2-butylcyclohexan-1-ol

1.IDENTIFICATIONOFTHESUBSTANCE/MIXTUREANDOFTHECOMPANY/UNDERTAKING
Product Name
2-BUTYLCYCLOHEXANOL (MIXTURE OF ISOMERS)
2.HAZARDS IDENTIFICATION
Classification of the substance or mixture
According to Regulation (EC) No1272/2008
Skin irritation (Category 2)
Serious eye damage (Category 1)
Specific target organ toxicity - single exposure (Category 3)
According to European Directive 67/548/EEC as amended.
Irritating to respiratory system and skin. Risk of serious damage to eyes. Toxic to aquatic organisms, may
cause long-term adverse effects in the aquatic environment.
Label elements
Pictogram
Signal word
Hazard statement(s)
H315
H318
H335
Precautionary statement(s)
P261
P280
P305 + P351 + P338
Danger
Causes skin irritation.
Causes serious eye damage.
May cause respiratory irritation.
Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
Wear protective gloves/ eye protection/ face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Hazard symbol(s)
Xi
N
R-phrase(s)
R37/38
R41
R51/53
Irritant
Dangerous for the environment
Irritating to respiratory system and skin.
Risk of serious damage to eyes.
Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
S-phrase(s)
S26
S39
S61
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear eye/face protection.
Avoid release to the environment. Refer to special instructions/ Safety data
sheets.
Other hazards - none
3. COMPOSITION/INFORMATION ON INGREDIENTS
Formula
Molecular Weight
:
:
C10H20O
156,27 g/mol
CAS-No.
EC-No.
Index-No.
Classification
Concentration
2-BUTYLCYCLOHEXANOL (MIXTURE OF ISOMERS)
36159-49-6
-
-
Skin Irrit. 2; Eye Dam. 1;
-
STOT SE 3; H315, H318,
H335
Xi, N, R37/38 - R41 - R51/53
For the full text of the H-Statements mentioned in this Section, see Section 16.
4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Normal measures for preventive fire protection.
Conditions for safe storage
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with
multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Hand protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without
touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves
after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Eye protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and
approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin and body protection
Complete suit protecting against chemicals, The type of protective equipment must be selected according
to the concentration and amount of the dangerous substance at the specific workplace.
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Form
Safety data
pH
Melting point
Boiling point
Flash point
Ignition temperature
Lower explosion limit
Upper explosion limit
Water solubility
Partition coefficient:
liquid
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
log Pow: 3,593
n-octanol/water
10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Conditions to avoid
no data available
Materials to avoid
Strong oxidizing agents
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides
11. TOXICOLOGICAL INFORMATION
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. Causes respiratory tract irritation.
May be harmful if swallowed.
May be harmful if absorbed through skin. Causes skin irritation.
Causes eye burns.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Additional Information
RTECS: Not available
12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
PBT and vPvB assessment
no data available
Other adverse effects
Toxic to aquatic life.
no data available
13. DISPOSAL CONSIDERATIONS
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional
waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.
14. TRANSPORT INFORMATION
ADR/RID
UN-Number: 3082 Class: 9
Packing group: III
Proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2-
BUTYLCYCLOHEXANOL (MIXTURE OF ISOMERS))
IMDG
UN-Number: 3082 Class: 9
Packing group: III
EMS-No: F-A, S-F
Proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2-
BUTYLCYCLOHEXANOL (MIXTURE OF ISOMERS))
Marine pollutant: Marine pollutant
IATA
UN-Number: 3082 Class: 9
Packing group: III
Proper shipping name: Environmentally hazardous substance, liquid, n.o.s. (2-BUTYLCYCLOHEXANOL
(MIXTURE OF ISOMERS))
Further information
EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and combination packagings
containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids.
15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
16. OTHER INFORMATION
Text of H-code(s) and R-phrase(s) mentioned in Section 3
Eye Dam.
H315
H318
H335
Skin Irrit.
STOT SE
N
Xi
R37/38
R41
R51/53
Serious eye damage
Causes skin irritation.
Causes serious eye damage.
May cause respiratory irritation.
Skin irritation
Specific target organ toxicity - single exposure
Dangerous for the environment
Irritant
Irritating to respiratory system and skin.
Risk of serious damage to eyes.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.

;

Recommended suppliers

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

2-butylcyclohexan-1-ol

  • Assay:Industrial Grade,
  • Appearance:detailed see specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by air or by sea
  • Application:Used in Synthesis, Pharmaceuticals and other fields
Contact Supplier

HENAN NEW BLUE CHEMICAL CO.,LTD

China (Mainland) Assessed Supplier

36159-49-6 (2-BUTYLCYCLOHEXANOL )

  • Assay:99%
  • Appearance:Solid
  • Package:as clients needs
  • Storage:In Room Temperature
  • Transportation:by courier by sea
  • Application:Organic Chemicals
Contact Supplier

Chemlyte Solutions

China (Mainland) Assessed Supplier

2-butylcyclohexan-1-ol

  • Assay:99.0,
  • Appearance:liquid
  • Package:Grams, Kilograms
  • Storage:Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
  • Transportation:According to customer request
  • Application:For R&D and commerical use
Contact Supplier

weifang yangxu group co.,ltd

China (Mainland) Assessed Supplier

2-BUTYLCYCLOHEXANOL

  • Assay:99.9,
  • Appearance:
  • Package:box or opp package
  • Storage:cool drum
  • Transportation:air or sea
  • Application:2-BUTYLCYCLOHEXANOL
Contact Supplier

Kono Chem Co.,Ltd

China (Mainland) Assessed Supplier

2-butylcyclohexanol

  • Assay:99%
  • Appearance:solid or liquid
  • Package:drum and bag
  • Storage:in sealed air resistant place
  • Transportation:by sea or air
  • Application:for pharma use
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View