Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-1H-imidazole-1-ethanol2-norocoalkyl derivs.

MATERIAL SAFETY DATA SHEET
ELLANAR JEWELRY CLEANER CONCENTRATE NON-AMMONIATE PCN(s): 273,( 271-obsolete) Publication Date 11/30/05 REV: F
1. SUPPLIER AND EMERGENCY INFORMATION Emergency Phone Numbers:
L&R Manufacturing Company Product Information For emergencies involving a spill, leak,
577 Elm Street, P.O. Box 607 Call: 201-991-5330 fire or accident contact:
Kearny, NJ 07032 - 0607 USA CHEMTREC - 800-424-9300
within the United States or 703-527-3887
for international collect calls.
2. COMPOSITION/INFORMATION ON INGREDIENT
Component CAS Number Percentage
WATER 7732-18-5 50-70
ISOPROPYL ALCOHOL 67-63-0 1-5
SODIUM COCOAMPHOACETATE 68608-65-1 20-30
Sodium Hydroxide 1310-73-2 1-3
3. HAZARDS IDENTIFICATION
Physical appearance and odor: Blue clear liquid with characteristic detergent type odor.
A: WARNING STATEMENT: Based on currently available data, this product meets the regulatory definition of a hazardous substance.
Good industrial hygiene practices should be used when handling it.
Acute Eyes: Direct contact causes irritation, redness and possible tearing
Acute Skin: Prolonged or repeated contact causes redness, and drying of the skin.
Acute Inhalation: Breathing high concentrations of vapors or mists may cause irritation to the nose and drowsiness.
B: POTENTIAL HEALTH EFFECTS:
Acute Ingestion: Not known, but expected to cause irritation to the gastrointestinal tract, characterized by nausea, diarrhea,
vomiting, abdominal pains.
Chronic Effects: This product does not contain any ingredient designated by IARC, NTP, ACGIH or OSHA as probable or
suspected human carcinogens.
4. FIRST AID MEASURES
Eye Exposure: Hold eyelids open and flush with a steady, gentle stream of water for at least 15 minutes. Seek medical attention.
Skin Exposure: Wash thoroughly with water. If irritation or redness develops, seek medical attention.
Inhalation: If respiratory irritation or distress occurs, move victim to fresh air. Seek medical attention if respiratory irritation or
distress continues.
Ingestion: Seek immediate medical attention. DO NOT INDUCE VOMITING. If conscious, give large amounts of water.
MEDICAL CONDITIONS POSSIBLY AGGRAVATED BY EXPOSURE: Skin contact may aggravate existing skin disease.
5. FIRE FIGHTING MEASURES
FIRE HAZARD DATA:
FLASH POINT: 109 - 111 o F ( 42.8o C) METHOD USED: Tag Closed Cup
Flammability limits ( vol/vol% ) : Lower: No Data Upper: No Data
Extinguishing Media: Extinguish with dry chemical, CO2 or a BC/ABC extinguisher.
Special Fire Fighting Procedures: None known.
Unusual Fire and Explosion Hazards: Product will burn under fire conditions. Closed containers may explode, due to build up
of pressure when exposed to extreme heat.
Hazardous Decomposition Materials: (under fire conditions) Oxides of nitrogen and carbon.
6. ACCIDENTAL RELEASE MEASURES
Cleanup and Disposal of Spill: Biodegradable product. Mop up spill and dispose of by dilution to a sanitary sewer system as
permitted by local, state and federal regulations.
Environmental and Regulatory Reporting: Not required.
7. HANDLING AND STORAGE
Minimum/Maximum Storage Temperatures: 39 to 120 o F. Protect from freezing. Freezing will NOT damage the product.
Product may be thawed in warm water and then mixed to assure homogeneity.
HANDLING: AVOID CONTACT WITH SKIN, EYES OR CLOTHING
8. EXPOSURE CONTROL/PERSONAL PROTECTION
General: These recommendations provide general guidance for handling of this product. Because specific work environments and
material handling practices vary, safety procedures should be developed for each intended application. When developing
safe handling procedures, do not overlook the need to clean and dispose of the material. Waste resulting from the use of
this product should be handled in accordance with Section 13: Disposal Considerations.
Exposure Guidelines: Exposure limits are recommended worker breathing limits. The following limits apply to this material:
INGREDIENTS LIMITS
Isopropyl Alcohol 400 PPM OSHA/ AACGIH TWA
Sodium Cocoamphoacetate None established
2 mg/ M3
Sodium Hydroxide
8. EXPOSURE CONTROL/PERSONAL PROTECTION CONTINUE Engineering Controls: Normal room ventilation.
Respiratory Controls: For reasonable uses of this material, respiratory protection should not be necessary.
Eye/Face Protection: Safety glasses to protect from splashing.
Skin Protection: Rubber or plastic gloves to avoid drying and irritation to the skin.
Work Practice Control: Normal hygiene in the work area should be taken when working with or handling this product.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical Appearance: Clear blue liquid. Odor: Detergent like odor.
pH: 13 + as concentrate Specific Gravity: 1.06 to 1.07
Water Solubility: Soluble Melting Point Range: Not available
Freezing Point Range: < 32o F Boiling Point : 210- 212 o F
Vapor Pressure: Not Established Vapor Density: Not established
Percent volatile by volume: Approx. 70 - 80% as water V.O.C. ( calculated) : 0.43 lbs./ gal or 53.5 grams / l.
10. STABILITY AND REACTIVITY
Chemical Stability:
This material is stable under normal handling and storage conditions as described in Section 7.
Conditions to be avoided: Heat, open flame.
Materials/Chemicals to be avoided: strong acids, strong oxidizing agents, aluminum.
Decomposition type: Thermal Oxides of carbon and nitrogen.
Hazardous Polymerization: WILL NOT OCCUR.
Avoid the following to inhibit hazardous polymerization: NOT APPLICABLE.
11. TOXICOLOGICAL INFORMATION
Acute Eye Irritation: Irritating to eyes.
Acute Skin Irritation: No test data found for product.
Acute Dermal Toxicity: No test data found for product.
Acute Respiratory Irritation: No test data found for product.
Acute Inhalation Toxicity: No test data found for product.
Acute Oral Toxicity: LD50 (rat) = 17.2 ml/kg for sodium cocoamphoacetate
LD50( rat ) =3600 mg/kg for isopropyl alcohol
LD50( mouse) = 40 mg/kg. For sodium hydroxide
Chronic Toxicity: This product does not contain any substances that are considered by OSHA, NTP, IARC OR ACGIH to be a
probable or suspected human carcinogens. No additional test data was found for this product.
12. ECOLOGICAL INFORMATION
Ecotoxicological Information: No data found
13. DISPOSAL CONSIDERATIONS
This product is biodegradable and can be disposed in sanitary sewer system where permitted by local, federal and state regulations.
14. TRANSPORTATION INFORMATION For domestic ground transport : ORM-D. For containers over one gallon
and for export: FLAMMABLE LIQUIDS, CORROSIVE n.o.s.( Contains isopropanol, sodium hydroxide) 3, UN 2924,
PG III. Do not stack cartons more than five high.
15. REGULATORY INFORMATION:
Inventory Issues: All components of this product are listed on the U.S. TSCA, Canadian DSL, European EINECS/ELINS chemical listings.

16. OTHER INFORMATION
National Fire Protection Association Health Flammability Reactivity General
Hazard Rating, NFPA 2 2 0 --



MSDS CHANGES
REV DATE DESCRIPTION OF CHANGE
F 11/30/05 Reissued




Disclaimer: The information herein is given in good faith but no warranty expressed or implied is made
Prepared By: L&R Manufacturing Company Date: 02/02/99
Product Name: ELLANAR JEWELRY CLEANER CONCENTRATE NON-AMMONIATE
;

Recommended suppliers

GIHI CHEMICALS CO.,LIMITED

China (Mainland) Assessed Supplier

Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-1H-imidazole-1-ethanol 2-norcoco alkyl derivs. and sodium hydroxide

  • Assay:Pharmaceutical grade,
  • Appearance:Powder
  • Package:According to customer requirements
  • Storage:dry and cool
  • Transportation:Air and sea transportation
  • Application:Pharmaceutical Industry
Contact Supplier

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-1H-imidazole-1-ethanol 2-norcoco alkyl derivs. and sodium hydroxide

  • Assay:Industrial Grade,
  • Appearance:detailed see specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by air or by sea
  • Application:Used in Synthesis, Pharmaceuticals and other fields
Contact Supplier

Leader Biochemical Group

China (Mainland) Assessed Supplier

China Largest factory Manufacturer Supply SODIUM COCOAMPHOACETATE CAS 68608-65-1

  • Assay:AAAAA,
  • Appearance:POWDER
  • Package:25KG/Drum
  • Storage:2-8°C
  • Transportation:By air /Sea/ coruier
  • Application:Pharm chemicals industry
Contact Supplier

HENAN NEW BLUE CHEMICAL CO.,LTD

China (Mainland) Assessed Supplier

Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-1H-imidazole-1-ethanol2-norocoalkyl derivs.

  • Assay:1,
  • Appearance:White powder
  • Package:25KGS/Drum
  • Storage:Room temperature
  • Transportation:BY SEA
  • Application:API,Pharmaceutical intermediates
Contact Supplier

Qingdao Beluga Import and Export Co., LTD

China (Mainland) Assessed Supplier

Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-1H-imidazole-1-ethanol 2-norcoco alkyl derivs. and sodium hydroxide CAS:68608-65-1

  • Assay:99%
  • Appearance:Brown powder
  • Package:According to customer requirements
  • Storage:Avoid light, ventilation and shade
  • Transportation:Sea or Air
  • Application:It is an important raw material and intermediate
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View