information Related products Suppliers

Paraffins (petroleum),normal C5-20

EG-Sicherheitsdatenblatt gem?? 91/155/EWG
MATERIAL SAFETY DATA SHEET
MSDS # 08 820C, 834, 837, 840, 841, 885-WHT, 924-12CT
REVISED DATE: 05-05-2004
PRODUCT NAME: Crystalyte?Liquid Wax, Tuxedo-Dispos-A-Lamp??

SECTION 1 - IDENTIFICATION AND EMERGENCY INFORMATION

HAZARDOUS MATERIALS IDENTIFICATION SYSTEM (HMIS): ACUTE HEALTH FIRE REACTIVITY
BASIS: Recommended by Manufacturer 1 1 0

PRODUCT NAME: Crystalyte?Liquid Wax, Tuxedo-Dispos-A-Lamp??
UPC/SKU #: 820C, 820D, 820FSA, 820M, 820S, 834, 834D, 834FSA, 834S, 837, 837FSA, 837RD, 837S, 840, 840C, 840D, 840FSA, 840RD,
840S, 885-WHT, 924-12CT
Discontinued: 836, 836AL, 836RD, 836S, 840AL, 870D, 924-12AUS, 975-L as of March 29, 2004
PRODUCT DESCRIPTION: Disposable Liquid Wax Cartridge; Burn Times: 18 hr., 30 hr., 36 hr., 45 hr., 110 hr.
PRODUCT CATEGORY: Petroleum Solvent
PRODUCT APPEARANCE AND ODOR: Clear water-white liquid, essentially odorless
CAS NUMBER: 64771-72-8
GENERAL USE: Used in lamps, is a smokeless, clean burning disposable liquid wax cartridge.

The STERNO GROUP
Division of Candle Corporation of America
999 E Touhy, Suite 500
Des Plaines, IL USA 60018

DOMESTIC: For consumer information: Call toll free: 1-(888) 4-LITES-1

EMERGENCY TELEPHONE NUMBER: For emergencies involving spill, leak, fire, exposure or accident, call CHEMTREC: 1-(800) 424-9300,
day or night.

THE PITTSBURGH POISON CENTER HAS BEEN PROVIDED SPECIFIC INFORMATION FOR USE IN MEDICAL EMERGENCIES
INVOLVING THESE PRODUCTS. IN THE USA, CANADA & MEXICO, CALL TOLL FREE: 1-(888) 313-8954.

INTERNATIONAL: ALL EMERGENCIES, Involving spill, leak, fire, exposure or accident, CALL 1-(703) 527-3887
ALL MEDICAL EMERGENCIES, call your local Poison Control Center.

SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS

COMPONENTS CAS NO. OF COMPONENTS APPROXIMATE
Paraffin??s (petroleum), normal C5-20 64771-72-8 100%

EINECS number: 265-233-4 EU classification: Xn; R65

This product, as manufactured, does not contain polychlorinated biphenyl??s (PCB??s).

SECTION 3 - HAZARDS INDENTIFICATION

Under normal conditions of use this product is not considered hazardous according to regulatory guidelines.
Product is clear, colorless liquid. Exposure to fire can generate toxic fumes.
PRECAUTIONARY LABELING: Label on bottom of 924-12CT bottles. Never leave burning cartridge unattended. Keep from children etc??
EYE CONTACT: Eye irritant upon direct contact.
SKIN CONTACT: May cause skin irritation or dermatitis upon prolonged contact.
INGESTION: Low viscosity material ?? if swallowed may enter the lungs and cause lung damage.
INHALATION: May cause headaches, dizziness, anesthesia, drowsiness, unconsciousness, and other CNS effects, including death.

SECTION 4 - FIRST AID MEASURES

EYE CONTACT: If splashed into the eyes. Remove contact lenses, then flush with clear water for 15 minutes or until irritation subsides. If irritation
persists, call for medical attention.
SKIN CONTACT: In case of skin contact, remove any contaminated clothing and wash skin with soap and water. Launder or dry clean clothing
before reuse. If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound
or its size, the individual should be evaluated immediately by a physician as a surgical emergency. Even though initial symptoms
from high-pressure injection may be minimal or absent, early surgical treatment within the first few hours may significantly reduce
the ultimate extent of injury.
INHALATION: If overcome by vapor, respiratory irritation, dizziness, nausea, or unconsciousness occurs remove from exposure and call a physician
immediately. If breathing is irregular or has stopped, start resuscitation, administer oxygen, if available.
INGESTION: DO NOT INDUCE VOMITING; call a physician immediately.
C:\to_pdf\MSDS 08 820C, 834, 837, 840, 841, 885-WHT, 924-12CT.doc NOTE TO PHYSICIANS: If material is aspirated into the lungs it may cause chemical pneumonitis. Pre-existing medical conditions, which may be
aggravated by exposure Petroleum Solvents / Petroleum Hydrocarbons - Skin contact may aggravate an existing dermatitis.

SECTION 5 - FIRE FIGHTING MEASURES

COMBUSTION PRODUCTS: Carbon monoxide, Carbon dioxide, water.
FLASH POINT: (Minimum) 116oC (240oF) ASTM D 93, Pensky Martens Closed Cup
FLAMMABLE LIMITS OR EXPLOSIVE LIMITS: (approx. % vol. in air) ?? LEL: 1.3%, UEL: 8.7%

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)-HAZARD IDENTIFICATION
Health Flammability Reactivity BASIS:
1 1 0 Recommended by Manufacturer

EXTINGUISHING MEDIA AND FIRE FIGHTING PROCEDURES: Foam, water spray (fog), dry chemical, carbon dioxide and vaporizing liquid
type extinguishing agents may all be suitable for extinguishing fires involving
this type of product, depending on size or potential size of fire and
circumstances related to the situation. Plan fire protection and response
strategy through consultation with local fire protection authorities or
appropriate specialists.
SPECIAL FIRE FIGHTING PROCEDURES: Use water spray, dry chemical, foam or carbon dioxide to extinguish the fire. Use water to keep fire-
exposed containers cool. If a leak or spill has not ignited, use water spray to disperse the vapors and to
provide protection for persons attempting to stop a leak. Water spray may be used to flush spills away
from exposures. Minimize breathing of gases, vapor, fumes or decomposition products.
SPECIAL PROTECTIVE EQUIPMENT: For fires in confined spaces or enclosed areas, fire fighters must use self-contained breathing apparatus.
UNSUAL FIRE AND EXPLOSION HAZARDS: Exposure to fire can generate toxic fumes.
DECOMPOSITION PRODUCTS UNDER FIRE CONDITIONS: Fumes, smoke, carbon monoxide, aldehydes and other decomposition products, in
the case of incomplete combustion.
WORK PRACTICES / ENGINEERING CONTROLS: To prevent fire or explosion risk from static accumulation and discharge, effectively bond
and/or ground product transfer system in accordance with (THE) National Fire Protection
Association PUBLICATIONS.

SECTION 6 - ACCIDENTAL RELEASE MEASURES

NOTIFICATION PROCEDURES: Report Spills or releases to appropriate authorities. Spills or releases that could reach any waterway including
intermittent dry creeks require immediate reporting to the U.S. Coast Guard and EPA.
RELEASE OR SPILL OF MATERIAL: Spill: Remove all sources of ignition. Contain spill with suitable absorbent material.
DISPOSAL: See section 13 for disposal method.
Material should be prevented from entering sewers, low-lying areas or other water sources. Advise appropriate authorities if it has spilled or it
contaminates soil or vegetation.

SECTION 7 - HANDLING AND STORAGE

HANDLING PRECAUTIONS: This liquid is volatile and gives off invisible vapors. Either the liquid or vapor may settle in low areas or travel some
distance along the ground or surface to ignition sources where they may ignite or explode. Keep product away from
ignition sources, such as heat, sparks, pilot lights, static electricity, and open flames. Keep product away from strong
oxidants. Use product in a well ventilated area.
STORAGE: Store in cool dry place above 46oF (7.8oC) to keep from freezing. If product freezes warm to >46oF before usage. Recommended
storage temperature range is 46oF (7.8oC) to 100oF (38oC). Ideal storage temperature is 77oF (25oC). Store away from direct
sunlight.
SPECIAL PRECAUTIONS: Do not use electronic devises (including but not limited to cellular phones, computers, calculators, pagers, etc.) in or
around any fueling operation or storage area unless the devices are certified ??EMPTY?? CONTAINER WARNING:
??Empty?? containers retain residue (liquid and/or vapor) and can be dangerous. DO NOT PRESSURIZE, CUT, WELD,
BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC
ELECTRICITY, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY O DEATH. Do not attempt to refill or clean containers since residue is difficult to remove. ??Empty?? drums should be
completely drained, properly bunged and promptly returned to a drum reconditioner. All other containers should be
disposed of in an environmentally safe manner and in accordance with governmental regulations.

SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION

EXPOSURE LIMIT FOR TOTAL PRODUCT: an 8-hour time-weighted average (TWA)of 1200 mg/m3) BASIS: Recommended by Manufacturer
VENTILATION: Use with ventilation sufficient to prevent exceeding recommended exposure limit or buildup of explosive concentrations of vapor in
air. No smoking, or use of flame or other ignition sources.
RESPIRATORY PROTECTION: Use supplied-air respiratory protection in confined or enclosed spaces, if needed.
SKIN PROTECTION: Use chemical-resistant gloves, if needed, to avoid prolonged or repeated skin contact.
C:\to_pdf\MSDS 08 820C, 834, 837, 840, 841, 885-WHT, 924-12CT.doc EYE PROTECTION: Use Chemical type splash goggles or face shield when eye contact may occur.
OTHER PROTECTIVE EQUIPMENT: Use chemical-resistant apron or other impervious clothing, if needed, to avoid contaminating regular clothing,
which could result in prolonged or repeated skin contact.
PERSONAL HYGIENE: Minimize breathing vapor or mist. Avoid prolonged or repeated contact with skin. Remove contaminated clothing; launder
or dry-clean before re-use. Remove contaminated shoes and thoroughly clean and dry before re-use. Cleanse skin
thoroughly after contact, before breaks and meals, and at end of work period. Product is readily removed from skin by
waterless hand cleaners followed by washing thoroughly with soap and water.

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

The following data are approximate or typical values and should not be used for precise design purposes.
APPEARANCE: Liquid VAPOR PRESSURE: mmHg @ 20oC < 0.1
COLOR: Clear, Colorless BOILING RANGE: 249oC (480oF)
ODOR: Mild Hydrocarbon SPECIFIC GRAVITY(15.6oC /15.6oC): 0.773 (6.44 lb/gal)
VAPOR DENSITY (Air = 1): 7.3 EVAPORATION RATE: (1=n-butyl acetate) : < 0.1
RELATIVE DENSITY: 15/4 C: 0.77 MOLECULAR WEIGHT: 212
POUR POINT C(F): -9(16) FREEZING POINT: 45oF (7.2oC) VS. Congealing Point
pH: Essentially neutral SOLUBILITY IN WATER @ 1 atm. and 25oC (77oF): Negligible; 0.0001%
VISCOSITY: 2.53 cSt @ 25oC (77oF) ASTM D 445
PERCENT VOLATILE BY VOLUME: Less than 25% in 1,920 minutes @ 1 atm. and 25oC (77oF)

SECTION 10 - STABILITY AND REACTIVITY

STABILITY: Stable.
CONDITIONS TO AVOID: Extreme heat and high-energy sources of ignition.
INCOMPATIBILITY: Strong oxidizers. (liquid chlorine, concentrated oxygen, sodium hypochlorite, calcium hypochlorite, etc., as this presents a
serious explosion hazard)
HAZARDOUS DECOMPOSITION PRODUCTS: Product does not decompose at ambient temperatures.
HAZARDOUS POLYMERIZATION: Will not occur.

SECTION 11 - TOXICOLOGICAL INFORMATION

ACUTE TOXICOLOGY
ORAL TOXICITY: Not established
DERMAL TOXICITY: Not established
INHALATION TOXICITY: Not established
EYE IRRITATION: Not established
SKIN IRRITATION: Not established
CHRONIC TOXICOLOGY: Prolonged repeated skin contact may cause skin irritation and/or dermatitis.
NATURE OF HAZARD AND TOXICITY INFORMATION: Prolonged or repeated skin contact with this product tends to remove skin oils, possibly
leading to irritation and dermatitis; however, based on human experience and available
toxicological data, this product is judged to be neither a ??corrosive?? nor an ??irritant??
by OSHA criteria.
TOXIC CHEMICAL RELEASE REPORTING, EPA REGULATION 40 CFR 372 (SARA Section 313)
No toxic chemical is present greater than 1% or 0.1% (carcinogen).

SECTION 12 - ECOLOGICAL INFORMATION

ENVIRONMENTAL EFFECTS: Not established.

SECTION 13 - DISPOSAL CONSIDERATIONS

WASTE DISPOSAL: Product is suitable for burning for fuel value in compliance with applicable laws and regulations and consideration of product
characteristics at time of disposal.
RCRA INFORMATION: The unused product is not specifically listed by the EPA as a hazardous waste (40 CFR, Part 261D). It does not exhibit the
hazardous characteristics of ignitability, Corrosivity, or reactivity. The unused product is not formulated with substances
covered by the Toxicity Characteristic Leaching Procedure (TCLP). However, used product may be regulated.

SECTION 14 - TRANSPORTATION AND OSHA RELATED LABEL INFORMATION

U.S. DOT: NOT REGULATED BY USA DOT; DOT ERG No.: NA
IMO: NOT REGULATED BY IMO.
IATA: NOT REGULATED BY IATA.
STATIC ACCUMULATOR (50 picosiemens or less): Yes
C:\to_pdf\MSDS 08 820C, 834, 837, 840, 841, 885-WHT, 924-12CT.doc SECTION 15 - REGULATORY INFORMATION

CLEAN WATER ACT / OIL POLLUTION ACT: This product may be classified as an oil under Section 311 of the Clean Water Act, and under the
Oil Pollution Act. Discharges or spills into or leading to surface waters that cause a sheen must
be reported to the National Response Center (1-800-424-8802).
The following information may be useful in complying with various state and federal laws and regulations under various environmental statutes:
US OSHA HAZARD COMMUNICATION STANDARD: Product assessed in accordance with OSHA 29 CFR 1910.1200 and determined no to be
hazardous.
All components comply with TSCA.
U.S. Superfund Amendments and Reauthorization Act (SARA) Title III: This product contains no ??EXTREMELY HAZARDOUS SUBSTANCES??.
THRESHOLD PLANNING QUANTITY (TPQ), EPA REGULATION 40 CFR 355 (SARA Sections 301-304): No TPQ for product or any constituent
greater than 1% or 0.1% (carcinogen).
HAZARDOUS CHEMICAL REPORTING, EPA REGULATION 40 CFR 370 (SARA Sections 311-312) EPA Hazard Classification Code:
Not applicable.
OSHA REQUIRED LABEL INFORMATION: In compliance with hazard and right-to-know requirements, where applicable OSHA Hazard Warnings
may be found on the label, bill of lading or invoice accompanying this shipment.
SYMBOL: Not classified
NOTE: Product label may contain non-OSHA related information also.

PRODUCT LABELING INFORMATION:
SYMBOL: Xn
RISK PHRASES: Harmful: May cause lung damage if swallowed.
SAFETY PHRASES: Keep out of the reach of children. Do not breathe vapors. Avoid contact with skin. If swallowed, do not induce vomiting;
seek medical advice immediately and show this label.

SECTION 16 - OTHER INFORMATION

Risk Phrases in Section 2: R65: Harmful: may cause lung damage if swallowed.

Information on electrical equipment appropriate for use with this product may be found in the latest edition of the National Electrical Code (NFPA-70).
This document is available from the National Fire Protection Association, Batterymarch Park, Quincy, and Massachusetts 02269.

The information on this sheet is limited to the material identified and is believed by the Candle Corporation of America to be correct based on its
knowledge and information as of the date noted. Candle Corporation of America makes no representation, guarantee or warrantee, expressed or implied,
as to the accuracy, reliability or completeness of the information and assumes no responsibility for injury, damage or loss resulting from the use of the
material.

The information and recommendations are offered for the user??s consideration and examination, and it is the user??s responsibility to satisfy itself that they
are suitable and complete for its particular use. If buyer repackages this product, legal council should be consulted to insure proper health, safety, and
other necessary information is included on the container.

The Environmental information included under Section 8 hereof as well as the Hazardous Materials Identification System (HMIS) and National Fire
Protection Association (NFPA) ratings have been included by Candle Corporation of America in order to provide additional health and hazard
classification information. The ratings recommended are based upon the criteria supplied by the developers of these rating systems, together with Candle
Corporation of America??s interpretation of the available data.

FOR OTHER PRODUCT INFORMATION CONTACT:
Sterno International The STERNO GROUP
15 Station Road Division of Candle Corporation of America
Barnes 303 Falvey Blvd.
London SW13 9RY Texarkana, Texas 75501-6620
1-44 (0)208 8766935 1-(903) 223-3400

MSDS REVISION INDICATORS: Revised Sections: 1, 16, Header.
REVISION DATE: MAY 5, 2004, SUPERSEDES: MARCH 29, 2004

LAST

C:\to_pdf\MSDS 08 820C, 834, 837, 840, 841, 885-WHT, 924-12CT.doc
;