Magnesocene

1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name
:
Bis(cyclopentadienyl)magnesium(II)
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
According to Regulation (EC) No1272/2008
Flammable solids (Category 2)
Pyrophoric solids (Category 1)
Substances, which in contact with water, emit flammable gases (Category 2)
Skin corrosion (Category 1B)
Serious eye damage (Category 1)
According to European Directive 67/548/EEC as amended.
Highly flammable. Reacts violently with water. Spontaneously flammable in air. Causes burns.
Label elements
Pictogram
Signal word
Hazard statement(s)
H228
H250
H261
H314
EUH014
Precautionary statement(s)
P210
P222
P231 + P232
P280
P305 + P351 + P338
P422
Hazard symbol(s)
F
C
R-phrase(s)
R11
R14
R17
R34
S-phrase(s)
S8
S26
S36/37/39
S43
S45
Danger
Flammable solid
Catches fire spontaneously if exposed to air.
In contact with water releases flammable gases.
Causes severe skin burns and eye damage.
Reacts violently with water.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Do not allow contact with air.
Handle under inert gas. Protect from moisture.
Wear protective gloves/ protective clothing/ eye protection/ face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Store contents under inert gas.
Highly flammable
Corrosive
Highly flammable.
Reacts violently with water.
Spontaneously flammable in air.
Causes burns.
Keep container dry.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
In case of fire, use fire-fighting equipment on basis class D.
In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
Other hazards - none
3. COMPOSITION/INFORMATION ON INGREDIENTS
Synonyms
Formula
Molecular Weight
:
:
:
MgCp2
C10H10Mg
154,49 g/mol
CAS-No.
EC-No.
Classification
Concentration
Bis(cyclopentadienyl)magnesium(II)
1284-72-6
-
-
Flam. Sol. 2; Pyrophoric solid
-
1; Water-react 2; Skin Corr.
1B; Eye Dam. 1; H228, H250,
H261, H314, EUH014
F, C, R11 - R14 - R17 - R34
For the full text of the H-Statements mentioned in this Section, see Section 16.
4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult a physician.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Carbon dioxide (CO2) Dry powder
Extinguishing media which shall not be used for safety reasons
Water
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or by
wet-brushing and place in container for disposal according to local regulations (see section 13). Do not flush
with water. Keep in suitable, closed containers for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed. Keep away from sources of ignition -
No smoking. Take measures to prevent the build up of electrostatic charge.
Conditions for safe storage
Keep container tightly closed in a dry and well-ventilated place. Store in cool place.
Never allow product to get in contact with water during storage.
Air and moisture sensitive. Store under inert gas.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator
type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the
respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and
components tested and approved under appropriate government standards such as NIOSH (US) or CEN
(EU).
Hand protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without
touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves
after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Protective gloves against thermal risks
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Eye protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU).
Skin and body protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type of
protective equipment must be selected according to the concentration and amount of the dangerous
substance at the specific workplace.
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Form
Colour
Safety data
pH
Melting point
Boiling point
Flash point
Flammability (solid,
gas)
Ignition temperature
Lower explosion limit
Upper explosion limit
Vapour pressure
Water solubility
solid
white
no data available
180 °C - dec.
50 °C at 0,1 hPa
no data available
The substance or mixture is a flammable solid with the subcategory 2.
Auto-flammability
no data available
no data available
1,00 hPa at 60 °C
0,05 hPa at 25 °C
Decomposes in contact with water.
10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
Reacts violently with water.
Conditions to avoid
Heat, flames and sparks. Extremes of temperature and direct sunlight. Exposure to moisture.
Materials to avoid
Bases, Oxidizing agents, acids, Alcohols, Water, These compounds ignite in air and may react explosively with
water
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Magnesium oxide
Thermal decomposition
Thermal sensitivity
11. TOXICOLOGICAL INFORMATION
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. Material is extremely destructive to the tissue of the
mucous membranes and upper respiratory tract.
May be harmful if swallowed. Causes burns.
May be harmful if absorbed through skin. Causes skin burns.
Causes eye burns.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Additional Information
RTECS: Not available
12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
PBT and vPvB assessment
no data available
Other adverse effects
no data available
13. DISPOSAL CONSIDERATIONS
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as
this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company.
Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.
14. TRANSPORT INFORMATION
ADR/RID
UN-Number: 3393 Class: 4.2 (4.3) Packing group: I
Proper shipping name: ORGANOMETALLIC SUBSTANCE, SOLID, PYROPHORIC, WATER-REACTIVE
(Bis(cyclopentadienyl)magnesium(II))
IMDG
UN-Number: 3393 Class: 4.2 (4.3) Packing group: I EMS-No: F-G, S-M
Proper shipping name: ORGANOMETALLIC SUBSTANCE, SOLID, PYROPHORIC, WATER-REACTIVE
(Bis(cyclopentadienyl)magnesium(II))
Marine pollutant: No
IATA
UN-Number: 3393 Class: 4.2 (4.3)
Proper shipping name: Organometallic substance, solid, pyrophoric, water-reactive
(Bis(cyclopentadienyl)magnesium(II))
IATA Passenger: Not permitted for transport
IATA Cargo: Not permitted for transport
15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
16. OTHER INFORMATION
Text of H-code(s) and R-phrase(s) mentioned in Section 3
EUH014
Eye Dam.
Flam. Sol.
H228
H250
H261
H314
Pyrophoric solid
C
F
R11
R14
R17
R34
Reacts violently with water.
Serious eye damage
Flammable solids
Flammable solid
Catches fire spontaneously if exposed to air.
In contact with water releases flammable gases.
Causes severe skin burns and eye damage.
Pyrophoric solids
Corrosive
Highly flammable
Highly flammable.
Reacts violently with water.
Spontaneously flammable in air.
Causes burns.
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.
;

Recommended suppliers

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

Bis(cyclopentadienyl)magnesium

  • Assay:Industrial Grade,
  • Appearance:detailed in specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by air or by ocean shipping
  • Application:An important raw material and intermediate used in Organic Synthesis, Pharmaceuticals
Contact Supplier

Amadis Chemical Co., Ltd.

China (Mainland) Assessed Supplier

Amadis Chemical offer CAS#1284-72-6;CAT#A805827

  • Assay:97%
  • Appearance:Powder or liquid
  • Package:According to customer
  • Storage:Store in a tightly closed container, in a cool and dry place.
  • Transportation:Fedex,DHL,TNT,BY SEA and BY AIR
  • Application:Medicinal Chemistry Biomedicine Pharmaceutical intermediates Chemistry experiment Biological experiments Chemical reagent For R&D use only.
Contact Supplier

Chemwill Asia Co., Ltd.

China (Mainland) Assessed Supplier

Magnesocene

  • Assay:1,d,
  • Appearance:As per Certificate of analysis and our TDS, MSDS
  • Package:Export standard and according to the clients requirement
  • Storage:Store in dry, dark and ventilated place;ISO / Kosher /GMP licence commercial bulk capacity factory in China
  • Transportation:By AIR or by SEA GMP licence / US-FDA,South Korea-KFDA
  • Application:It is an important raw material and intermediate for chemical industry.
Contact Supplier

HENAN NEW BLUE CHEMICAL CO.,LTD

China (Mainland) Assessed Supplier

BIS(CYCLOPENTADIENYL)MAGNESIUM

  • Assay:1,
  • Appearance:White powder
  • Package:25KGS/Drum
  • Storage:Room temperature
  • Transportation:BY SEA
  • Application:API,Pharmaceutical intermediates
Contact Supplier

Hebei Nengqian Chemical Import and Export Co., LTD

China (Mainland) Assessed Supplier

BIS(CYCLOPENTADIENYL)MAGNESIUM CAS 1284-72-6

  • Assay:Pharmaceutical grade,
  • Appearance:White crystal
  • Package:Inside plastic outside
  • Storage:It can be stored in a sealed and dry place.
  • Transportation:We ship goods via DHL, Fedex, UPS, TNT, China post, NL Post and other couriers, weight from 10g to 1000kg or even bulker
  • Application:It is a very useful reagent for introducing cyclopentadienyl groups into transition metals.
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View