information Related products Suppliers

POLYOXYETHYLENE LAURYL ETHER PHOSPHATE

Zep Manufacturing Co. of Canada
Material Safety Data Sheet
11627 178th Street
Edmonton, Alberta T5S 1N6
1-800-I-BUY-ZEP
and Safe Handling and Disposal Information
Section 1. Chemical Product and Company Identification
Product name PRIME 9862
Product Use Rust Stripper
Product Code 2403
Date of issue Supersedes07/10/03
05/18/06
Emergency For MSDS Information:
Telephone Technical Services Group
Zep Manufacturing of Canada
Numbers
Telephone: (780) 453-8100 (Business Hours 8:00-5:00)

For a Medical or Transportation Emergency:
CANUTEC (24 Hours)
(613) 996-6666 - Call Collect
Prepared by Technical Services Group
Zep Manufacturing Co. of Canada
11627 178th Street
Edmonton, Alberta T5S 1N6
Date of Preparation : 05/18/06
Section 2. Composition, Information on Ingredients
Name of Hazardous Ingredients CAS # % by Weight Toxicity Data
SODIUM HYDROXIDE; caustic soda; soda lye 1310-73-2 30 - 60 LD50 Rat. Oral 240 mg/kg
LD50 Rabbit. Dermal 1350 mg/kg
SODIUM CARBONATE; soda ash; carbonic acid, disodium salt 497-19-8 10 - 30 LD50 Rat. Oral 2800 mg/kg
LC50 Rat. Inhalation 4600 (4 hour
(s))
TRIETHANOLAMINE; TEA 102-71-6 1-5 LD50 Rat. Oral 8680 mg/kg
LD50 Rabbit. Dermal 2000 mg/kg
alpha-DODECYL-omega-HYDROXY-POLY-(OXY-1,2- 39464-66-9 1-5 Not Not Not Not available.
available. available.
ETHANE-DIYL)PHOSPHATE available.

Section 3. Hazards Identification
Acute Effects Routes of EntryInhalation.
Skin Hazardous in case of skin contact (corrosive). The amount of tissue damage depends on length of contact. Skin
contact can produce inflammation and blistering. Skin contact may produce burns.
Eyes Hazardous in case of eye contact (irritant). Corrosive to eyes. Eye contact can result in corneal damage or blindness.
Inhalation Hazardous in case of inhalation (lung corrosive). Inhalation of dust will produce irritation to gastro-intestinal or
respiratory tract, characterized by burning, sneezing and coughing.
Ingestion May be fatal if swallowed. May cause burns to mouth, throat and stomach.
Chronic Effects Repeated exposure of the eyes to a low level of dust can produce eye irritation. Repeated skin
exposure can produce local skin destruction, or dermatitis. Repeated inhalation of dust can produce
varying degree of respiratory irritation or lung damage.
Additional information : See Toxicological Information (section 11)
Section 4. First Aid Measures
Eye Contact Flush with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get
medical attention immediately.
Skin Contact In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing
contaminated clothing and shoes. Get medical attention immediately.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
Inhalation
oxygen. Get medical attention immediately.
Ingestion Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to
an unconscious person. If affected person is conscious, give plenty of water to drink. Get medical
attention immediately.
Section 5. Fire Fighting Measures
Flammable LimitsNot applicable
Flash Point Not applicable
Flammable in presence of oxidizing materials, of acids.
Flammability
Auto-ignition Temperature
Fire-Fighting Procedures Wear special protective clothing and positive pressure, self-contained breathing apparatus.
Fire Hazard Not applicable.
Products of Combustion Carbon Dioxide and toxic/corrosive fumes as oxides of phosphorous
Explosion hazard

Material Safety Data Sheet Product Name PRIME 9862
Product Code 2403

Section 6. Accidental Release Measures
Spill Clean up Put on appropriate personal protective equipment (see Section 8). Use appropriate tools to put the spilled solid in
a convenient waste disposal container. To clean the floor and all objects contaminated by this material, use
detergent. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and
regional authority requirements.
Section 7. Handling and Storage
Handling Do not get in eyes, on skin, or on clothing. Do not breathe dust. Do not ingest. Keep container closed. Use
only with adequate ventilation. Wash thoroughly after handling. Do not mix with or use with other products.
Wash contaminated clothing before reusing.
Storage Contains moisture sensitive material; store in a dry place.Keep container tightly closed and dry. Keep container
in a cool, well-ventilated area. Store between 40??F - 120??F (4.4??C - 49??C). Keep away from incompatibles.
Keep out of the reach of children.
Section 8. Exposure Controls, Personal Protection
Engineering Controls
Personal Protection Protective Clothing (Pictograms)
Eyes Splash goggles. Face shield.
Hands and Body Rubber gloves. Neoprene gloves. Chemical resistant apron.
Chemical resistant boots.
Respiratory Wear appropriate respirator when ventilation is inadequate. Dust respirator.
Exposure Limits
Name of Hazardous Ingredients CAS # Exposure Limits
Sodium Hydroxide 1310-73-2 ACGIH TLV (United States).
CEIL: 2 mg/m3 Form: Dust
OSHA PEL (United States).
TWA: 2 mg/m3 8 hour(s).
Sodium Carbonate 497-19-8 ACGIH (United States).
: 15 mg/m3 Form: Dust
OSHA PEL (United States).
TWA: 15 mg/m3 8 hour(s). Form: Total dust
Triethanolamine 102-71-6 ACGIH TLV (United States).
TWA: 5 mg/m3 8 hour(s).
Consult local authorities for acceptable exposure limits.

Section 9. Physical and Chemical Properties
Physical State Solid. (Free flowing Granular solid.) Color White.
Odor Strong.
pH 13 (Conc. (% w/w): 1) [Basic.]
Vapor Pressure Not applicable
Boiling Point Not applicable
Vapor Density Not applicable
Freezing Point
Evaporation RateNot applicable
Specific Gravity Not applicable
VOC (Consumer) Not applicable
Solubility 1.50 lb/gl
Section 10. Stability and Reactivity
Stability and Reactivity The product is stable.
Incompatibility Reactive with oxidizing agents, acids.
Reactivity Will not occur.
Hazardous Decomposition Products Carbon Dioxide and toxic/corrosive fumes as oxides of phosphorous
Section 11. Toxicological Information
Carcinogenic Effects Ingredients: Not listed as carcinogen by OSHA, NTP or IARC.
Reproductive Effects
Mutagenic Effects
Teratogenic Effects
Section 12. Ecological Information
Ecotoxicity Not available.
Biodegradable/OECD Not available.
Section 13. Disposal Considerations
Waste Stream Code: D002
Waste Information Waste must be disposed according to applicable
Classification: - (Hazardous waste.)
regulations. Consult your local or regional
Origin: - (RCRA waste.)
authorities.

Material Safety Data Sheet Product Name PRIME 9862
Product Code 2403

Section 14. Transport Information
Label
Regulatory UN Proper shipping Class Packing Additional
Information number name Group information

1759 CORROSIVE 8 II
TDG
SOLIDS, N.O.S.
Classification
(Sodium Hydroxide) 8

Limited Quantity: Small quantities of controlled goods are not regulated as Dangerous Goods according to the TDG regulations.
Section 15. Regulatory Information
WHMIS (Canada) Class D-1A: Material causing immediate and serious toxic effects (VERY TOXIC).
Class E: Corrosive solid.
Other Regulations
This product has been classifed according to the hazard criteria of the CPR and the MSDS contains all of the available information required by the CPR.

Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with cautio
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exis

;