Benzene,1,2,3,4,5-pentafluoro-6-(1,1,2,3,3-pentafluoro-2-propen-1-yl)-

Material Safety Data Sheet
acc. to OSHA and ANSI

1 Identification of substance:
Product details:
Product name: Perfluoroallylbenzene
2 Composition/Data on components:
Chemical characterization:
Description: (CAS#)
Perfluoroallylbenzene (CAS# 67899-41-6); 100%

3 Hazards identification
Hazard description:


Xi Irritant


Information pertaining to particular dangers for man and environment
R 36/37/38 Irritating to eyes, respiratory system and skin.
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
HEALTH 1 Health (acute effects) = 1
Flammability = 0
FIRE 0
Reactivity = 1
REACTIVITY 1




4 First aid measures
After inhalation
Supply fresh air. If required, provide artificial respiration. Keep
patient warm.
Seek immediate medical advice.
After skin contact
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
After eye contact
Rinse opened eye for several minutes under running water. Then consult a
doctor.
After swallowing Seek immediate medical advice.




D Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: Perfluoroallylbenzene


5 Fire fighting measures
Suitable extinguishing agents
Use carbon dioxide, extinguishing powder or foam. Water may be
ineffective but may be used for cooling exposed containers.
Special hazards caused by the material, its products of combustion or
resulting gases:
In case of fire, the following can be released:
Carbon monoxide and carbon dioxide
Hydrogen fluoride (HF)
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.

6 Accidental release measures
Person-related safety precautions:
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Measures for environmental protection:
Do not allow material to be released to the environment without proper
governmental permits.
Measures for cleaning/collecting:
Absorb with liquid-binding material (sand, diatomite, acid binders,
universal binders, sawdust).
Ensure adequate ventilation.
Additional information:
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

7 Handling and storage
Handling
Information for safe handling:
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
Information about protection against explosions and fires:
No information known.
Storage
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Store away from oxidizing agents.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.

8 Exposure controls and personal protection
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals
and having an average face velocity of at least 100 feet per minute.
Components with limit values that require monitoring at the workplace:
Not required.
Additional information: No data


D Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: Perfluoroallylbenzene


Personal protective equipment
General protective and hygienic measures
The usual precautionary measures for handling chemicals should be
followed.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Breathing equipment:
Use suitable respirator when high concentrations are present.
Protection of hands: Impervious gloves
Eye protection: Safety glasses
Body protection: Protective work clothing.

9 Physical and chemical properties:
General Information
Form: Fluid
Odor: Not determined
Change in condition
Melting point/Melting range: Not determined
Boiling point/Boiling range: Not determined
Sublimation temperature / start: Not determined
Flash point: Not applicable
Not determined
Ignition temperature: Not determined
Decomposition temperature: Not determined
Danger of explosion: Product does not present an
explosion hazard.
Explosion limits:
Lower: Not determined
Upper: Not determined
Vapor pressure: Not determined
Density at 20??C (68??F): 1.708 g/cm3
Solubility in / Miscibility with
Water: Not determined


10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to
specifications.
Materials to be avoided: Oxidizing agents
Dangerous reactions No dangerous reactions known
Dangerous products of decomposition:
Carbon monoxide and carbon dioxide
Hydrogen fluoride




D Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: Perfluoroallylbenzene


11 Toxicological information
Acute toxicity:
Primary irritant effect:
on the skin: Irritant to skin and mucous membranes.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
Subacute to chronic toxicity:
Other than potential irritation (see above), no information on illness or
injury to humans from acute or chronic exposure to this product is
available.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this
substance is not fully known.
No classification data on carcinogenic properties of this material is
available from the EPA, IARC, NTP, OSHA or ACGIH.

12 Ecological information:
General notes:
Do not allow material to be released to the environment without proper
governmental permits.

13 Disposal considerations
Product:
Recommendation
Consult state, local or national regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.

14 Transport information
Not a hazardous material for transportation.
DOT regulations:
Hazard class: None
Land transport ADR/RID (cross-border)
ADR/RID class: None
Maritime transport IMDG:
IMDG Class: None
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: None

Transport/Additional information:
Not dangerous according to the above specifications.

15 Regulations
Product related hazard informations:
Hazard symbols:
Xi Irritant




D Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: Perfluoroallylbenzene


Risk phrases:
36/37/38 Irritating to eyes, respiratory system and skin.
National regulations
This product is not listed in the U.S. Environmental Protection Agency
Toxic Substances Control Act Chemical Substance Inventory. Use of this
product is restricted to research and development only.
Information about limitation of use:
For use only by technically qualified individuals.


;

Recommended suppliers

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

Perfluoroallylbenzene

  • Assay:Industrial Grade,
  • Appearance:detailed in specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by air or by ocean shipping
  • Application:An important raw material and intermediate used in Organic Synthesis, Pharmaceuticals
Contact Supplier

Henan Allgreen Chemical Co.,Ltd

China (Mainland) Assessed Supplier

3-(Pentafluorophenyl)pentafluoro-1-propene

  • Assay:98%
  • Appearance:White or off-white Solid
  • Package:According to the demand of customer
  • Storage:Sealed, dry, microtherm , avoid light and smell.
  • Transportation:by air or by sea
  • Application:Organic synthesis
Contact Supplier

Chemwill Asia Co., Ltd.

China (Mainland) Assessed Supplier

3-(Pentafluorophenyl)-pentafluoro-1-propene

  • Assay:1,d,
  • Appearance:As per Certificate of analysis and our TDS, MSDS
  • Package:Export standard and according to the clients requirement
  • Storage:Store in dry, dark and ventilated place;ISO / Kosher /GMP licence commercial bulk capacity factory in China
  • Transportation:By AIR or by SEA GMP licence / US-FDA,South Korea-KFDA
  • Application:It is an important raw material and intermediate for chemical industry.
Contact Supplier

Zhuozhou Wenxi import and Export Co., Ltd

China (Mainland) Assessed Supplier

Pharmaceutical Grade CAS 67899-41-6 with competitive price

  • Assay:98%,99%,
  • Appearance:White powder
  • Package: [Packaging]20mg, 50mg,100mg,1g,10g,100g,according to customers' requirements
  • Storage: should be stored in a well-closed container at low temperature, keep away from moisture, heat and light.
  • Transportation:1. Samples 1kg-10kg are shipped by international express. 2. 50kg-100kg of goods are transported by dedicated line logistics. 3. Cargo 100kg-1ton is transported by dedicated line logistics.
  • Application:Chemical raw materials, pharmaceutical intermediates, cosmetic raw materials, etc.
Contact Supplier

Ality Chemical Corporation

China (Mainland) Assessed Supplier

Factory Supply 3-(pentafluorophenyl)pentafluoroprop-1-ene

  • Assay:99%
  • Appearance:powder or granule ( refer to COA)
  • Package:25kgs/fiber drum
  • Storage:Keep in a cool & dry place
  • Transportation:by sea or by air
  • Application:Librium, Valium
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View