.4
14.5
14.6
15.
ADR/RID: -
UN proper shipping name
ADR/RID:
Not dangerous goods
IMDG:
Not dangerous goods
IATA:
Not dangerous goods
Transport hazard class(es)
ADR/RID: -
Packaging group
ADR/RID: -
Environmental hazards
ADR/RID: no
Special precautions for users
no data available
REGULATORY INFORMATION
IMDG: -
IMDG: -
IMDG: -
IMDG Marine pollutant: no
IATA: -
IATA: -
IATA: -
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
16.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
OTHER INFORMATION
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.
;

Recommended suppliers

HENAN NEW BLUE CHEMICAL CO.,LTD

China (Mainland) Assessed Supplier

85-44-9

  • Assay:1,
  • Appearance:
  • Package:25KGS/Drum
  • Storage:Room temperature
  • Transportation:BY SEA
  • Application:Organic Chemicals
Contact Supplier

Wuhan Biet Co., Ltd

China (Mainland) Assessed Supplier

Industrial Grade Phthalic Anhydride 85-44-9

  • Assay:Tech grade,
  • Appearance:White flake or crystalline powder
  • Package:25kg/bag
  • Storage:Store in a cool, dry, ventilated environment.Store below 149℃.
  • Transportation:Store and handle in accordance with all current regulations and standards.
  • Application:stabilizer
Contact Supplier

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

Phthalic anhydride Manufacturer/High quality/Best price/In stock

  • Assay:Industrial Grade,
  • Appearance:White scale-like or crystal powder
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by sea or by air
  • Application:It is an important raw material and intermediate used in Organic Synthesis, Pharmaceuticals, Agrochemicals and Dyestuff.
Contact Supplier

Hebei yanxi chemical co.,LTD.

China (Mainland) Assessed Supplier

o-Phthalic anhydride 85-44-9

  • Assay:10KG,10g,
  • Appearance:appearance White powder
  • Package:as your request
  • Storage:Dry and ventilated
  • Transportation:EMS,HK EMS,FEDEX,DHL,TNT
  • Application:Widely used in cosmetics, medicine, beauty health food and other industries
Contact Supplier

Jinan Finer Chemical Co., Ltd

China (Mainland) Assessed Supplier

Phthalic anhydride

  • Assay:1,
  • Appearance:White flake
  • Package:suitable for delivery
  • Storage:Keep cool and dry
  • Transportation:Aluminum foil bag for within 10kg Fiber drum for 10kg and more Shipping: By air, by sea or by courier (VIP account of TNT, DHL, Fedex and EMS)
  • Application:Plastic plasticizers, alkyd resins, dyes, unsaturated resins, pharmaceuticals, pesticides, electronic, agricultural, coating and other industrials.
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View