information Related products Suppliers

Lanolin,ethoxylated propoxylated

12276 San Jose Blvd, Suite 115
Material Safety Data Sheet Jacksonville, FL 32223

January, 2004
818

SECTION 1: PRODUCT IDENTIFICATION AND EMERGENCY INFORMATION
PRODUCT (TRADE) NAME: Clean and Safe
PRODUCT IDENTIFICATION NUMBER(S): 818
CHEMICAL NAME AND SYNONYMS: Ethyl Alcohol Solution
CHEMICAL FORMULA: CH3CH2CH2(OH)
EMERGENCY TELEPHONE NUMBERS: CleanTex: 1-800-771-0529
CHEMTREC (Transportation): (800) 424-9300

SECTION 2: COMPOSITION AND INFORMATION ON INGREDIENTS
COMPONENT __CAS#__ __%__ OSHA PEL(ppm) ACGIH TLV (ppm)
Ethanol SDA-40B 64-17-5 20.00 1000 1000
PPG-12-PEG-50 68458-88-8 0.70 NA NA
Potassium Sorbate 24634-61-5 0.34 NA NA
Benzethonium Chloride (USP) 8001-54-5 0.17 NA NA
Citric Acid 5949-29-1 0.03 NA NA
Deionized Water 7732-18-5 78.76 NA NA

SECTION 3: HAZARDS IDENTIFICATION
Product is distributed as either a single use, presaturated pad, in an aluminum foil packet
or, a plastic dispenser holding up to 50 presaturated applicators. In both cases, all the
liquid is absorbed by the applicator(s). Ethanol may cause irritation of eyes and skin.
Exposure to over 1000ppm may cause headache, drowsiness, loss of appetite, inability to
concentrate and irritation to throat. Ingestion can produce depression of central nervous
system , nausea and vomiting.

Carcinogenicity (OSHA/NTP/IARC/ACGIH): Studies have indicated a correlation between
drinking alcoholic beverages and cancer of the
oral cavity, larynx, esophagus, and liver.
Medical Conditions Aggravated by Exposure: None Listed

SECTION 4: FIRST AID INFORMATION
EYE CONTACT: Flush eyes with water. Contact physician.
SKIN CONTACT: Flush affected area with water.
INHALATION: Move victim to fresh air. Restore or support breathing as needed. Contact
physician immediately.
INGESTION: In the unlikely event of ingestion of a wiper, first aid measures should focus
on removal of the object and preventing choking. Once removed, keep affected
person at rest.Call physician immediately

SECTION 5: FIRE AND EXPLOSION HAZARD DATA
FLASH POINT (TCC): 96oF
FLAMMABLE LIMITS (% BY VOLUME): LEL: NA UEL: NA
AUTOIGNITION TEMPERATURE OF (OC): NA
EXTINGUISHING MEDIA: Use dry chemical. "alcohol foam" or carbon dioxide. Water may be ineffective.
Water may be used to keep fire exposed containers cool.
UNUSUAL FIRE OR EXPLOSION HAZARDS: Liquid may release flammable vapors which can ignite at or
above flash point.

NFPA RATING: HEALTH (0)
FLAMMABILITY (3)
REACTIVITY (0)

Formulation is classified as an OSHA Class IB Flammable Liquid
NA = Not Available

January, 2004
818

SECTION 6: ACCIDENTAL RELEASE MEASURES
Since the formulation is completely absorbed by the applicator and the amount of isopropyl alcohol
per applicator is small, the chance of a significant spill occurring is small. In the event
however, a significant amount of liquid is released, ventilate the area, especially low areas
where vapors may collect and remove all sources of ignition. Cleanup personnel need protection
against liquid contact and vapor inhalation

SECTION 7: HANDLING AND STORAGE
Store in a clean, cool, ventilated area away from sources of ignition and oxidizing agents. Handle
and store in a manner suitable for an OSHA Class IB Flammable Liquid. Electrical services must
meet applicable codes. Use non-sparking tools.

SECTION 8: EXPOSURE CONTROL - PERSONAL PROTECTION
Provide ventilation to maintain TLV(s). Use non-sparking tools. Avoid inhalation of vapors,
contact with eyes and repeated or prolonged contact with skin. Do not take internally.

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
BOILING POINT (OF(oC)): % VOLATILE BY VOLUME @ 25oC:
188(86.7) >98
VAPOR PRESSURE (mmHg @ 25oC): 28 EVAPORATION RATE(BUTYL ACETATE=1): NA
VAPOR DENSITY (AIR=1): >1 FORM: Saturated Wipe
% SOLUBLE IN WATER @ 25OC: 100 ODOR: Alcohol
SPECIFIC GRAVITY (G/CC@25oC) 0.98 APPEARANCE OF LIQUID: Clear

SECTION 10: STABILITY AND REACTIVITY
STABILITY: Stable
HAZARDOUS POLYMERIZATION: Not likely
INCOMPATIBILITIES/CONDITIONS TO AVOID: Contact with acetyl chloride and a wide range of
oxidizing agents may react violently
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon Monoxide can form on incomplete combustion.

SECTION 11: TOXICOLOGICAL INFORMATION
Not Available

SECTION 12: ECOLOGICAL INFORMATION
Not Available

SECTION 13: DISPOSAL CONSIDERATIONS
Follow Federal, State and Local regulations.
January, 2004
818

SECTION 14: TRANSPORT INFORMATION

DOT CLASSIFICATION: Not Regulated
Proper Shipping Name:
Hazard Class:
UN Number:
Packing Group:
Hazard Labeling:

IATA/ICAO CLASSIFICATION: Not Regulated
Proper Shipping Name:
Hazard Class:
UN Number:
Packing Group:
Hazard Labeling:

IMDG CLASSIFICATION: Not Regulated
Proper Shipping Name:
Hazard Class:
IMDG Packing Group:
Flash Point:
Marine Pollutant:

SECTION 15: REGULATORY INFORMATION
SARA TITLE III REPORTING:
Toxic Chemical(Section 313):
Extremely Hazardous Substance
(Section 302, 304, 311,312):
Hazard Class: Chronic Health Yes
Acute Health Yes
Fire Hazard Yes
Pressure Hazard No
Reactivity Hazard No
All components in
TSCA INVENTORY STATUS:
the formulation are
listed in the TSCA
inventory

SECTION 16: OTHER INFORMATION
The information provided herein is compiled from internal reports and data from professional
publication. It is furnished without warranty of any kind, expressed or implied. It is intended
solely to assist in evaluating suitability and proper use of the material and in implementing
safety precautions and procedures. Employers should use this information as a supplement to other
information gathered by them and must make independent determination of suitability and
completeness of information from all sources to assure proper use of these materials. All
information used must be determined by the user to be in accordance with applicable federal, state
and local laws and regulations.

;