information Related products Suppliers

Distillates(petroleum), solvent-refined middle

Material Safety Data Sheet CS: 1.4.22

1 of 4

NIX1P Issue Date :April 2008
Infosafe No?? ISSUED by MOTORONE CS: 1.4.22

Product Name :M1 AUTOMATIC TRANSMISSION FLUSH

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIE M1 AUTOMATIC TRANSMISSION FLUSH
Product Name
MotorOne Group Pty Ltd
Company Name
Address 275 Canterbury Road Canterbury
VIC 3126 Australia
Tel: (03) 8809 2700
Telephone/Fax
Fax: (03) 9888 6944
Number
Recommended Use An advanced chemical formulation helping to remove contaminants, and lubricate
automatic transmission components - liquid addition to lubricating oil.
2. HAZARDS IDENTIFICATION
NON-DANGEROUS GOODS.
Hazard
HAZARD CLASSIFICATION NOT DETERMINED.
Classification
Dangerous goods classification according to the Australian Dangerous Goods
Code.
Hazard classification according to the criteria of NOHSC.
Risk Phrase(s) R45(2) May cause cancer.
R68(M3) Possible risk of irreversible effects.
Safety Phrase(s) S23 Do not breathe gas/fumes/vapour/spray
S36/37 Wear suitable protective clothing and gloves.
S53 Avoid exposure - obtain special instructions before use.
S61 Avoid release to the environment. Refer to special instructions/safety
data sheet.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name CAS Proportion
Ingredients
64742-01-4 30-60 %
Paraffinic Lube
oil
64741-91-9 10-30 %
Paraffinic Lube
oil
Trichloroethylene 79-01-6 10-<20 %
- -
Ingredients
determined not to
be hazardous
4. FIRST AID MEASURES
Inhalation If inhaled, remove from contaminated area. Apply artificial respiration if not
breathing. Do not give direct mouth-to-mouth resuscitation. To protect
rescuer, use air-viva, oxy-viva or one-way mask. Resuscitate in a
well-ventilated area. If symptoms develop seek medical attention.
Ingestion Do NOT induce vomiting. Wash out mouth with water. If symptoms develop seek
medical attention.
Skin Wash affected area extremely thoroughly with soap and water. Remove
contaminated clothing and wash before reuse or discard. If symptoms develop
seek medical attention.
Eye If contact with the eye(s) occurs, wash with copious amounts of water holding
eyelid(s) open. Take care not to rinse contaminated water into the
non-affected eye. If symptoms persist seek medical attention.
Eye wash station, safety shower and normal washroom facilities.
First Aid Facilities
Treat symptomatically.
Advice to Doctor
For advice, contact a Poisons Information Centre (Phone eg Australia 131 126).
Other Information

5. FIRE FIGHTING MEASURES
Foam, carbon dioxide or dry chemical.
Suitable
Extinguishing Media
Under fire conditions this product may emit toxic and/or irritating fumes.
Hazards from
Combustion
Products

Print Date: 24/06/2008 CS: 1.4.22
Material Safety Data Sheet CS: 1.4.22

2 of 4

NIX1P Issue Date :April 2008
Infosafe No?? ISSUED by MOTORONE CS: 1.4.22

Product Name :M1 AUTOMATIC TRANSMISSION FLUSH

Fire-fighters should wear full protective clothing and self contained
Precautions in
breathing apparatus (SCBA) operated in positive pressure mode.
connection with Fire
6. ACCIDENTAL RELEASE MEASURES
Wear appropriate personal protective equipment and clothing to avoid exposure.
Emergency
Extinguish or remove all sources of ignition and stop leak if safe to do so.
Procedures
Increase ventilation. Evacuate all unnecessary personnel. If possible contain
the spill. Place inert absorbent material onto spillage. Use clean
non-sparking tools to collect the material and place into a suitable labelled
container. Do not dilute material but contain. Dispose of waste according to
federal, Environmental Protection Authority and state regulations. If the
spillage enters the waterways contact the Environmental Protection Authority,
or your local Waste Management Authority.
7. HANDLING AND STORAGE
Wear suitable protective equipment. Exposure without protection should be
Precautions for Safe
prevented in order to lessen the possibility of skin disorders. It is
Handling
essential that all who come into contact with this material maintain high
standards of personal hygiene ie. Washing hands prior to eating, drinking,
smoking or using toilet facilities.
Store in a cool, dry well-ventilated area away from heat, sources of ignition,
Conditions for Safe
oxidising agents, foodstuffs, and clothing and out of direct sunlight. Prevent
Storage
any contact with water or moisture. Keep containers closed when not in use and
securely sealed and protected against physical damage. Inspect regularly for
deficiencies such as damage or leaks. Do NOT pressurise, cut, heat or weld
containers as they may contain hazardous residues.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Name TWA
STEL
National Exposure
Standards
mg/m3 ppm mg/m3 ppm Footnote
Trichloroethylene 1080 200 270 50
No Biological limit available.
Biological Limit
Values
As published by the National Occupational Health and Safety Commission
Other Exposure
(NOHSC):
Information
TWA - the Time-Weighted Average airborne concentration over an eight-hour
working day, for a five-day working week over an entire working life.
STEL (Short Term Exposure Limit) - the average airborne concentration over a
15 minute period which should not be exceeded at any time during a normal
eight-hour workday.
According to current knowledge these concentrations should neither impair the
health of, nor cause undue discomfort to, nearly all workers.
Use with good general ventilation. If mists or vapours are produced local
Engineering
exhaust ventilation should be used.
Controls
If engineering controls are not effective in controlling airborne exposure
Respiratory
then respiratory protective equipment should be used suitable for protecting
Protection
against airborne contaminants. Type of breathing protection required will vary
according to individual circumstances. Expert advice may be required to make
this decision. Reference should be made to Australian Standards AS/NZS 1715,
Selection, Use and maintenance of Respiratory Protective Devices; and AS/NZS
1716, Respiratory Protective Devices.
Eye Protection Safety glasses with side shields, goggles or full-face shield as appropriate
recommended. Final choice of appropriate eye/face protection will vary
according to individual circumstances i.e. methods of handling or engineering
controls and according to risk assessments undertaken. Eye protection should
conform with Australian/New Zealand Standard AS/NZS 1337 - Eye Protectors for
Industrial Applications.
Hand Protection Wear gloves of impervious material. Final choice of appropriate gloves will
vary according to individual circumstances i.e. methods of handling or
according to risk assessments undertaken. Reference should be made to AS/NZS
2161.1: Occupational protective gloves - Selection, use and maintenance.
Body Protection Suitable work wear should be worn to protect personal clothing, eg cotton

Print Date: 24/06/2008 CS: 1.4.22
Material Safety Data Sheet CS: 1.4.22

3 of 4

NIX1P Issue Date :April 2008
Infosafe No?? ISSUED by MOTORONE CS: 1.4.22

Product Name :M1 AUTOMATIC TRANSMISSION FLUSH

overalls buttoned at neck and wrist. When large quantities are handled the use
of plastic aprons and rubber boots is recommended. Industrial clothing should
conform to the specifications detailed in AS/NZS 2919: Industrial clothing.
9. PHYSICAL AND CHEMICAL PROPERTIES
Straw coloured - light viscosity.
Appearance
Low odour, slightly sweet, ethereal odour.
Odour
Not applicable.
Melting Point
Not applicable.
Boiling Point
Insoluble
Solubility in Water
0.98 (water = 1)
Specific Gravity
Not available.
pH Value
Not available.
Vapour Pressure
> 1.0
Vapour Density
(Air=1)
< 20%
Volatile Component
Not available.
Flash Point
Combustible.
Flammability
Not available.
Flammable Limits -
Lower
Not available.
Flammable Limits -
Upper
10. STABILITY AND REACTIVITY
Stable under normal conditions.
Chemical Stability
Extremes of temperature and direct sunlight.
Conditions to Avoid
Strong oxidising agents.
Incompatible
Materials
Thermal decomposition may result in the release of toxic and/or irritating
Hazardous
fumes including hydrogen chloride.
Decomposition
Products
Will not occur.
Hazardous
Polymerization
11. TOXICOLOGICAL INFORMATION
No toxicity data available for this product.
Toxicology
Information
Inhalation Inhalation of product vapours may cause irritation of the nose, throat and
respiratory system.
Ingestion Ingestion of this product may irritate the gastric tract causing nausea and
vomiting.
May cause redness, itching and irritation.
Skin
May cause eye irritation, tearing, stinging, blurred vision, and redness.
Eye
Not available.
Chronic Effects
Mutagen Category 3, possible risk of irreversible effects.
Mutagenicity
Carcinogenicity Trichloroethylene has been classified as a Category 2 Carcinogen according to
the National Occupational Health and Safety Commission (NOHSC). That is, there
is sufficient evidence, on the basis of appropriate long term animal studies
or other relevant information, to provide a strong presumption that human
exposure to the substance may result in the development of cancer.
12. ECOLOGICAL INFORMATION
No data is available for this material.
Ecotoxicity

Print Date: 24/06/2008 CS: 1.4.22
Material Safety Data Sheet CS: 1.4.22

4 of 4

NIX1P Issue Date :April 2008
Infosafe No?? ISSUED by MOTORONE CS: 1.4.22

Product Name :M1 AUTOMATIC TRANSMISSION FLUSH

Not available.
Persistence /
Degradability
Not available.
Mobility
Do not allow product to enter drains, waterways or sewers.
Environ. Protection

13. DISPOSAL CONSIDERATIONS
Dispose of waste according to federal, EPA and state regulations.
Disposal
Considerations
14. TRANSPORT INFORMATION
Not classified as Dangerous Goods, according to the Australian Code for the
Transport
Transport of Dangerous Goods by Road and Rail.
Information
15. REGULATORY INFORMATION
S6
Poisons Schedule
Toxic
Hazard Category

16. OTHER INFORMATION
MSDS Reviewed: April 2008
Date of preparation
MSDS Created: December 2002
or last revision of
MSDS
Contact Person/Point DISCLAIMER: The company has taken care in compiling this information. No
liability is accepted whether direct or indirect from its application since
the conditions of final use are outside the Company's control. The end user
is obliged to conform to relevant government regulations and/or patent laws
applicable in their respective States of Countries.
...End Of MSDS...
? Copyright ACOHS Pty Ltd
Copyright in the source code of the HTML, PDF, XML, XFO and any other electronic files rendered by an Infosafe system for Infosafe MSDS displayed on this site is the
intellectual property of Acohs Pty Ltd.
Copyright in the layout, presentation and appearance of each Infosafe MSDS displayed on this site is the intellectual property of Acohs Pty Ltd.
The compilation of MSDS's displayed on this site is the intellectual property of Acohs Pty Ltd.
Copying of any MSDS displayed on this site is permitted for personal use only and otherwise is not permitted. In particular the MSDS's displayed on this site cannot be

Print Date: 24/06/2008 CS: 1.4.22

;