information Related products Suppliers

Alkanes, C11-15-iso-

MATERIAL SAFETY DATA SHEET

1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name WETTING SOLUTION FOR LAPPING KIT
392
MSDS Number
ITW TRANS TECH
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000

2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
ISOPARAFFINIC HYDROCARBON 90622-58-5 80 - 90 %

Composition Comments
Low viscosity organic liquid containing aliphatic hydrocarbons, glycol ether, and surfactants.

3 HAZARDS IDENTIFICATION
Potential Health Effects, Skin
Repeated exposure may cause skin dryness or cracking.

Potential Health Effects, Eye
Contact may result in irritation.

Potential Health Effects, Inhalation
NA

Potential Health Effects, Ingestion
Harmful: may cause lung damage if swallowed.

4 FIRST AID MEASURES
Skin
Wash area thoroughly with soap and water and rinse. Prolonged skin contact may cause skin irritation and/or dermatitis. If
irritation persists or if contact has been prolonged, obtain medical attention.

Eye
Rinse immediately with plenty of water for 10-15 minutes and seek medical advice.

Inhalation
Do not breathe gas/fumes/vapor/spray. May cause dizziness, headache and inebriation. Consult a physician after
significant exposure.

Printed On 17-Mar-05
ND = No Data NA = Not Applicable NI = Not Indicated
392 WETTING SOLUTION FOR LAPPIN
Material Id Trade Name 1/ 4
Ingestion
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention. May cause lung
damage if swallowed.

5 FIRE FIGHTING MEASURES
Hazardous Combustion Products
Fire may cause smoke and oxides of carbon to evolve..

Extinguishing Media
Water spray (fog), foam, dry chemical, or CO2

Not suitable: water jet

Basic Fire Fighting Procedures
Wear self-contained breathing apparatus and protective clothing.
> 62 oC
Flash Point

6 ACCIDENTAL RELEASE MEASURES
Emergency Action
Provide for sufficient ventilation. Remove sources of ignition. Wear protective equipment.

Environmental Precautions
Do not allow material to contaminate ground water system. Prevent product from entering drains.

Spill or Leak Procedure
Soak up with inert absorbent material and dispose of as hazardous waste. Clean with detergents. Avoid solvents. Return
spilled product to approved containers.

7 HANDLING & STORAGE
Handling
Use only with adequate ventilation. Do not eat, drink or smoke in areas of use or storage. Wear personal protective
equipment. Do not breathe vapors or spray mist. Avoid contact with skin and eyes.

Storage
Store in plastic container of HDPE.

Ventilation
Use only with adequate ventilation.

8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Controls
Ensure adequate ventilation, especially in confirmed areas.

Eye Protection: Personal Protection Equipments (PPE)
Wear safety glasses with side shields. Avoid contact with eyes.

Skin Protection: Personal Protection Equipments (PPE)
Handle in accordance with good industrial hygiene and safety practice. Wear a protective apron if splashing or repeated
contact is likely. Pvc or rubber gloves recommended. Protective clothing and footwear may be required to minimize skin
contact. Avoid contact with skin, eyes and clothing.

Printed On 17-Mar-05
ND = No Data NA = Not Applicable NI = Not Indicated
392 WETTING SOLUTION FOR LAPPIN
Material Id Trade Name 2/ 4
Respiratory Protection: Personal Protection Equipments (PPE)
In case of insufficient ventilation wear suitable respiratory equipment. The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.

General
Remove and wash contaminated clothing before reuse. If you feel unwell, seek medical advice (show the label where
possible).

9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Dark blue liquid with slight organic odor.
185 oC
Boiling Point
0.83 kg/Li
Vapor Density
Emulsifies
Solubility In Water

10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable under normal conditions of use.
Conditions to avoid: Spray mist may be flammable at temperatures below the flash point.
Materials to Avoid: Strong acids and oxidizing agents.

Hazardous Reactions/Decomposition Products
Heating can release vapors which can be ignited. Thermal decomposition can lead to release of irritation gases and vapors.

11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Inhalation, ingestion, skin and eye contact.
Prolonged skin contact may cause skin irritation and/or dermatitis.

Toxicological Data
Harmful if swallowed. Inhalation of high vapor concentrations may cause symptoms like headache, dizziness, tiredness,
nausea and vomiting. Contact with eyes or skin causes irritation. May cause sensitization of susceptible persons by skin
contact.

12 ECOLOGICAL INFORMATION
EcoToxicological Information
Ecological injuries are not known or expected under normal use. Product does not contain any organic halogens. Waste
water from subsequent processing should be given appropriate treatment in line with local regulations.

Aquatic Toxicity
The product evaporates readily. Aquatic toxicity is unlikely due to low solubility.

13 DISPOSAL CONSIDERATIONS
Waste Disposal
Can be incinerated, when in compliance with local regulations. Can be biodegraded, by a specialized contractor, when in
compliance with local regulation.

Specific methods: 12 01 07 - mineral-based machining oils free of halogens (except emulsions and solutions) 12 01 20 -
spent grinding bodies and grinding materials containing dangerous substances.

Contaminated packaging: Fully drained containers which are drop- and scrape-free can be treated as industrial waste, and
can possible be recycled.

Printed On 17-Mar-05
ND = No Data NA = Not Applicable NI = Not Indicated
392 WETTING SOLUTION FOR LAPPIN
Material Id Trade Name 3/ 4
14 TRANSPORT INFORMATION
Department of Transportation (DOT) Requirements:
General Transportation Information for Bulk Shipments
Proper Shipping Name Lubricating Fluid

15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 1 Flammability 2 Reactivity 1 Personal Prot. Equip. B

16 OTHER INFORMATION
Disclaimer
The information and recommendations contained herein are believed to be reliable and accurate based on the data
available to us, however we make no warranty, expressed or implied, regarding the accuracy of this data or the results
obtained from the use of this product.

3/17/2005 8/19/2002
Replaces Sheet Dated
Completed On
ITW TRANS TECH
Completed By

Printed On 17-Mar-05
ND = No Data NA = Not Applicable NI = Not Indicated
392 WETTING SOLUTION FOR LAPPIN
Material Id Trade Name 4/ 4

;