information Related products Suppliers

SOLVESSO 100

EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

EVIC 1205 EPOXY THINNE
SYNONYMS

PROPER SHIPPING NAME

PAINT RELATED MATERIAL

PRODUCT USE

A solvent for epoxy paints and varnishes, either as a
diluent or cleaning solvent Used according to manufacturers
directions.

SUPPLIE
Company: Evic Pty Ltd Company: Evic Pty Ltd
Address: Address:
PO Box 306 20 Lancaster Street
Ingleburn Ingleburn
NSW, 2565 NSW, 2565
AUSTRALIA AUSTRALIA
Telephone: (+61 2) 9829 2288
Telephone: 1800 251 633
Fax: 02 9829 1612

HAZARD RATINGS

Flammability:
Toxicity:
Body Contact:
Reactivity:
Chronic:

SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4

Section 2 - HAZARDS IDENTIFICATION

STATEMENT OF HAZARDOUS NATURE

HAZARDOUS SUBSTANCE. DANGEROUS GOODS.

According to the Criteria of NOHSC, and the ADG Code.
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 2 - HAZARDS IDENTIFICATION ...

POISONS SCHEDULE

S5

RISK

Flammable.
Irritating to eyes and respiratory system.
HARMFUL-May cause lung damage if swallowed.
Inhalation, skin contact and/or ingestion may produce health damage*.
Cumulative effects may result following exposure*.
May produce skin discomfort*.
May possibly affect fertility*.
Vapours potentially cause drowsiness and dizziness*.
* (limited evidence)

SAFETY

Keep away from sources of ignition. No smoking.
Keep container in a well ventilated place.
Avoid exposure - obtain special instructions before use.
Do not empty into drains.
To clean the floor and all objects contaminated by this material, use water and
detergent.
Keep container tightly closed.
Keep away from food, drink and animal feeding stuffs.
Take off immediately all contaminated clothing.
In case of contact with eyes, rinse with plenty of water and contact Doctor or
Poisons Information Centre.
If swallowed, IMMEDIATELY contact Doctor or Poisons Information Centre. (show
this container or label).
If you feel unwell contact Doctor or Poisons Information Centre. (Show the label
if possible).

Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS

NAME CAS RN %
aromatic hydrocarbons 63231-51-6 >60
propylene glycol monomethyl ether 107-98-2 10-30

Section 4 - FIRST AID MEASURES

SWALLOWE If spontaneous vomiting appears imminent or occurs, hold patient's head down,
lower than their hips to help avoid possible aspiration of vomitus.
If swallowed do NOT induce vomiting.
If vomiting occurs, lean patient forward or place on left side (head-down
position, if possible) to maintain open airway and prevent aspiration.
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 4 - FIRST AID MEASURES ...

Observe the patient carefully.
Never give liquid to a person showing signs of being sleepy or with reduced
awareness; i.e. becoming unconscious.
Give water to rinse out mouth, then provide liquid slowly and as much as
casualty can comfortably drink.
Seek medical advice.
Avoid giving milk or oils.
Avoid giving alcohol.

EYE
If this product comes in contact with the eyes:
Wash out immediately with fresh running water.
Ensure complete irrigation of the eye by keeping eyelids apart and away from
eye and moving the eyelids by occasionally lifting the upper and lower lids.
If pain persists or recurs seek medical attention.
Removal of contact lenses after an eye injury should only be undertaken by
skilled personnel.

SKIN
If skin contact occurs:
Immediately remove all contaminated clothing, including footwear
Flush skin and hair with running water (and soap if available).
Seek medical attention in event of irritation.

INHALE If fumes or combustion products are inhaled remove from contaminated area.
Lay patient down. Keep warm and rested.
Prostheses such as false teeth, which may block airway, should be removed,
where possible, prior to initiating first aid procedures.
Apply artificial respiration if not breathing, preferably with a demand valve
resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if
necessary.
Transport to hospital, or doctor.

NOTES TO PHYSICIAN
Treat symptomatically.
Any material aspirated during vomiting may produce lung injury. Therefore emesis
should not be induced mechanically or pharmacologically. Mechanical means should
be used if it is considered necessary to evacuate the stomach contents; these
include gastric lavage after endotracheal intubation. If spontaneous vomiting
has occurred after ingestion, the patient should be monitored for difficult
breathing, as adverse effects of aspiration into the lungs may be delayed up to
48 hours.
For acute or short term repeated exposures to petroleum distillates or related
hydrocarbons:
Primary threat to life, from pure petroleum distillate ingestion and/or
inhalation, is respiratory failure.
Patients should be quickly evaluated for signs of respiratory distress (e.g.
cyanosis, tachypnoea, intercostal retraction, obtundation) and given oxygen.
Patients with inadequate tidal volumes or poor arterial blood gases (pO2 50 mm
Hg) should be intubated.
Arrhythmias complicate some hydrocarbon ingestion and/or inhalation and
electrocardiographic evidence of myocardial injury has been reported;
intravenous lines and cardiac monitors should be established in obviously
symptomatic patients. The lungs excrete inhaled solvents, so that
hyperventilation improves clearance.
A chest x-ray should be taken immediately after stabilisation of breathing and
circulation to document aspiration and detect the presence of pneumothorax.
Epinephrine (adrenalin) is not recommended for treatment of bronchospasm
because of potential myocardial sensitisation to catecholamines. Inhaled
cardioselective bronchodilators (e.g. Alupent, Salbutamol) are the preferred
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 4 - FIRST AID MEASURES ...

agents, with aminophylline a second choice.
Lavage is indicated in patients who require decontamination; ensure use of
cuffed endotracheal tube in adult patients. [Ellenhorn and Barceloux: Medical
Toxicology]

Section 5 - FIRE FIGHTING MEASURES

EXTINGUISHING MEDIA
Foam.
Dry chemical powder.
BCF (where regulations permit).
Carbon dioxide.
Water spray or fog - Large fires only.

FIRE FIGHTING
Alert Fire Brigade and tell them location and nature of hazard.
May be violently or explosively reactive.
Wear breathing apparatus plus protective gloves.
Prevent, by any means available, spillage from entering drains or water
course.
If safe, switch off electrical equipment until vapour fire hazard removed.
Use water delivered as a fine spray to control fire and cool adjacent area.
Avoid spraying water onto liquid pools.
DO NOT approach containers suspected to be hot.
Cool fire exposed containers with water spray from a protected location.
If safe to do so, remove containers from path of fire.

FIRE/EXPLOSION HAZAR Liquid and vapour are flammable.
Moderate fire hazard when exposed to heat or flame.
Vapour forms an explosive mixture with air.
Moderate explosion hazard when exposed to heat or flame.
Vapour may travel a considerable distance to source of ignition.
Heating may cause expansion or decomposition leading to violent rupture of
containers.
On combustion, may emit toxic fumes of carbon monoxide (CO).
Combustion products include
carbon dioxide (CO2)
other pyrolysis products typical of burning organic material

FIRE INCOMPATIBILITY
Avoid contamination with oxidising agents i.e. nitrates, oxidising acids,
chlorine bleaches, pool chlorine etc. as ignition may result

HAZCHEM

3[Y]

Personal Protective Equipment

Glasses:
Safety Glasses.
Chemical goggles.

Gloves:
1.BUTYL 2.NEOPRENE 3.PVC

Respirator:
Type A Filter of sufficient capacity
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 5 - FIRE FIGHTING MEASURES ...

Section 6 - ACCIDENTAL RELEASE MEASURES

EMERGENCY PROCEDURES

MINOR SPILLS
Remove all ignition sources.
Clean up all spills immediately.
Avoid breathing vapours and contact with skin and eyes.
Control personal contact by using protective equipment.
Contain and absorb small quantities with vermiculite or other absorbent
material.
Wipe up.
Collect residues in a flammable waste container.

MAJOR SPILLS
Clear area of personnel and move upwind.
Alert Fire Brigade and tell them location and nature of hazard.
May be violently or explosively reactive.
Wear breathing apparatus plus protective gloves.
Prevent, by any means available, spillage from entering drains or water
course.
No smoking, naked lights or ignition sources.
Increase ventilation.
Stop leak if safe to do so.
Water spray or fog may be used to disperse / absorb vapour.
Contain spill with sand, earth or vermiculite.
Use only spark-free shovels and explosion proof equipment.
Collect recoverable product into labelled containers for recycling.
Absorb remaining product with sand, earth or vermiculite.
Collect solid residues and seal in labelled drums for disposal.
Wash area and prevent runoff into drains.
If contamination of drains or waterways occurs, advise emergency services.

PROTECTIVE ACTIONS FOR SPILL

PROTECTIVE ACTION ZONE

half
evacuation
downwind
direction
distance
wind down wind distance
isolation
distance
direction
half
evacuation downwind
INITIAL direction distance
ISOLATION
ZONE

From IERG (Canada/Australia)
Isolation Distance 25 metres
Downwind Protection Distance 300 metres
IERG Number 14

FOOTNOTES
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 6 - ACCIDENTAL RELEASE MEASURES ...

1 PROTECTIVE ACTION ZONE is defined as the area in which people are at risk
of harmful exposure. This zone assumes that random changes in wind direction
confines the vapour plume to an area within 30 degrees on either side of the
predominant wind direction, resulting in a crosswind protective action distance
equal to the downwind protective action distance.
2 PROTECTIVE ACTIONS should be initiated to the extent possible, beginning with
those closest to the spill and working away from the site in the downwind
direction. Within the protective action zone a level of vapour concentration
may exist resulting in nearly all unprotected persons becoming incapacitated
and unable to take protective action and/or incurring serious or irreversible
health effects.
3 INITIAL ISOLATION ZONE is determined as an area, including upwind of the
incident, within which a high probability of localised wind reversal may
expose nearly all persons without appropriate protection to life-threatening
concentrations of the material.
4 SMALL SPILLS involve a leaking package of 200 litres (55 US gallons) or less,
such as a drum (jerrican or box with inner containers). Larger packages leaking
less than 200 litres and compressed gas leaking from a small cylinder are also
considered "small spills".
LARGE SPILLS involve many small leaking packages or a leaking package of
greater than 200 litres, such as a cargo tank, portable tank or a "one-tonne"
compressed gas cylinder.
5 Guide 128 is taken from the US DOT emergency response guide book.
6 IERG information is derived from CANUTEC - Transport Canada.

Personal Protective Equipment advice is contained in Section 8 of the MSDS.

Section 7 - HANDLING AND STORAGE

PROCEDURE FOR HANDLING

Avoid all personal contact, including inhalation.
Wear protective clothing when risk of overexposure occurs.
Use in a well-ventilated area.
Prevent concentration in hollows and sumps.
DO NOT enter confined spaces until atmosphere has been checked.
Avoid smoking, naked lights or ignition sources.
Avoid generation of static electricity.
DO NOT use plastic buckets.
Earth all lines and equipment.
Use spark-free tools when handling.
Avoid contact with incompatible materials.
When handling, DO NOT eat, drink or smoke.
Keep containers securely sealed when not in use.
Avoid physical damage to containers.
Always wash hands with soap and water after handling.
Work clothes should be laundered separately.
Use good occupational work practice.
Observe manufacturer's storing and handling recommendations.
Atmosphere should be regularly checked against established exposure standards
to ensure safe working conditions.
DO NOT allow clothing wet with material to stay in contact with skin

SUITABLE CONTAINE Packing as supplied by manufacturer. Plastic containers may only be used if
approved for flammable liquid. Check that containers are clearly labelled and
free from leaks.
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 7 - HANDLING AND STORAGE ...

For low viscosity materials (i) : Drums and jerry cans must be of the
non-removable head type. (ii) : Where a can is to be used as an inner package,
the can must have a screwed enclosure.
For materials with a viscosity of at least 2680 cSt. (23 deg. C)
For manufactured product having a viscosity of at least 250 cSt. (23 deg. C)
Manufactured product that requires stirring before use and having a viscosity
of at least 20 cSt (25 deg. C)
(i) : Removable head packaging;
(ii) : Cans with friction closures and
(iii) : low pressure tubes and cartridges may be used.
Where combination packages are used, and the inner packages are of glass,
there must be sufficient inert cushioning material in contact with inner and
outer packages
In addition, where inner packagings are glass and contain liquids of packing
group I there must be sufficient inert absorbent to absorb any spillage, unless
the outer packaging is a close fitting moulded plastic box and the substances
are not incompatible with the plastic.

STORAGE INCOMPATIBILITY
Avoid reaction with oxidising agents

STORAGE REQUIREMENTS
Store in original containers in approved flammable liquid storage area.
DO NOT store in pits, depressions, basements or areas where vapours may be
trapped.
No smoking, naked lights, heat or ignition sources.
Keep containers securely sealed.
Store away from incompatible materials in a cool, dry, well-ventilated area.
Protect containers against physical damage and check regularly for leaks.
Observe manufacturer's storing and handling recommendations.

Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

EXPOSURE CONTROLS

No data for Evic 1205 Epoxy Thinner.

INGREDIENT DATA

AROMATIC HYDROCARBONS:
Insufficiently classified, hence a "worst case value" is assumed, viz
CEL TWA: 50 ppm, 150 mg/m3 as total hydrocarbons
for petroleum distillates:
CEL TWA: 500 ppm, 2000 mg/m3 (compare OSHA TWA)

PROPYLENE GLYCOL MONOMETHYL ETHER:
TLV TWA: 100 ppm [ACGIH]
TLV STEL: 150 ppm [ACGIH]
TLV TWA: 100 ppm, 369 mg/m3; STEL: 150 ppm, 553 mg/m3
ES TWA: 100 ppm, 369 mg/m3; STEL: 150 ppm, 553 mg/m3 Under review
OES TWA: 100 ppm, 375 mg/m3; STEL: 300 ppm, 1120 mg/m3 (skin)
Exposure limits with "skin" notation indicate that vapour and liquid may be
absorbed through intact skin. Absorption by skin may readily exceed vapour
inhalation exposure. Symptoms for skin absorption are the same as for
inhalation. Contact with eyes and mucous membranes may also contribute to
overall exposure and may also invalidate the exposure standard.
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION ...

MAK value: 100 ppm, 370 mg/m3
MAK Category I Peak Limitation: For local irritants Allows excursions of twice
the MAK value for 5 minutes at a time, 8 times per shift.
MAK Group C: There is no reason to fear risk of damage to the developing embryo
when MAK and BAT values are observed.
MAK values, and categories and groups are those recommended within the
Federal Republic of Germany
Odour Threshold: 10 ppm.
The TLV-TWA is protective against discomfort caused by odour, against
eye and skin irritation, and chronic effects (including possible liver
and kidney damage).
Individuals exposed to 100 ppm reported a transient unpleasant odour with
slight eye irritation after about 1 or 2 hours. At 300 ppm, mild
irritation of the eyes and nose developed within 5 minutes; some
individuals found the irritation hardly bearable after about an hour. A
concentration of 750 ppm was highly irritating. Signs of central nervous
system depression developed at 1000 ppm. Neurological, clinical chemical
and general medical examinations showed no other conspicuous toxicity.
Concentrations of the beta-isomer, 2-methoxy-1-propyl acetate are low in
commercial grades of PGME and teratogenic effects associated with this
isomer are expected to be absent.

PERSONAL PROTECTION

EYE
Safety glasses with side shields.
Chemical goggles.
Contact lenses pose a special hazard; soft lenses may absorb irritants and all
lenses concentrate them. DO NOT wear contact lenses.

HANDS/FEET
Wear chemical protective gloves, eg. PVC.
Wear safety footwear or safety gumboots, eg. Rubber

OTHE Overalls.
PVC Apron.
PVC protective suit may be required if exposure severe.
Eyewash unit.
Ensure there is ready access to a safety shower.

ENGINEERING CONTROLS

For flammable liquids and flammable gases, local exhaust ventilation or a
process enclosure ventilation system may be required. Ventilation equipment
should be explosion-resistant.
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE

Clear colourless flammable liquid with a solvent odour; does not mix with water.

PHYSICAL PROPERTIES

Liquid.
Does not mix with water.
Floats on water.

Molecular Weight: Not Available Boiling Range (??C): 118-170
Melting Range (??C): Not Available Specific Gravity (water=1): 0.85-0.90
Solubility in water (g/L): Immiscible pH (as supplied): Not Available
pH (1% solution): Not Available Vapour Pressure (kPa): Not Available
Volatile Component (%vol): 100 Evaporation Rate: Not Available
Relative Vapour Density (air=1): >1 Flash Point (??C): 32
Lower Explosive Limit (%): Not Available Upper Explosive Limit (%): Not Available
Autoignition Temp (??C): Not Available Decomposition Temp (??C): Not Available
State: Liquid

Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION

CONDITIONS CONTRIBUTING TO INSTABILITY

Presence of incompatible materials.
Product is considered stable.
Hazardous polymerisation will not occur.

Section 11 - TOXICOLOGICAL INFORMATION

POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS
SWALLOWE Swallowing of the liquid may cause aspiration into the lungs with the risk of
chemical pneumonitis; serious consequences may result. (ICSC13733)
Constant or exposure over long periods to mixed hydrocarbons may produce stupor
with dizziness, weakness and visual disturbance, weight loss and anaemia, and
reduced liver and kidney function. Skin exposure may result in drying and
cracking and redness of the skin. Chronic exposure to lighter hydrocarbons can
cause nerve damage, peripheral neuropathy, bone marrow dysfunction and
psychiatric disorders as well as damage the liver and kidneys.
Considered an unlikely route of entry in commercial/industrial environments. The
liquid may produce gastrointestinal discomfort and may be harmful if swallowed.
Ingestion may result in nausea, pain and vomiting. Vomit entering the lungs by
aspiration may cause potentially lethal chemical pneumonitis.
Ingestion of petroleum hydrocarbons can irritate the pharynx, oesophagus,
stomach and small intestine, and cause swellings and ulcers of the mucous.
Symptoms include a burning mouth and throat; larger amounts can cause nausea and
vomiting, narcosis, weakness, dizziness, slow and shallow breathing, abdominal
swelling, unconsciousness and convulsions. Damage to the heart muscle can
produce heart beat irregularities, ventricular fibrillation (fatal) and ECG
changes. The central nervous system can be depressed. Light species can cause a
sharp tingling of the tongue and cause loss of sensation there. Aspiration can
cause cough, gagging, pneumonia with swelling and bleeding.
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 11 - TOXICOLOGICAL INFORMATION ...

EYE
This material can cause eye irritation and damage in some persons.
Direct eye contact with petroleum hydrocarbons can be painful, and the corneal
epithelium may be temporarily damaged. Aromatic species can cause irritation and
excessive tear secretion.
The material may be irritating to the eye, with prolonged contact causing
inflammation. Repeated or prolonged exposure to irritants may produce
conjunctivitis.

SKIN
Entry into the blood-stream, through, for example, cuts, abrasions or lesions,
may produce systemic injury with harmful effects. Examine the skin prior to the
use of the material and ensure that any external damage is suitably protected.
Absorption by skin may readily exceed vapour inhalation exposure. Symptoms for
skin absorption are the same as for inhalation.
Aromatic hydrocarbons may produce sensitivity and redness of the skin. They are
not likely to be absorbed into the body through the skin but branched species
are more likely to.
The material may cause skin irritation after prolonged or repeated exposure and
may produce on contact skin redness, swelling, the production of vesicles,
scaling and thickening of the skin.

INHALE The material may produce respiratory tract irritation, and result in damage to
the lung including reduced lung function.
Inhalation of vapours may cause drowsiness and dizziness. This may be
accompanied by narcosis, drowsiness, reduced alertness, loss of reflexes, lack
of coordination and vertigo.
If exposure to highly concentrated solvent atmosphere is prolonged this may lead
to narcosis, unconsciousness, even coma and possible death.
Acute effects from inhalation of high vapour concentrations may be chest and
nasal irritation with coughing, sneezing, headache and even nausea.
Inhaling high concentrations of mixed hydrocarbons can cause narcosis, with
nausea, vomiting and lightheadedness. Low molecular weight (C2-C12) hydrocarbons
can irritate mucous membranes and cause incoordination, giddiness, nausea,
vertigo, confusion, headache, appetite loss, drowsiness, tremors and stupor.
Massive exposures can lead to severe central nervous system depression, deep
coma and death. Convulsions can occur due to brain irritation and/or lack of
oxygen. Permanent scarring may occur, with epileptic seizures and brain bleeds
occurring months after exposure. Respiratory system effects include inflammation
of the lungs with oedema and bleeding. Lighter species mainly cause kidney and
nerve damage; the heavier paraffins and olefins are especially irritant to the
respiratory system. Alkenes produce pulmonary oedema at high concentrations.
Liquid paraffins may produce sensation loss and depressant actions leading to
weakness, dizziness, slow and shallow respiration, unconsciousness, convulsions
and death. C5-7 paraffins may also produce multiple nerve damage. Aromatic
hydrocarbons accumulate in lipid rich tissues (typically the brain, spinal cord
and peripheral nerves) and may produce functional impairment manifested by
nonspecific symptoms such as nausea, weakness, fatigue, vertigo; severe
exposures may produce inebriation or unconsciousness. Many of the petroleum
hydrocarbons can sensitise the heart and may cause ventricular fibrillation,
leading to death.

CHRONIC HEALTH EFFECTS
Substance accumulation, in the human body, may occur and may cause some concern
following repeated or long-term occupational exposure.
Chronic solvent inhalation exposures may result in nervous system impairment and
liver and blood changes. [PATTYS]
Constant or exposure over long periods to mixed hydrocarbons may produce stupor
with dizziness, weakness and visual disturbance, weight loss and anaemia, and
reduced liver and kidney function. Skin exposure may result in drying and
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 11 - TOXICOLOGICAL INFORMATION ...

cracking and redness of the skin. Chronic exposure to lighter hydrocarbons can
cause nerve damage, peripheral neuropathy, bone marrow dysfunction and
psychiatric disorders as well as damage the liver and kidneys.

Section 12 - ECOLOGICAL INFORMATION

Drinking Water Standards:
hydrocarbon total: 10 ug/l (UK max.).
DO NOT discharge into sewer or waterways.

Section 13 - DISPOSAL CONSIDERATIONS

Consult manufacturer for recycling options and recycle where possible .
Consult State Land Waste Management Authority for disposal.
Incinerate residue at an approved site.
Recycle containers if possible, or dispose of in an authorised landfill.
Puncture containers to prevent re-use and bury at an authorised landfill.

Section 14 - TRANSPORTATION INFORMATION

Shipping Name:
PAINT RELATED MATERIAL
Dangerous Goods Class: 3
UN/NA Number: 1263
ADR Number: 30
Packing Group: III
Labels Required: flammable liquid
Additional Shipping Information:
International Transport Regulations:
IMO: 3

HAZCHEM

3[Y]

Section 15 - REGULATORY INFORMATION

POISONS SCHEDULE

S5
EVIC 1205 EPOXY THINNE ChemWatch Material Safety Data Sheet CHEMWATCH 5095-40
Issue Date: Tue 9-Dec-2003 CD 2004/2
Section 16 - OTHER INFORMATION

This document is copyright. Apart from any fair dealing for the purposes of
private study, research, review or criticism, as permitted under the Copyright
Act, no part may be reproduced by any process without written permission from
CHEMWATCH. TEL (+61 3) 9572 4700.

Issue Date: Tue 9-Dec-2003
Print Date: Tue 25-May-2004

;