Quaternary ammoniumcompounds, C12-14-alkyl[(ethylphenyl)methyl]dimethyl, chlorides

CORPORATE EXPRESS US, Inc. MSDS #: MSDS SEB6600
1 Environmental Way Hazard Rating HMIS NFPA
2 2
Broomfield, CO 80021 Health
1 1
Business Phone: 1.888.203.5101 Flammability
0 0
24-HR MEDICAL AND DOT EMERGENCIES: 1.888.322.0912 Reactivity
Special None None


MATERIAL SAFETY DATA SHEET
Complies with ANSI Z400.1 Format

SECTION 1: PRODUCT IDENTIFICATION


SE66 Disinfectant SanitizerTM SEB6600.1207
Product: MSDS CODE:
This MSDS applies to SEB6601, Handy Mix?? SEB6604HM and Quick Mix? SEB6602QM

GENERIC DESCRIPTION DATE ISSUED SUPERSEDES PREPARED BY
Disinfectant Sanitizer 12-1-07 None Regulatory Specialist
SECTION 2: COMPOSITION AND INFORMATION ON INGREDIENTS
Components* % by Wt. CAS # Exposure Limit
Alkyl dimethyl benzyl ammonium chloride 5.0 68391-01-5 None
Alkyl dimethyl ethylbenzyl ammonium chloride 5.0 85409-23-0 None
Balance is water and similar non-hazardous ingredients.

NA = Not applicable NSR = No Special Requirements ND = Not Determined PEL = OSHA TLV-TWA = ACGIH

SECTION 3: HAZARD IDENTIFICATION
Primary Entry Routes: Eye, Skin, Inhalation and Ingestion Signs & Symptoms of Exposure: Eyes: This product may be corrosive to
eyes. Repeated or prolonged contact may cause severe irritation, redness, blurred vision, and severe or permanent damage. Skin: This
product may be corrosive to the skin. Inhalation: Exposure via inhalation not likely. High vapor or aerosol mist concentrations may be
irritating to the nose, throat and upper respiratory tract. Ingestion: This product may be harmful if it is swallowed. Ingestion of this
product may cause nausea, vomiting and diarrhea. Effects of Overexposure: None known.

SECTION 4: FIRST AID MEASURES
Emergency First Aid Procedures: Eye Contact: Immediately flush eyes with water for at least 15 minutes while holding eyelids
open. Get medical attention or advice. Skin Contact: Immediately take off all contaminated clothing.Wash contaminated clothing
before reuse. For skin contact, flush with large amounts of water. If irritation persists, get medical attention. Inhalation: If symptoms
are experienced, remove source of contamination or move victim to fresh air. If symptoms persist, get medical attention. If not
breathing, give artificial respiration, preferably mouth-to-mouth. If breathing is difficult, give oxygen. Seek medical attention.
Ingestion: If the material is swallowed, get immediate medical attention or advice. Do not induce vomiting. Notes to Physician If the
product is ingested, probable mucosal damage may contraindicate the use of gastric lavage.

SECTION 5: FIRE FIGHTING MEASURES
Flash Point: Closed cup: >201??F Flammable Limits: ND Extinguishing Media: Dry chemical, foam, carbon dioxide, water fog.
Special Fire Fighting Procedures: Firefighters should wear full fire-fighting turn-out gear (full Bunker gear) including NIOSH-
approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.
Unusual Fire and Explosion Hazards: No special hazards known. Use water spray to cool nearby containers.

SECTION 6: ACCIDENTAL RELEASE MEASURES
Release or Spill: Keep spill out of sewers and open bodies of water.

SECTION 7: HANDLING AND STORAGE
Keep from freezing. Store at temperatures below 140 F. Keep containers closed until used. Do not contaminate drinking water; food or
feed by storage or disposal. Keep out of reach of children.
Corporate Express US, Inc.
Material Safety Data Sheet

SECTION 8: EXPOSURE CONTROLS AND PERSONAL PROTECTION
Respiratory Protection: If vapors are present or irritation is experienced, NIOSH approved respiratory protection for ammoniacal
vapors should be worn.
Protective Gloves: Use of protective coveralls and long sleeves is recommended. Use impervious gloves.
Eye Protection: Wear chemical goggles and face shield.
Other Protective Measures: Use good personal hygiene practices. Launder contaminated clothing/equipment before reuse.

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance/Odor: Clear liquid Boiling Point: >212F Evap. Rate: NA pH: 7.2
Vapor Density: ND Vapor Pressure: NA Specific Gravity: 0.99 Solubility in Water: Complete %Volatile: 90

SECTION 10: STABILITY AND REACTIVITY
Stability: Stable Conditions to Avoid: None known. Incompatibility: None known.
Hazardous Decomposition Products: Thermal decomposition may produce toxic vapors/fumes of hydrogen chloride, amines and other organic
materials, and oxides of carbon and nitrogen. Hazardous Polymerization: Will not occur. Conditions to Avoid: None known.


SECTION 11: TOXICOLOGICAL INFORMATION
Not listed as carcinogenic according to IARC, NTP or OSHA.

SECTION 12: ECOLOGICAL INFORMATION
Ecotoxicity: The ecological toxicity of this product is not known.

SECTION 13: DISPOSAL CONSIDERATIONS
Dike and contain spill with inert material (sand, earth, commercial absorbent, etc.) and transfer to containers for disposal. Rinse area
with water and flush to sanitary sewer. Keep spill out of storm sewers and waterways. Dispose of in compliance with all federal, state
and local laws and regulations.

SECTION 14: TRANSPORT INFORMATION
DOT EMERGENCY 24-HR: 1.888.322.0912 U.S. DOT Hazard Class: 8 PACKING GROUP: III
DOT TECHNICAL NAME: Quaternary Ammonium Compounds
DOT SHIPPING NAME: Corrosive liquid, basic, organic, n.o.s.

SECTION 15: REGULATORY INFORMATION
SARA Title III Section 313 and 40 CFR Part 372 Notification: Ingredients in this product are not currently subject.
No ingredients in this product are currently listed as carcinogens by NTP, IARC or OSHA. All components of this product are listed or are excluded from
listing on the U.S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory. This product is considered a pesticide, and is therefore excluded
from the United States TSCA Regulations. There is no calculable reportable quantity (RQ) for this product.


SECTION 16: OTHER INFORMATION
Always follow label directions carefully when using this or any other chemical product. If information about this product is required,
please contact CORPORATE EXPRESS at 1.888.203.5101 or visit our website at www.corporateexpress.com . Keep MSD Sheets filed
and organized in an area accessible to workers according to the OSHA Hazard Communication Standards.
This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty, express or
implied, as to the accuracy of the information contained herein. Actual conditions of use and handling are beyond sellers control. User is
responsible to evaluate all available information when using product for any particular use and to comply with all Federal, State and
Local laws and regulations.

;

Recommended suppliers

Wuhan Kemi-Works Chemical Co., Ltd

China (Mainland) Assessed Supplier

Disinfectant Alkyl dimethyl ethyl benzyl ammonium chloride EBKC, 85409-23-0/ 68956-79-6

  • Assay:50%, 80%
  • Appearance:Colorless to Light yellow liquid
  • Package: 200KG /plastic drum or 950kg/IBC drum
  • Storage:store in dry and cool place
  • Transportation:By air , by sea , ship it as dangerous goods
  • Application:Also?widely?used?in?disinfectants?for?fruit,?wet?wipes,?air?conditioner,?floor,?table,?fabric,?pipes...etc,.
Contact Supplier

Wuhan Fortuna Chemical Co.,Ltd

China (Mainland) Assessed Supplier

Factory supply C12-14-Alkyldimethyl(ethylbenzyl)ammonium chloride CAS 85409-23-0 with fast delivery

  • Assay:98%,
  • Appearance:Clear Colorless Liquid
  • Package:25kg/drum,200kg/drum
  • Storage:room temp
  • Transportation:By sea /Air / Courier
  • Application:Fine Chemical
Contact Supplier

Ality Chemical Corporation

China (Mainland) Assessed Supplier

Factory Supply Quaternary ammonium compounds, C12-14-alkyl[(ethylphenyl)methyl]dimethyl, chlorides

  • Assay:99.9%
  • Appearance:Refer to COA
  • Package:drum
  • Storage:keep in cool and dry place
  • Transportation:by sea or by air
  • Application:Intermediates and materials
Contact Supplier

EAST CHEMSOURCES LIMITED

China (Mainland) Assessed Supplier

Alkyl(68%C12,32%C14)dimethyl(ethylbenzyl)ammonium chloride

  • Assay:99%
  • Appearance:Colorless to light yellow transparent liquid
  • Package:200kg drum
  • Storage:Shielded from light,dry and placement ,sealed for storage.
  • Transportation:
  • Application:Water treatment chemical
Contact Supplier

Chemwill Asia Co., Ltd.

China (Mainland) Assessed Supplier

C12-14-Alkyldimethylethylbenzylammonium chloride

  • Assay:1,d,
  • Appearance:As per Certificate of analysis and our TDS, MSDS
  • Package:Export standard and according to the clients requirement
  • Storage:Store in dry, dark and ventilated place;ISO / Kosher /GMP licence commercial bulk capacity factory in China
  • Transportation:By AIR or by SEA GMP licence / US-FDA,South Korea-KFDA
  • Application:It is an important raw material and intermediate for chemical industry.
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View