information Related products Suppliers

Cyclopentenone

Material Safety Data Sheet
acc. to OSHA and ANSI

1 Identification of substance:
Product details:
Product name: 2-Cyclopentenone
2 Composition/Data on components:
Chemical characterization:
Description: (CAS#)
2-Cyclopentenone (CAS# 930-30-3): 100%
Identification number(s):
EINECS Number: 213-213-0

3 Hazards identification
Hazard description: Not applicable
Information pertaining to particular dangers for man and environment
R 10 Flammable.
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
HEALTH 1 Health (acute effects) = 1
Flammability = 2
FIRE 2
Reactivity = 1
REACTIVITY 1

4 First aid measures
After inhalation
Supply fresh air. If required, provide artificial respiration. Keep
patient warm.
Seek immediate medical advice.
After skin contact
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
After eye contact
Rinse opened eye for several minutes under running water. Then consult a
doctor.
After swallowing Seek immediate medical advice.

Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: 2-Cyclopentenone

5 Fire fighting measures
Suitable extinguishing agents
Carbon dioxide, extinguishing powder or water spray. Fight larger fires
with water spray or alcohol resistant foam.
Special hazards caused by the material, its products of combustion or
resulting gases:
In case of fire, the following can be released:
Carbon monoxide and carbon dioxide
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.

6 Accidental release measures
Person-related safety precautions:
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Keep away from ignition sources
Measures for environmental protection:
Do not allow material to be released to the environment without proper
governmental permits.
Measures for cleaning/collecting:
Absorb with liquid-binding material (sand, diatomite, acid binders,
universal binders, sawdust).
Keep away from ignition sources.
Additional information:
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

7 Handling and storage
Handling
Information for safe handling:
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
Information about protection against explosions and fires:
Keep ignition sources away.
Protect against electrostatic charges.
Fumes can combine with air to form an explosive mixture.
Storage
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Store away from oxidizing agents.
Further information about storage conditions:
Keep container tightly sealed.
Refrigerate

8 Exposure controls and personal protection
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals
and having an average face velocity of at least 100 feet per minute.

Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: 2-Cyclopentenone

Components with limit values that require monitoring at the workplace:
Not required.
Additional information: No data
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures for handling chemicals should be
followed.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Breathing equipment:
Use suitable respiratory protective device in case of insufficient
ventilation.
Use suitable respirator when high concentrations are present.
Protection of hands:
Impervious gloves
Check protective gloves prior to each use for their proper condition.
Material of gloves
The selection of suitable gloves not only depends on the material, but
also on quality. Quality will vary from manufacturer to manufacturer.
Eye protection: Safety glasses
Body protection: Protective work clothing.

9 Physical and chemical properties:
General Information
Form: Liquid
Odor: Not determined
Change in condition
Melting point/Melting range: Not determined
Boiling point/Boiling range: 64-65??C (147-149??F) (19mm Hg)
Sublimation temperature / start: Not determined
Flash point: 42??C (108??F)
Ignition temperature: Not determined
Decomposition temperature: Not determined
Danger of explosion: Product is not explosive. However,
formation of explosive air/vapor
mixtures is possible.
Explosion limits:
Lower: Not determined
Upper: Not determined
Vapor pressure: Not determined
Density at 20??C (68??F): 0.980 g/cm3
Solubility in / Miscibility with
Water: Not determined

Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: 2-Cyclopentenone

10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to
specifications.
Materials to be avoided: Oxidizing agents
Dangerous reactions No dangerous reactions known
Dangerous products of decomposition: Carbon monoxide and carbon dioxide

11 Toxicological information
Acute toxicity:
Primary irritant effect:
on the skin: Irritant to skin and mucous membranes.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
Subacute to chronic toxicity:
Other than potential irritation (see above), no information on illness or
injury to humans from acute or chronic exposure to this product is
available.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this
substance is not fully known.
No classification data on carcinogenic properties of this material is
available from the EPA, IARC, NTP, OSHA or ACGIH.

12 Ecological information:
General notes:
Do not allow material to be released to the environment without proper
governmental permits.

13 Disposal considerations
Product:
Recommendation
Consult state, local or national regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.

14 Transport information
DOT regulations:

Hazard class: 3
Identification number: UN1224
Packing group: III
Proper shipping name (technical
name): KETONES, LIQUID, N.O.S. (2-
Cyclopentenone)

Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: 2-Cyclopentenone

Label 3
Land transport ADR/RID (cross-border)

ADR/RID class: 3 (F1) Flammable liquids
Danger code (Kemler): 30
UN-Number: 1224
Packaging group: III
Description of goods: 1224 KETONES, LIQUID, N.O.S. (2-
Cyclopentenone)
Maritime transport IMDG:

IMDG Class: 3
UN Number: 1224
Label 3
Packaging group: III
Proper shipping name: KETONES, LIQUID, N.O.S. (2-
Cyclopentenone)
Air transport ICAO-TI and IATA-DGR:

ICAO/IATA Class: 3
UN/ID Number: 1224
Label 3
Packaging group: III
Proper shipping name: KETONES, LIQUID, N.O.S. (2-
Cyclopentenone)

15 Regulations
Product related hazard informations:
Risk phrases:
10 Flammable.
Safety phrases:
7 Keep container tightly closed.
33 Take precautionary measures against static discharges.
60 This material and its container must be disposed of as hazardous
waste.

Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: 2-Cyclopentenone

National regulations
This product is not listed in the U.S. Environmental Protection Agency
Toxic Substances Control Act Chemical Substance Inventory. Use of this
product is restricted to research and development only.
Some or all of the components of this product are not listed on the
Canadian Domestic Substances List (DSL) or the Canadian Non-Domestic
Substances List (NDSL).
Information about limitation of use:
For use only by technically qualified individuals.

;