information Related products Suppliers

Steelmanufacture, chemicals

LOCTITE CORPORATION 09/11/96
ROCKY HILL, CONNECTICUT 06067
EMERGENCY PHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET
Permatex(R) Hi-Temp Metal Repair Compound
26346

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Name: Permatex(R) Hi-Temp Metal Repair Compound
Item No.: 26346
Product Type: Putty

2. COMPOSITION, INFORMATION ON INGREDIENTS

Ingredients CAS No. %

Water 7732-18-5 30-40
Stainless Steel 65997-19-5 20-60
Unknown Proprietary 10-30

Ingredients which have exposure limits

Exposure Limits (TWA) ACGIH OSHA OTHE Ingredients (TLV) (PEL)

Stainless Steel 2.0 mg/m3 None None

Exposure Limits (STEL) ACGIH OSHA
Ingredients (TLV) (PEL)

3. HAZARDS IDENTIFICATION

Toxicity: Irritates eyes, and skin. If ingested will
irritate esophagus and stomach.
Free dust caused by machining is irritating when
inhaled.
Primary Routes of Entry: None known
Signs and symptoms
of Exposure: Dermal exposure: itching, and burning of akin.
Eye contact: Pain, redness, and tearing.
Ingestion: Nausea, vomiting, diarrhea.
Existing Conditions
Aggravated by Exposure: Dermal: Skin diseases.
Inhalation: Asthma, lung diseases.

Literature Referenced Carcinogen
Ingredients Target Organ and Other Health Effects NTP IARC OSHA

Water No Data NO NO NO
Stainless Steel No Data NO NO NO
Unknown No Data NO NO NO
-------------------------------------------------------------------------------
LOCTITE CORPORATION 09/11/96
ROCKY HILL, CONNECTICUT 06067
EMERGENCY PHONE: (860) 571-5100
MATERIAL SAFETY DATA SHEET
Product Name: Permatex(R) Hi-Temp Metal Repair Compound
Item No.: 26346

4. FIRST AID MEASURES

Ingestion: Immediately drink two glasses of water and induce
vomiting by placing finger at back of throat.
Never give anything by mouth to an unconscious
person. Get medical attention immediately.
Inhalation: Remove to fresh air at once if breathing on own.
If breathing has stopped, apply artificial
respiration. Get medical attention.
Skin Contact: Thoroughly wash exposed area with soap and water.
Remove contaminated clothing and launder before
reuse.
Eye Contact: Flush with copious amounts of water for at least
15 minutes. Get medical attention.

5. FIRE FIGHTING MEASURES

Flash Point: Does not apply
Recommended
Extinguishing Agents: Use media suitable for surrounding fire.
Hazardous Products formed
by Fire or Thermal Decomp Irritating organic vapors
Unusual Fire or
Explosion Hazards: Not considered a fire hazard and does not support
combustion. When involved in a fire, does not
contribute any unusual hazards.

Explosive Limits:
(% by volume in air)Lower Not available
(% by volume in air)Upper Not available

6. ACCIDENTAL RELEASE MEASURES

Steps to be taken in case
of spill or leak: Isolate, dike and store discharged material, if
possible; otherwise disperse and flush with water,
observing environmental protection regulations.

7. HANDLING AND STORAGE

Safe Storage: Store under controlled temperature range of 45??F
to 95??F. Do not allow freezing.
(Contact Loctite Customer Service 1-800-243-4874 for shelf Life information)
Handling: Avoid prolonged skin contact. Keep away from eyes.

8. EXPOSURE CONTROLS, PERSONAL PROTECTION
Eyes: Chemical goggles.
Skin: Rubber gloves.
Ventilation: Sufficient to maintain particle concentration
LOCTITE CORPORATION 09/11/96
ROCKY HILL, CONNECTICUT 06067
EMERGENCY PHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET
Product Name: Permatex(R) Hi-Temp Metal Repair Compound
Item No.: 26346

8. EXPOSURE CONTROLS, PERSONAL PROTECTION (continued)

below TLV. Where dust cannot be controlled in this
way, personal protection should be employed.

See Section 2 for Exposure Limits.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Gray putty.
Odor: None
Boiling Point: 210??F
pH: Does not apply
Solubility in Water: Negligible
Specific Gravity 1.56
Volatile Organic Compound
(EPA Method 24) 0%; 0 grams per liter
Vapor Pressure: Not available
Vapor Density: 0.6
Evaporation Rate
(Ether = 1) Less than 1.00 (Butyl acetate = 1)

10. STABILITY AND REACTIVITY

Stability: Stable
Hazardous Polymerization: Will not occur
Incompatibility: Metals such as aluminum, tin, lead, and zinc in
an alkaline environment.
Hazardous Decomposition
Products (non-thermal): Hydrogen gas.

11. TOXICOLOGICAL INFORMATION

See Section 3.

12. ECOLOGICAL INFORMATION

No data available

13. DISPOSAL CONSIDERATIONS

Recommended methods of
disposal: Incinerate following EPA and local regulations.
EPA Hazardous Waste
Number NH - Not a RCRA Hazardous Waste Material
LOCTITE CORPORATION 09/11/96
ROCKY HILL, CONNECTICUT 06067
EMERGENCY PHONE: (860) 571-5100

MATERIAL SAFETY DATA SHEET
Product Name: Permatex(R) Hi-Temp Metal Repair Compound
Item No.: 26346

14. TRANSPORT INFORMATION

DOT (49 CFR 172)
Domestic Ground Transport
Proper Shipping Name: Unrestricted
Hazard Class or
Division: Unrestricted
Identification Number: None
Marine Pollutant: None
IATA
Proper Shipping Name: Unrestricted
Class or Division: Unrestricted
UN or ID Number: None

15. REGULATORY INFORMATION

CA Proposition 65: Not available

16. OTHER INFORMATION

Estimated NFPA(R) Code:
Health Hazard: 1
Fire Hazard: 0
Reactivity Hazard: 1
Specific Hazard: Does not apply

Estimated HMIS(R) Code:
Health Hazard: 1
Flammability Hazard: 0
Reactivity Hazards: 1
Personal Protection: See Section 8.

NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.

Prepared By: Stephen Repetto
Title: Research Chemist, Health and Safety
Company: Loctite Corp., 1001 Tr Br Cr, Rocky Hill CT 06067
(24hr.) Phone: (860) 571-5100
Revision Date: May 09, 1996 Revision: First Issue

;