Selenic acid, lead(2+)salt (1:1)
Material Safety Data Sheet
acc. to OSHA and ANSI
1 Identification of substance:
Product details:
Product name: Lead (II) selenate
2 Composition/Data on components:
Chemical characterization:
Description: (CAS#)
Lead (II) selenate (CAS# 7446-15-3): 100%
Identification number(s):
EINECS Number: 231-199-4
3 Hazards identification
Hazard description:
T Toxic
N Dangerous for the environment
Information pertaining to particular dangers for man and environment
R 61 May cause harm to the unborn child
R 62 Possible risk of impaired fertility
R 23/25 Toxic by inhalation and if swallowed.
R 33 Danger of cumulative effects.
R 50/53 Very toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic environment
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
HEALTH 3 Health (acute effects) = 3
Flammability = 0
FIRE 0
Reactivity = 0
REACTIVITY 0
4 First aid measures
General information
Immediately remove any clothing soiled by the product.
Remove breathing apparatus only after contaminated clothing has been
completely removed.
In case of irregular breathing or respiratory arrest provide artificial
respiration.
Material Safety Data Sheet
acc. to OSHA and ANSI
Product name: Lead (II) selenate
After inhalation
Supply fresh air. If required, provide artificial respiration. Keep
patient warm.
Seek immediate medical advice.
After skin contact
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
After eye contact
Rinse opened eye for several minutes under running water. Then consult a
doctor.
After swallowing
Do not induce vomiting; immediately call for medical help.
Seek immediate medical advice.
5 Fire fighting measures
Suitable extinguishing agents
Special powder for metal fires. Do not use water.
For safety reasons unsuitable extinguishing agents Water
Special hazards caused by the material, its products of combustion or
resulting gases:
In case of fire, the following can be released:
Toxic metal oxide fume
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.
6 Accidental release measures
Person-related safety precautions:
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Measures for environmental protection:
Do not allow material to be released to the environment without proper
governmental permits.
Measures for cleaning/collecting:
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Additional information:
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
Handling
Information for safe handling:
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
Open and handle container with care.
Information about protection against explosions and fires:
The product is not flammable
Material Safety Data Sheet
acc. to OSHA and ANSI
Product name: Lead (II) selenate
Storage
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Store away from oxidizing agents.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.
8 Exposure controls and personal protection
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals
and having an average face velocity of at least 100 feet per minute.
Components with limit values that require monitoring at the workplace:
Selenium and selenium compounds (as Se)
mg/m3
ACGIH TLV 0.2
Austria MAK 0.1
Belgium TWA 0.2
Denmark TWA 0.1
Finland TWA 0.1; 0.3-STEL
Germany MAK 0.1
Hungary 0.1-STEL
Japan OEL 0.1
Korea TLV 0.2
Netherlands MAC-TGG 0.2
Poland TWA 0.1; 0.3-STEL
Sweden NGV 0.1
Switzerland MAK-W 0.1
United Kingdom TWA 0.1
USA PEL 0.2
Lead, elemental, and inorganic compounds (as Pb)
mg(Pb)/m3
ACGIH TLV 0.05 Confirmed animal carcinogen
Austria MAK 0.1
Belgium TWA 0.15
Denmark TWA 0.1
Germany MAK 0.1
Japan OEL 0.1
Netherlands TWA 0.15
Norway TWA 0.05
Poland TWA 0.05
Switzerland MAK-W 0.1
United Kingdom TWA 0.1
Finland TWA 0.1
France TWA 0.15
Hungary STEL 0.04
Sweden TWA 0.1 (total dust)
0.05 (resp. dust)
USA PEL 0.05
Additional information: No data
Material Safety Data Sheet
acc. to OSHA and ANSI
Product name: Lead (II) selenate
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures for handling chemicals should be
followed.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Breathing equipment:
Use suitable respirator when high concentrations are present.
Refer to 29CFR1910.1025 for regulations on respiratory protection
required during exposure to lead and lead compounds.
Protection of hands:
Impervious gloves
Check protective gloves prior to each use for their proper condition.
Material of gloves
The selection of suitable gloves not only depends on the material, but
also on quality. Quality will vary from manufacturer to manufacturer.
Eye protection: Safety glasses
Body protection: Protective work clothing.
9 Physical and chemical properties:
General Information
Form: Powder
Odor: Not determined
Change in condition
Melting point/Melting range: Decomposes ??C
Boiling point/Boiling range: Not determined
Sublimation temperature / start: Not determined
Flash point: Not applicable
Ignition temperature: Not determined
Decomposition temperature: Not determined
Danger of explosion: Product does not present an
explosion hazard.
Explosion limits:
Lower: Not determined
Upper: Not determined
Vapor pressure: Not determined
Density at 20??C (68??F): 6.37 g/cm3
Solubility in / Miscibility with
Water: Insoluble
10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to
specifications.
Materials to be avoided: Oxidizing agents
Dangerous reactions No dangerous reactions known
Material Safety Data Sheet
acc. to OSHA and ANSI
Product name: Lead (II) selenate
Dangerous products of decomposition: Toxic metal oxide fume
11 Toxicological information
Acute toxicity:
Primary irritant effect:
on the skin: Irritant to skin and mucous membranes.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
Subacute to chronic toxicity:
Selenium may cause amyotrophic lateral sclerosis, bronchial irritation,
gastrointestinal distress, vasopharyngeal irritation, garlic odor on
breath and sweat, metallic taste, pallor, irritability, excessive
fatigue, loss of fingernails and hair, pulmonary edema, anemia and weight
loss.
Lead and lead compounds may cause abdominal pain, diarrhea, loss of
appetite, metallic taste, nausea, vomiting, lassitude, insomnia, muscle
weakness, joint and muscle pain, irritability, headache and dizziness.
Red blood cells may be damaged resulting in anemia. Gastritis and injury
to the kidneys, liver, male gonads, and central nervous system may also
occur.
Additional toxicological information:
May cause harm to the unborn child.
Possible risk of impaired fertility.
To the best of our knowledge the acute and chronic toxicity of this
substance is not fully known.
EPA-B2: Probable human carcinogen, sufficient evidence from animal
studies; inadequate evidence or no data from epidemiologic studies.
IARC-2B: Possibly carcinogenic to humans: limited evidence in humans in
the absence of sufficient evidence in experimental animals.
ACGIH A3: Animal carcinogen: Agent is carcinogenic in experimental
animals at a relatively high dose, by route(s) of administration, at
site(s), of histologic type(s), or by mechanism(s) not considered
relevant to worker exposure. Available epidemologic studies do not
confirm an increased risk of cancer in exposed humans. Available
evidence suggests that the agent is not likely to cause cancer in humans
except under uncommon or unlikely routes or levels of exposure.
12 Ecological information:
Ecotoxical effects:
Remark: Very toxic for fish
General notes:
Also poisonous for fish and plankton in water bodies.
Do not allow material to be released to the environment without proper
governmental permits.
Very toxic for aquatic organisms
13 Disposal considerations
Product:
Recommendation
Consult state, local or national regulations to ensure proper disposal.
Material Safety Data Sheet
acc. to OSHA and ANSI
Product name: Lead (II) selenate
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.
14 Transport information
DOT regulations:
Hazard class: 6.1
Identification number: UN2630
Packing group: I
Proper shipping name (technical
name): SELENATES
Label 6.1
Land transport ADR/RID (cross-border)
ADR/RID class: 6.1 Toxic substances
Danger code (Kemler): 66
UN-Number: 2630
Packaging group: I
Description of goods: 2630 SELENATES (Lead (II) selenate)
Maritime transport IMDG:
IMDG Class: 6.1
UN Number: 2630
Label 6.1
Packaging group: I
Proper shipping name: SELENATES
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: 6.1
UN/ID Number: 2630
Label 6.1
Packaging group: I
Proper shipping name: SELENATES
Material Safety Data Sheet
acc. to OSHA and ANSI
Product name: Lead (II) selenate
15 Regulations
Product related hazard informations:
Hazard symbols:
T Toxic
N Dangerous for the environment
Risk phrases:
61 May cause harm to the unborn child
62 Possible risk of impaired fertility
23/25 Toxic by inhalation and if swallowed.
33 Danger of cumulative effects.
50/53 Very toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic environment
Safety phrases:
53 Avoid exposure - obtain special instructions before use.
20/21 When using do not eat, drink or smoke.
28 After contact with skin, wash immediately with plenty of water
45 In case of accident or if you feel unwell, seek medical advice
immediately.
60 This material and its container must be disposed of as hazardous
waste.
61 Avoid release to the environment. Refer to special instructions/
Safety data sheets
National regulations
All components of this product are listed in the U.S. Environmental
Protection Agency Toxic Substances Control Act Chemical substance
Inventory.
This product contains a chemical known to the state of California to
cause cancer or reproductive toxicity.
All components of this product are listed on the Canadian Non-Domestic
Substances List (NDSL).
Information about limitation of use:
For use only by technically qualified individuals.
This product contains selenium and is subject to the reporting
requirements of section 313 of the Emergency Planning and Community Right
to Know Act of 1986 and 40CFR372.
This product contains lead and is subject to the reporting requirements
of section 313 of the Emergency Planning and Community Right to Know Act
of 1986 and 40CFR372.
Other regulations, limitations and prohibitive regulations
Refer to 29CFR1910.1025 for regulations concerning lead and lead
compounds.
;
Recommended suppliers
China (Mainland)
Assessed Supplier
LEAD(II) SELENATE
- Assay:Pharmaceutical grade,
- Appearance:Powder
- Package:According to customer requirements
- Storage:dry and cool
- Transportation:Air and sea transportation
- Application:Pharmaceutical Industry
Contact Supplier
China (Mainland)
Assessed Supplier
Factory Supply Lead selenate
- Assay:99.9%
- Appearance:Refer to COA
- Package:drum
- Storage:keep in cool and dry place
- Transportation:by sea or by air
- Application:Intermediates and materials
Contact Supplier
China (Mainland)
Assessed Supplier
LEAD(II) SELENATE
- Assay:Industrial Grade,
- Appearance:detailed see specifications
- Package:according to the clients requirement
- Storage:Store in dry, dark and ventilated place.
- Transportation:by air or by sea
- Application:Used in Synthesis, Pharmaceuticals and other fields
Contact Supplier
China (Mainland)
Assessed Supplier
Selenic acid, lead(2+)salt (1:1)
- Assay:99%
- Appearance:
- Package:drum
- Storage:
- Transportation:By Sea/Air/DHL
- Application:chemical
Contact Supplier
China (Mainland)
Assessed Supplier
LEAD(II) SELENATE
- Assay:99%
- Appearance:White fine powder
- Package:according to the clients requirement
- Storage:
- Transportation:Transportation by express, air, sea; port mainly to Qingdao / Tianjin / Shanghai, or according to customer needs to send different ports and aviation.
- Application:An important raw material and intermed
Contact Supplier