4-Chloro-2-methylphenylmagnesium bromid

1.
1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product identifiers
Product name
Product Number
Brand
:
:
:
4-Chloro-2-methylphenylmagnesium bromide
solution
562262
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Flammable liquids (Category 2)
Skin corrosion (Category 1B)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Highly flammable. Causes burns. Irritating to respiratory system. May form explosive peroxides. Reacts
violently with water.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H225
H314
H335
Precautionary statement(s)
P210
P261
P280
Danger
Highly flammable liquid and vapour.
Causes severe skin burns and eye damage.
May cause respiratory irritation.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Avoid breathing vapours.
Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P305 + P351 + P338
P310
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/ physician.
Supplemental Hazard information (EU)
EUH014
EUH019
Reacts violently with water.
May form explosive peroxides.
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R11
R14
R19
R34
R37
S-phrase(s)
S16
S26
S36/37/39
S45
Highly flammable.
Reacts violently with water.
May form explosive peroxides.
Causes burns.
Irritating to respiratory system.
Keep away from sources of ignition - No smoking.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
2.3
3.
3.2
Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures
Formula
Molecular Weight
:
:
C7H6BrClMg
229,78 g/mol
Component
Tetrahydrofuran
Classification
Concentration
CAS-No.
EC-No.
Index-No.
109-99-9
203-726-8
603-025-00-0
Flam. Liq. 2; Eye Irrit. 2; STOT 50 - 100 %
SE 3; H225, H319, H335,
EUH019
F, Xi, R11 - R19 - R36/37
4-Chloro-2-methylphenylmagnesium bromide
CAS-No.
480438-47-9
Skin Corr. 1B; H314, EUH014
10 - 20 %
C, R14 - R34
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16
4.
4.1
FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
4.2
4.3
5.
5.1
5.2
5.3
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available
FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Dry powder
Special hazards arising from the substance or mixture
Carbon oxides, Hydrogen chloride gas, Hydrogen bromide gas, Magnesium oxide
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
form explosive concentrations. Vapours can accumulate in low areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations (see section 13). Do not flush with water.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
charge.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Never allow product to get in contact with water during storage.
Recommended storage temperature: 2 - 8 ??C
Handle and store under inert gas. Dry residue is explosive.
Specific end uses
no data available
8.
8.1
8.2
9.
9.1
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection
tested and approved under appropriate government standards such as NIOSH (US) or EN
166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type
of protective equipment must be selected according to the concentration and amount of the
dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
e)
f)
g)
h)
Appearance
Odour
Odour Threshold
pH
Melting point/freezing
point
Initial boiling point and
boiling range
Flash point
Evaporation rate
Form: liquid
no data available
no data available
no data available
no data available
65 - 67 ??C
-17 ??C - closed cup
no data available
i)
Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
no data available
no data available
m) Relative density
0,959 g/mL at 25 ??C
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
no data available
no data available
no data available
no data available
no data available
no data available
no data available
9.2
10.
10.1
10.2
10.3
10.4
10.5
10.6
11.
11.1
Other safety information
no data available
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
Reacts violently with water.
Conditions to avoid
Heat, flames and sparks. Extremes of temperature and direct sunlight. Exposure to moisture.
Incompatible materials
Oxidizing agents, Oxygen
Hazardous decomposition products
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. Material is extremely destructive to the tissue of
the mucous membranes and upper respiratory tract. Causes respiratory
tract irritation. Vapours may cause drowsiness and dizziness.
Harmful if swallowed. Causes burns.
May be harmful if absorbed through skin. Causes skin burns.
Causes eye burns.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: Not available
12.
12.1
12.2
12.3
12.4
12.5
12.6
13.
13.1
14.
14.1
ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
company.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN number
14.2
ADR/RID: 2924
UN proper shipping name
IMDG: 2924
IATA: 2924
ADR/RID:
IMDG:
IATA:
FLAMMABLE LIQUID, CORROSIVE, N.O.S. (Tetrahydrofuran, 4-Chloro-2-
methylphenylmagnesium bromide)
FLAMMABLE LIQUID, CORROSIVE, N.O.S. (4-Chloro-2-methylphenylmagnesium bromide,
Tetrahydrofuran)
Flammable liquid, corrosive, n.o.s. (4-Chloro-2-methylphenylmagnesium bromide,
Tetrahydrofuran)
14.3
Transport hazard class(es)
ADR/RID: 3 (8)
14.4
Packaging group
ADR/RID: II
IMDG: 3 (8)
IMDG: II
IATA: 3 (8)
IATA: II
14.5
Environmental hazards
14.6
15.
ADR/RID: no
Special precautions for user
no data available
REGULATORY INFORMATION
IMDG Marine pollutant: no
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
16.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
OTHER INFORMATION
Text of H-code(s) and R-phrase(s) mentioned in Section 3
EUH014
EUH019
Eye Irrit.
Flam. Liq.
H225
H314
H319
H335
Skin Corr.
STOT SE
C
F
R11
R14
R19
R34
R36/37
Xi
Reacts violently with water.
May form explosive peroxides.
Eye irritation
Flammable liquids
Highly flammable liquid and vapour.
Causes severe skin burns and eye damage.
Causes serious eye irritation.
May cause respiratory irritation.
Skin corrosion
Specific target organ toxicity - single exposure
Corrosive
Highly flammable
Highly flammable.
Reacts violently with water.
May form explosive peroxides.
Causes burns.
Irritating to eyes and respiratory system.
Irritant
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.

;

Recommended suppliers

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

4-Chloro-2-methylphenylmagnesium bromid Manufacturer/High quality/Best price/In stock

  • Assay:Industrial Grade,
  • Appearance:detailed see specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by sea or by air
  • Application:It is an important raw material and intermediate used in Organic Synthesis, Pharmaceuticals, Agrochemicals and Dyestuff.
Contact Supplier

Hebei yanxi chemical co.,LTD.

China (Mainland) Assessed Supplier

4-CHLORO-2-METHYLPHENYLMAGNESIUM bromide

  • Assay:1,
  • Appearance:
  • Package:25kg\bucket
  • Storage:Ventilated, dry and cool
  • Transportation:shipping
  • Application:Used as pharmaceutical intermediates, caffeine and vitamin B, as well as raw materials for oil soluble colorants and 502 adhesives for color film.
Contact Supplier

HANGZHOU TIANYE CHEMICALS CO., LTD.

China (Mainland) Assessed Supplier

4-CHLORO-2-METHYLPHENYLMAGNESIUM BROMID

  • Assay:99%
  • Appearance:
  • Package:drum
  • Storage: 2-8°C
  • Transportation:according to your demand
  • Application:Chemical intermediate
Contact Supplier

HENAN NEW BLUE CHEMICAL CO.,LTD

China (Mainland) Assessed Supplier

480438-47-9

  • Assay:1,
  • Appearance:White powder
  • Package:25KGS/Drum
  • Storage:Room temperature
  • Transportation:BY SEA
  • Application:API,Pharmaceutical intermediates
Contact Supplier

Zhuozhou Wenxi import and Export Co., Ltd

China (Mainland) Assessed Supplier

Manufacturer supply CAS 480438-47-9 with best quality

  • Assay:98%,99%,
  • Appearance:White powder
  • Package: [Packaging]20mg, 50mg,100mg,1g,10g,100g,according to customers' requirements
  • Storage: should be stored in a well-closed container at low temperature, keep away from moisture, heat and light.
  • Transportation:1. Samples 1kg-10kg are shipped by international express. 2. 50kg-100kg of goods are transported by dedicated line logistics. 3. Cargo 100kg-1ton is transported by dedicated line logistics.
  • Application:Chemical raw materials, pharmaceutical intermediates, cosmetic raw materials, etc.
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View