Benzene,1-bromo-3,5-difluoro-2-iodo-
A15762 ?? 2?Bromo??4,6?difluoroiodobenzene
Material Safety Data Sheet
acc. to OSHA and ANSI
?? 1 Identification of substance:
?? Product details:
?? Product name: 2?Bromo??4,6?difluoroiodobenzene
?? 2 Composition/Data on components:
?? Chemical characterization:
Description: (CAS#)
Material Safety Data Sheet 1
A15762 ?? 2?Bromo??4,6?difluoroiodobenzene
2?Bromo??4,6?difluoroiodobenzene
(CAS# 175278??11??2): 100%
?? 3 Hazards identification
?? Hazard description: Xi Irritant
?? Information pertaining to particular dangers for man and
environment
R 36/37/38 Irritating to eyes, respiratory system and skin.
?? Classification system
?? HMIS ratings (scale 0??4)
(Hazardous Materials Identification System)
Health (acute effects) = 1
Flammability = 1
Reactivity = 1
?? 4 First aid measures
?? After inhalation
Supply fresh air. If required, provide artificial respiration.
Keep patient warm.
Seek immediate medical advice.
?? After skin contact
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
?? After eye contact
Rinse opened eye for several minutes under running water. Then
consult a doctor.
?? After swallowing Seek immediate medical advice.
?? 5 Fire fighting measures
?? Suitable extinguishing agents
Material Safety Data Sheet 2
A15762 ?? 2?Bromo??4,6?difluoroiodobenzene
Carbon dioxide, extinguishing powder or water spray. Fight
larger fires with water spray or alcohol resistant foam.
?? Special hazards caused by the material, its products of
combustion or
resulting gases:
In case of fire, the following can be released:
Carbon monoxide and carbon dioxide
Hydrogen fluoride (HF)
Hydrogen bromide (HBr)
Hydrogen iodide (HI)
?? Protective equipment:
Wear self?contained respirator.
Wear fully protective impervious suit.
?? 6 Accidental release measures
?? Person?related safety precautions:
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
?? Measures for environmental protection:
Do not allow material to be released to the environment
without proper governmental permits.
?? Measures for cleaning/collecting:
Absorb with liquid?binding material (sand, diatomite, acid
binders, universal binders, sawdust).
Ensure adequate ventilation.
?? Additional information:
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
?? 7 Handling and storage
?? Handling
Material Safety Data Sheet 3
A15762 ?? 2?Bromo??4,6?difluoroiodobenzene
?? Information for safe handling:
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
?? Information about protection against explosions and fires:
Keep ignition sources away.
?? Storage
?? Requirements to be met by storerooms and receptacles:
No special requirements.
?? Information about storage in one common storage facility:
Store away from oxidizing agents.
?? Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.
?? 8 Exposure controls and personal protection
?? Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous
chemicals and having an average face velocity of at least 100
feet per minute.
Components with limit values that require monitoring at the
workplace:
Not required.
?? Additional information: No data
?? Personal protective equipment
?? General protective and hygienic measures
Material Safety Data Sheet 4
A15762 ?? 2?Bromo??4,6?difluoroiodobenzene
The usual precautionary measures for handling chemicals should
be followed.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
?? Breathing equipment:
Use suitable respirator when high concentrations are present.
?? Protection of hands:
Impervious gloves
Check protective gloves prior to each use for their proper
condition.
?? Material of gloves
The selection of suitable gloves not only depends on the
material, but also on quality. Quality will vary from
manufacturer to manufacturer.
?? Eye protection: Safety glasses
?? Body protection: Protective work clothing.
?? 9 Physical and chemical properties:
?? General Information
?? Form: Liquid
?? Odor: Not determined
?? Value/Range Unit
Method
?? Change in condition
?? Melting point/Melting range: Not determined
?? Boiling point/Boiling range: 103??104 ?? C
Material Safety Data Sheet 5
A15762 ?? 2?Bromo??4,6?difluoroiodobenzene
15mm Hg
?? Sublimation temperature / start: Not determined
?? Flash point: Not determined
?? Ignition temperature: Not determined
?? Decomposition temperature: Not determined
?? Danger of explosion:
Product does not present an explosion hazard.
?? Explosion limits:
?? Lower: Not determined
?? Upper: Not determined
?? Vapor pressure: Not determined
?? Density: Not determined
?? Solubility in / Miscibility with
?? Water: Not determined
?? 10 Stability and reactivity
?? Thermal decomposition / conditions to be avoided:
Material Safety Data Sheet 6
A15762 ?? 2?Bromo??4,6?difluoroiodobenzene
Decomposition will not occur if used and stored according to
specifications.
?? Materials to be avoided: Oxidizing agents
?? Dangerous reactions No dangerous reactions known
?? Dangerous products of decomposition:
Carbon monoxide and carbon dioxide
Hydrogen fluoride
Hydrogen bromide
Hydrogen iodide (HI)
?? 11 Toxicological information
?? Acute toxicity:
?? Primary irritant effect:
?? on the skin: Irritant to skin and mucous membranes.
?? on the eye: Irritating effect.
?? Sensitization: No sensitizing effects known.
?? Subacute to chronic toxicity:
Other than potential irritation (see above), no information on
illness or injury to humans from acute or chronic exposure to
this product is available.
?? Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this
substance is not fully known.
No classification data on carcinogenic properties of this material is
available from the EPA, IARC, NTP, OSHA or ACGIH.
?? 12 Ecological information:
Material Safety Data Sheet 7
A15762 ?? 2?Bromo??4,6?difluoroiodobenzene
?? General notes:
Do not allow material to be released to the environment without proper
governmental permits.
?? 13 Disposal considerations
?? Product:
?? Recommendation
Consult state, local or national regulations to ensure proper
disposal.
?? Uncleaned packagings:
?? Recommendation:
Disposal must be made according to official regulations.
?? 14 Transport information
Not a hazardous material for transportation.
?? DOT regulations:
?? Hazard class: None
?? Land transport ADR/RID (cross?border)
?? ADR/RID class: None
?? Maritime transport IMDG:
?? IMDG Class: None
Material Safety Data Sheet 8
A15762 ?? 2?Bromo??4,6?difluoroiodobenzene
?? Air transport ICAO?TI and IATA?DGR:
?? ICAO/IATA Class: None
?? Transport/Additional information:
Not dangerous according to the above specifications.
?? 15 Regulations
?? Product related hazard informations:
?? Hazard symbols: Xi Irritant
?? Risk phrases:
36/37/38 Irritating to eyes, respiratory system and skin.
?? Safety phrases:
26 In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
37 Wear suitable gloves.
?? National regulations
This product is not listed in the U.S. Environmental
Protection Agency Toxic Substances Control Act Chemical
Substance Inventory. Use of this product is restricted to
research and development only.
?? Information about limitation of use:
For use only by technically qualified individuals.
Material Safety Data Sheet 9
A15762 ?? 2?Bromo??4,6?difluoroiodobenzene
??
;
Recommended suppliers
China (Mainland)
Assessed Supplier
2-bromo-4,6-difluoroiodobenzene
- Assay:Industrial Grade,
- Appearance:detailed in specifications
- Package:according to the clients requirement
- Storage:Store in dry, dark and ventilated place.
- Transportation:by air or by ocean shipping
- Application:An important raw material and intermediate used in Organic Synthesis, Pharmaceuticals
Contact Supplier
China (Mainland)
Assessed Supplier
2-Bromo-4,6-difluoroiodobenzene
- Assay:97%
- Appearance:Powder or liquid
- Package:According to customer
- Storage:Store in a tightly closed container, in a cool and dry place.
- Transportation:Fedex,DHL,TNT,BY SEA and BY AIR
- Application:Medicinal Chemistry
Biomedicine
Pharmaceutical intermediates
Chemistry experiment
Biological experiments
Chemical reagent
For R&D use only.
Contact Supplier
China (Mainland)
Assessed Supplier
2-Bromo-4,6-difluoroiodobenzene
- Assay:1,d,
- Appearance:As per Certificate of analysis and our TDS, MSDS
- Package:Export standard and according to the clients requirement
- Storage:Store in dry, dark and ventilated place;ISO / Kosher /GMP licence commercial bulk capacity factory in China
- Transportation:By AIR or by SEA GMP licence / US-FDA,South Korea-KFDA
- Application:It is an important raw material and intermediate for chemical industry.
Contact Supplier
China (Mainland)
Assessed Supplier
2-Bromo-4,6-difluoroiodobenzene
- Assay:1,
- Appearance:White powder
- Package:25KGS/Drum
- Storage:Room temperature
- Transportation:BY SEA
- Application:API,Pharmaceutical intermediates
Contact Supplier
China (Mainland)
Assessed Supplier
Pharmaceutical Grade CAS 175278-11-2 with competitive price
- Assay:98%,99%,
- Appearance:White powder
- Package: [Packaging]20mg, 50mg,100mg,1g,10g,100g,according to customers' requirements
- Storage: should be stored in a well-closed container at low temperature, keep away from moisture, heat and light.
- Transportation:1. Samples 1kg-10kg are shipped by international express.
2. 50kg-100kg of goods are transported by dedicated line logistics.
3. Cargo 100kg-1ton is transported by dedicated line logistics.
- Application:Chemical raw materials, pharmaceutical intermediates, cosmetic raw materials, etc.
Contact Supplier