3H-2,1-Benzoxathiol-3-one,1,1-dioxide

MSDS  :
 2-Sulfobenzoic acid cyclic anhydride
CAS  
:
 81-08-3
SYNONYMS  
:
 

Section 1 - Chemical Product and Company Identification

MSDS Name: 2-Sulfobenzoic acid cyclic anhydride
Catalog Numbers: AC419910000, AC419910100, AC419910250, AC419911000, NC9576244
Synonyms:
2-Sulfobenzoic anhydride; 1,3-Dihydro-2,1lambda~6~-benzoxathiole-1,1,3-trione.
Company Identification:

              Fisher Scientific
              1 Reagent Lane
              Fair Lawn, NJ 07410
For information, call:
201-796-7100
Emergency Number:
201-796-7100
For CHEMTREC assistance, call:
800-424-9300
For International CHEMTREC assistance, call:
703-527-3887

Section 2 - Composition, Information on Ingredients

CAS# Chemical Name Percent EINECS/ELINCS
81-08-3 2-Sulfobenzoic acid cyclic anhydride >90 201-322-6

Section 3 - Hazards Identification

EMERGENCY OVERVIEW

Appearance: white to beige solid.
Danger! Causes burns by all exposure routes. Harmful if swallowed, inhaled, or absorbed through the skin.
Target Organs: Respiratory system, gastrointestinal system, eyes, skin.


Potential Health Effects
Eye: Causes eye burns.
Skin: Harmful if absorbed through the skin. Causes skin burns.
Ingestion: Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation: Harmful if inhaled. Causes chemical burns to the respiratory tract.
Chronic: No information found.

Section 4 - First Aid Measures


Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid imme diately.
Skin: Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion: Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth resuscitation if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures


General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: Use foam, dry chemical, or carbon dioxide.
Flash Point: Not applicable.
Autoignition Temperature: Not applicable.
Explosion Limits, Lower:Not available.
Upper: Not available.
NFPA Rating: (estimated) Health: 3; Flammability: 1; Instability: 1

Section 6 - Accidental Release Measures


General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Wear a self contained breathing apparatus and appropriate personal protection. (See Exposure Controls, Personal Protection section). Avoid generating dusty conditions. Provide ventilation. Do not let this chemical enter the environment.

Section 7 - Handling and Storage


Handling: Minimize dust generation and accumulation. Do not get in eyes, on skin, or on clothing. Do not ingest or inhale. Use only in a chemical fume hood.
Storage: Store in a cool, dry place. Store in a tightly closed container. Corrosives area. Store protected from moisture. Store under an inert atmosphere.

Section 8 - Exposure Controls, Personal Protection


Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use only under a chemical fume hood.
Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
2-Sulfobenzoic acid cyclic anhydride none listed none listed none listed

OSHA Vacated PELs: 2-Sulfobenzoic acid cyclic anhydride: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - Physical and Chemical Properties


Physical State: Solid
Appearance: white to beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate:Not available.
Viscosity: Not available.
Boiling Point: 184 - 186 deg C @ 18 mmHg
Freezing/Melting Point:116 - 127 deg C
Decomposition Temperature:Not available.
Solubility: Not available.
Specific Gravity/Density:Not available.
Molecular Formula:C7H4O4S
Molecular Weight:184.17

Section 10 - Stability and Reactivity


Chemical Stability: Moisture sensitive.
Conditions to Avoid: Incompatible materials, dust generation, exposure to moist air or water.
Incompatibilities with Other Materials: Strong acids, strong bases, strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - Toxicological Information


RTECS#:      
CAS# 81-08-3 unlisted.
LD50/LC50:
Not available.

Carcinogenicity:
CAS# 81-08-3: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information found
Teratogenicity: No information found
Reproductive Effects: No information found
Mutagenicity: No information found
Neurotoxicity: No information found
Other Studies:

Section 12 - Ecological Information


Ecotoxicity: No data available. No information available.
Environmental: No information available.
Physical: No information available.
Other: Do not empty into drains.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

US DOT Canada TDG
Shipping Name: CORROSIVE SOLIDS, TOXIC, N.O.S. CORROSIVE SOLIDS, TOXIC, N.O.S.
Hazard Class: 8 8
UN Number: UN2923 UN2923
Packing Group: II II

Section 15 - Regulatory Information

US FEDERAL

TSCA
     CAS# 81-08-3 is listed on the TSCA inventory.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
     This material does not contain any hazardous air pollutants.
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA.
     None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     CAS# 81-08-3 is not present on state lists from CA, PA, MN, MA, FL, or NJ.

California Prop 65

California No Significant Risk Level: None of the chemicals in this product are listed.

European/International Regulations

European Labeling in Accordance with EC Directives
Hazard Symbols:
     C
Risk Phrases:

     R 20/21/22 Harmful by inhalation, in contact with skin and if
     swallowed.
     R 34 Causes burns.

Safety Phrases:

     S 24/25 Avoid contact with skin and eyes.
     S 36/37/39 Wear suitable protective clothing, gloves and eye/face pr
     otection.
     S 45 In case of accident or if you feel unwell, seek medical advice
     immediately (show the label where possible).

WGK (Water Danger/Protection)

     CAS# 81-08-3: No information available.
Canada - DSL/NDSL
     CAS# 81-08-3 is listed on Canada's NDSL List.
Canada - WHMIS
     This product has a WHMIS classification of D2B.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
Canadian Ingredient Disclosure List

Section 16 - Additional Information

MSDS Creation Date: 5/24/1999
Revision #5 Date: 6/27/2007

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

;

Recommended suppliers

Simagchem Corporation

China (Mainland) Assessed Supplier

High quality 2-Sulfobenzoic anhydride supplier in China

  • Assay:99%
  • Appearance:white-off solid or colorless liquid ( referto COA)
  • Package:25kgs/fiber drum or 200kgs/UN drum
  • Storage:in a cool and dry place
  • Transportation:by sea or by air
  • Application:Fine Intermediate
Contact Supplier

Wuhan Fortuna Chemical Co.,Ltd

China (Mainland) Assessed Supplier

Manufacturer high quality 2-Sulfobenzoic anhydride Cas 81-08-3 with good price

  • Assay:90%min
  • Appearance:Ice-cream white to light gray powder
  • Package:1kg/foil bag;25kg/drum
  • Storage:cool dry place
  • Transportation:by courier/by air/by sea
  • Application:fine chemical
Contact Supplier

Ality Chemical Corporation

China (Mainland) Assessed Supplier

Factory Supply 2-Sulfobenzoic anhydride

  • Assay:99.9%
  • Appearance:Refer to COA
  • Package:drum
  • Storage:keep in cool and dry place
  • Transportation:by sea or by air
  • Application:Intermediates and materials
Contact Supplier

Amadis Chemical Co., Ltd.

China (Mainland) Assessed Supplier

2-[oxo-[oxo-(2-sulfophenyl)methoxy]methyl]benzenesulfonic acid

  • Assay:97%
  • Appearance:Powder or liquid
  • Package:According to customer
  • Storage:Store in a tightly closed container, in a cool and dry place.
  • Transportation:Fedex,DHL,TNT,BY SEA and BY AIR
  • Application:Medicinal Chemistry Biomedicine Pharmaceutical intermediates Chemistry experiment Biological experiments Chemical reagent For R&D use only.
Contact Supplier

Shanghai Seasonsgreen Chemical Co.,Ltd

China (Mainland) Assessed Supplier

2-Sulfobenzoic anhydride

  • Assay:Industrial Grade ,
  • Appearance:white or almost white powder
  • Package:1kg/drum, 25kg/drum, 200kg/drum,500kg/drum
  • Storage:Keep it in dry, cool and ventilated place
  • Transportation:by sea or by air
  • Application:For scientific research
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View