information Related products Suppliers

1H-Pyrrole,1-(2-bromoethyl)-

B1622

Material Safety Data Sheet
PROTECTIVE CLOTHING
RISK PHRASES
HAZARD WARNINGS
Irritating to skin, eyes, and the respiratory system.
Refrigerate.

Section I. Chemical Product and Company Identification
Chemical Name 1-(2-Bromoethyl)pyrrole
TCI America
Supplier
B1622
Catalog Number
9211 N. Harborgate St.
Portland O Synonym 1H-Pyrrole, 1-(2-bromoethyl)- (9CI)
1-800-423-8616
C6H8BrN
Chemical Formula
In case of Chemtrec?
CAS Number 78358-86-8 Emergency (800) 424-9300 (U.S.)
Call (703) 527-3887 (International)

Section II. Composition and Information on Ingredients
Toxicology Data
Percent (%) TLV/PEL
Chemical Name CAS Number
Not available. Not available.
1-(2-Bromoethyl)pyrrole Min. 95.0
78358-86-8
(GC)

Section III. Hazards Identification
Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the
Acute Health Effects
eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening,
or, occasionally, blistering.
Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.

CARCINOGENIC EFFECTS : Not available.
Chronic Health Effects
MUTAGENIC EFFECTS : Not available.
TERATOGENIC EFFECTS : Not available.
DEVELOPMENTAL TOXICITYNot available.
:
Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.

Section IV. First Aid Measures
Eye Contact Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15
minutes. Get medical attention.

Skin Contact In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing
before reuse. Thoroughly clean shoes before reuse. Get medical attention.
If the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or
Inhalation
waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not
improve.
INDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat.
Ingestion
Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth
resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the
toxic material was ingested; the absence of such signs, however, is not conclusive.

Section V. Fire and Explosion Data
Not available.
Auto-Ignition
May be combustible at high temperature.
Flammability
Flammable Limits
Flash Points Not available.
Not available.

Combustion Products These products are toxic carbon oxides (CO, CO 2), nitrogen oxides (NO x), halogenated compounds.

Fire Hazards Not available.

Risks of explosion of the product in presence of mechanical impact: Not available.
Explosion Hazards
Risks of explosion of the product in presence of static discharge: Not available.

Fire Fighting Media SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.
and Instructions
Consult with local fire authorities before attempting large scale fire-fighting operations.

Emergency phone number (800) 424-9300
Continued on Next B1622 1-(2-Bromoethyl)pyrrole
Section VI. Accidental Release Measures
Spill Cleanup Irritating material.
Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning the spill by
Instructions
rinsing any contaminated surfaces with copious amounts of water. Consult federal, state, and/or local authorities for
assistance on disposal.

Section VII. Handling and Storage
IRRITANT. REFRIGERATE. Keep away from heat. Mechanical exhaust required. When not in use, tightly seal the
Handling and Storage
container and store in a dry, cool place. Avoid excessive heat and light. Do not breathe gas/fumes/ vapor/spray.
Information
Always store away from incompatible compounds such as oxidizing agents.

Section VIII. Exposure Controls/Personal Protection
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their
Engineering Controls
respective threshold limit value. Ensure that eyewash station and safety shower is proximal to the work-station location.

Splash goggles. Lab coat. Vapor respirator. Boots. Gloves. Suggested protective clothing might not be sufficient;
Personal Protection
consult a specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent.

Exposure Limits Not available.

Section IX. Physical and Chemical Properties
Solubility
Liquid. (Reddish-Yellow-Tan Clear.)
Physical state @ 20??C Not available.

1.47 (water=1)
Specific Gravity

Molecular Weight Partition Coefficient
174.04 Not available.

Boiling Point Vapor Pressure
Not available. Not available.

Not available. Not available.
Melting Point Vapor Density

1.546-1.550 Not available.
Volatility
Refractive Index

Not available.
Critical Temperature Odor
Not available.

Not available. Not available.
Viscosity Taste

Section X. Stability and Reactivity Data
This material is stable if stored under proper conditions. (See Section VII for instructions)
Stability

Conditions of Instability Avoid excessive heat and light.

Incompatibilities Reactive with oxidizing agents.

Section XI. Toxicological Information
Not available.
RTECS Number

Eye Contact. Ingestion. Inhalation.
Routes of Exposure

Not available.
Toxicity Data

CARCINOGENIC EFFECTS : Not available.
Chronic Toxic Effects
MUTAGENIC EFFECTS : Not available.
TERATOGENIC EFFECTS : Not available.
DEVELOPMENTAL TOXICITYNot available.
:
Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.
Irritating to eyes and skin on contact. Inhalation causes irritation of the lungs and respiratory system. Inflammation of the
Acute Toxic Effects
eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening,
or, occasionally, blistering.
Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.

Emergency phone number (800) 424-9300
Continued on Next B1622 1-(2-Bromoethyl)pyrrole
Section XII. Ecological Information
Not available.
Ecotoxicity

Not available.
Environmental Fate

Section XIII. Disposal Considerations
Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a
Waste Disposal
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
federal, state and local regulations when disposing of the substance.

Section XIV. Transport Information
DOT Classification Not a DOT controlled material (United States).

Not applicable.
PIN Number

Proper Shipping Name Not applicable.

Packing Group (PG) Not applicable.

DOT Pictograms

Section XV. Other Regulatory Information and Pictograms
TSCA Chemical Inventory This product is NOT on the EPA Toxic Substances Control Act (TSCA) inventory. The following notices are required by 40
CFR 720.36 (C) for those products not on the inventory list:
(EPA)
(i) These products are supplied solely for use in research and development by or under the supervision of a technically
qualified individual as defined in 40 CFR 720.0 et sec.
(ii) The health risks of these products have not been fully determined. Any information that is or becomes available will be
supplied on an MSDS sheet.

WHMIS Classification Not available.
(Canada)
EINECS Number (EEC) Not available.

EEC Risk Statements R36/37/38- Irritating to eyes, respiratory system and skin.

Japanese Regulatory Data Not available.

Section XVI. Other Information
Version 1.0
Validated on 11/14/2006.
Printed 11/14/2006.

Notice to Reader
TCI laboratory chemicals are for research purposes only and are NOT intended for use as drugs, food additives, households, or pesticides. The information herein is believed to be correct, but does not
claim to be all inclusive and should be used only as a guide. Neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the
information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All chemical reagents must be handled with the recognition that their chemical,
physiological, toxicological, and hazardous properties have not been fully investigated or determined. All chemical reagents should be handled only by individuals who are familiar with their potential
hazards and who have been fully trained in proper safety, laboratory, and chemical handling procedures. Although certain hazards are described herein, we can not guarantee that these are the only hazards
which exist. Our MSDS sheets are based only on data available at the time of shipping and are subject to change without notice as new information is obtained. Avoid long storage periods since the
product is subject to degradation with age and may become more dangerous or hazardous. It is the responsibility of the user to request updated MSDS sheets for products that are stored for extended
periods. Disposal of unused product must be undertaken by qualified personnel who are knowledgeable in all applicable regulations and follow all pertinent safety precautions including the use of
appropriate protective equipment (e.g. protective goggles, protective clothing, breathing equipment, facial mask, fume hood). For proper handling and disposal, always comply with federal, state, and local
regulations.
Printed 11/14/2006.

;