information Related products Suppliers

Light Stabilizer-944

Material Safety Data Sheet

Identity: Non-Reinforced Plastic
Lumber

Chemical Description: Foamed, colored, recycled polyolefin
material.
Section 1:
Product Manufacturer: Trimax Building Products
1305 West 29th Street, Bdg Anderson, IN 46016
Telephone Number for Information: 1-877-9TRIMAX (1-877-987-4629)
Emergency Telephone Number: Trimax Building Products 1-765-643-9373
Chemtrec 1-800-424-9300

Section 2: Hazardous Ingredients Information
Depending on the color additive used, the following hazardous ingredients may be found in ratios up to
the amounts listed:
OSHA/PEL ACGIH/TLV % By
CAS # COMMON NAME (mg/m3) (mg/m3) Weight NTP IARC OSHA
1333-86-4 Carbon Black 3.500 3.500 <1.5 N Y N
Titanium Dioxide *
13463-67-7 15.000 10.000 <2.07 N N N
Amorphous Silica *
1129626-00-8 6.000 10.000 <0.21 N N N
Lead **
7439-92-1 0.050 0.150 <0.798 N Y N
Chromium **
7440-47-3 0.012 ----- <0.183 Y Y Y
70624-18-9 Not Est. ----- <0.153 N N N
Poly Hexamethylene***

* Found in white color additive only.
** Found in yellow color additive only.
*** Found in green color additive only.
OHSA ?? Occupation, Safety & Health Administration
LARC ?? International Agency for Research on Cancer
NTP ?? National Toxicology Program
ACHIH ?? American Conference of Governmental Industrial Hygienists
TLV ?? Threshold Limit Values
PEL ?? Permissible Exposure Limit

1
Revised: January 1, 2006
Material Safety Data Sheet
Section 3: Physical and Chemical Properties
Boiling Point: N/A Specific Gravity: .65 - .88 grams/cubic cm
257o F
Vapor Pressure: N/A Melting Point:
Vapor Density: N/A Evaporative Rate: Nil
Solubility in Water: N/A
Appearance: Colored solid plastic lumber.
Odor: Slight Olefinic

Section 4: Fire and Explosion Hazard Data
Greater than 600oF (ASTM D-1929)
Flash Point:
Flammable Limits: LEL ?? N/A
UEL ?? N/A
Extinguishing Media: Water, Carbon Dioxide, Foam or Dry Chemical
Special Fire Fighting Instructions: Use self-contained breathing apparatus and full
protective gear.
Unusual Fire Explosion Hazards: None.

Section 5: Stability and Reactivity
Stability: Stable

Materials to Avoid: None known
Combustion/Decomposition Products: Water, carbon dioxide, carbon monoxide, nitrogen.
Carbon residue and heavy metal oxides may be released
depending on the color additive used. Due to the fact that
a significant amount of the material is recycled plastic,
other undetermined compounds could be released in small
quantities.
Hazardous Polymerization: Will not occur.

2
Revised: January 1, 2006
Material Safety Data Sheet

Section 6: Health Hazard Data
Primary Route(s) of Exposure: Inhalation or ingestion of dust.
Potential Health Effects: Accute (Short-Term):
Breathing dust from this product may cause short-term
irritation of the mouth, nose and throat.

Eye contact with dust from this product may cause
mechanical irritation.

Chronic (Long-Term):
(See Section 9 ?? Toxicological Information)
Medical Conditions Aggravated by Exposure:
Long-term breathing conditions that are aggravated by
mechanical irritants may be at a higher risk for worsening
from contact with dust from this product.
First Aid Measures: Inhalation:
Move person to fresh air; seek medical attention.
Eye Contact:
Do not rub eyes; flush eyes with running water for at least
15 minutes; seek medical attention.
Ingestion:
Ingestion of this material is unlikely; however, if it does
occur, seek medical attention immediately.

Section 7: Precautions for Safe Handling and Use
In Case of Spills or Accidental Release: Scoop up or vacuum material. Place in a suitable
container for disposal in accordance with any
local, state or federal laws.
Storage Temperature: This product can be maintained at a temperature
less than or equal to 120o F.
Storage Pressure: N/A.
Storage Precautions: Do not store near heat, open flames or strong
oxidants or alkalis; store flat and well supported
across entire span.

3
Revised: January 1, 2006
Material Safety Data Sheet

Section 8: Control Measures
Respiratory Protection: A properly fitting NIOSH approved dust mask
must be worn when machining this material.

Ventilation: Machine this product only in a well ventilated
area. Dust collection systems should be used to
reduce dust levels below the personal exposure
level when local ventilation is not sufficient,
particularly during machining operations when
higher levels of dust are generated.
Protective Gloves: Should be worn when handling this product.
Eye Protection: Properly fitting safety glasses, goggles or face
shield should be worn when machining this
product.
Work/Hygienic Practices: Wash hands before eating, drinking or smoking.

Section 9: Toxicological Information

Eye Effects: No data available.
Skin Effects: Chronic exposure may cause antimony measles.
Carcinogenicity: Lead Chromate is classified by:
IARC: Group 2B
NTP: Known carcinogen
ACGIH: A2 Suspect human carcinogen.

Mutagenicity: Test results for lead chromate pigments are
conflicting.
Reproductive Effects: Possible risk of irreversible reproductive effects.

NOTE: Risk of exposure to hazardous ingredients is reduced due to encapsulation in plastic.

4
Revised: January 1, 2006

;