Sulfuric acid,mono-C12-18-alkyl esters, sodium salts

MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF SUBSTANCE/PREPARATION & COMPANY.
Product name: Tensopol USP94
Chemical names: Sodium Alkyl Sulphate: Sodium Lauryl Sulphate: Sodium C12-C18 Alkyl Sulphate.
Mean Molecular Weight: 303
Formula: CH3 - (CH2)n - OSO3Na
Product code: SLSP
SUPPLIER: The Soap Kitchen, 11a South Street, Torrington, Devon, EX38 8AA.
Emergency Tel No: 01805 622944 Emergency Contact: Mr. Richard Phillips.

2. COMPOSITION / INFORMATION ON INGREDIENTS.
Definition/Botanical Origin:
H-No: CAS No: 68955-19-1 Status:
CoE No: FEMA: Additives:
FDA: IFRA: Application: Cosmetics, skin care.
RIFM: EINECS: 271-557-7 RTECS:
INCI name: Sodium Lauryl Sulphate FCCIV:
Labelling Information: IRRITANT: R38 Irritating to skin: R41 Risk of serious damage to eyes.

3. HAZARDS IDENTIFICATION:
Physico-chemical Effects: Dust from this product may be capable of igniting and propagating a
flame.
Health Effects: Inhalation. May cause irritation of the nose, throat and respiratory tract.
Health Effects: Ingestion. Low order of acute oral toxicity.
Health Effects: Skin. May cause significant skin irritation. Signs and symptoms include
redness and/or itching of the skin.
Health Effects: Eyes. May cause severe damage to the eyes accompanied by redness
and/or burning which may be severe with tear formation.
Environmental Effects: Not expected to cause significant environmental impact.

4. FIRST-AID MEASURES:
INHALATION: Remove from exposure. Keep warm and at rest. Seek medical
Attention if you feel unwell.
EYE CONTACT: Immediately flood the eye with plenty of water for at least 15 minutes,
holding the eye open. Obtain medical attention urgently.
SKIN CONTACT: Wash skin thoroughly with water. Remove contaminated clothing as
washing proceeds. Obtain medical attention if blistering occurs or
redness persists.
INGESTION: Wash out mouth with water. Keep warm and at rest. Seek medical
attention.
ADVICE TO PHYSICIAN: Treat symptomatically.




PDF created with pdfFactory trial version www.pdffactory.com
5. FIRE FIGHTING MEASURES.
EXTINGUISHING MEDIA Use water spray, CO2, Dry Powder or Foam type Extinguishers.
Avoid using large quantities of water.
RECOMMENDED:
SPECIAL MEASURES: Fumes containing CO2 and CO4 and Sulphur Dioxide may be formed in
large fires. May make floor very slippery. Dust from this product may be
capable of igniting and propagating a flame.
EXTINGUISHING PROCEDURES: Wear self-contained breathing apparatus.

6. ACCIDENTAL RELEASE MEASURES.
PERSONAL PRECAUTIONS: Avoid contact with skin eyes and clothes. Wear personal protective
equipment (see section 8). Wear respiratory protection. Material can be
slippery underfoot.
ENVIRONMENT PRECAUTIONS: Keep away from drains, soils, surface & groundwaters.
SPILLAGES: Wearing personal protective equipment, transfer material into a
container for recovery. If recovery is not possible, dispose of through
an approved waste disposal facility according to local laws and
regulations. Avoid creating a dust.

7. HANDLING & STORAGE.
PRECAUTIONS IN HANDLING: Use in well ventilated areas. Avoid creating dust. Avoid inhaling dust.
Avoid contact with eyes, skin and clothing.
STORAGE CONDITIONS: Store in tightly closed original container when not in use.
FIRE PROTECTION: Keep away from ignition sources & naked flames. Store according to
hazard classification. Storage area should be cool and dry.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION.
RESPIRATORY PROTECTION: Facemask with suitable filter or powered respirator.
HAND PROTECTION: PVC gauntlets.
EYE PROTECTION: Full face visor.
BODY PROTECTION: Protective overalls and safety shoes/boots.

9. PHYSICAL & CHEMICAL PROPERTIES.
COLOUR: White
APPEARANCE: Powder
ODOUR: Fatty
SOLUBILITY IN WATER: (20 degC) ca.250 g/l
DENSITY (KG/M3): ca. 320

10. STABILITY & REACTIVITY.
REACTIVITY: Stable under normal conditions. Hydrolised by strong acids. May react
with strong oxidants. If pH falls an exothermic reaction may occur
releasing sulphuric acid. Dust from this product may be capable of
igniting and propagating a flame.
MATERIALS TO AVOID: Acids: Strong oxidising agents: Hazardous decomposition products.
Combustion will generate oxides of carbon and oxides of sulphur.




PDF created with pdfFactory trial version www.pdffactory.com
11. TOXICOLOGICAL INFORMATION.
TOXICOLOGICAL OVERVIEW: The following assessment is based upon data generated by CESIO -
the European Surfactants Association.
ACUTE TOXICITY: Oral: Low order of acute toxicity.
IRRITATION - INHALATION: May cause irritation to the nose, throat and respiratory tract.
IRRITATION - SKIN: This material is irritant to the skin.
IRRITATION - EYES: Expected to cause serious damage to the eye (possible irreversible).

12. ECOLOGICAL INFORMATION.
BIODEGRADABILITY: Readily biodegradable.
MOBILITY: This product will dissolve in water.
ECOTOXICITY: This product is toxic to aquatic organisms.
BIO-ACCUMULATION: This product is surface active; Log Pow inappropriate.

13. DISPOSAL CONSIDERATIONS.
Avoid contact with eyes, skin and inhalation. See section 8 for personal protective equipment. Where
practical, waste or surplus should be recovered and recycled. Do not wash into drains. Do not mix with
other waste materials. Dispose of in accordance with local and national regulations. Seek advice from
local waste authority. Dispose of containers with care. Containers should not be treated as household
waste.

14. TRANSPORT REGULATIONS.
Road (ADR/RID): n/a
SEA (IMDG): n/a
AIR (IATA): n/a
CHIP: See section 15




15. REGULATORY INFORMATION. According to Directive 88/379/EEC
HAZARDS: Irritant


SYMBOLS:
RISK PHRASES: R38 Irritating to skin: R41 Risk of serious damage to eyes.
SAFETY PHRASES: S22 Do not breathe dust: S26 In case of contact with eyes, rinse
immediately with plenty of water and seek medical advice: ??39 Wear
eye/face protection.

16. OTHER INFORMATION.
This product is classified on the basis of information compiled by CESIO on the toxicological properties
of surfactants.
The uses of this product include: Surfactants. Cleaning, washing agents. Toiletries. Dispersion agents.
Foaming agents. Wetting agents.

PACKAGING:


SHELF LIFE




PDF created with pdfFactory trial version www.pdffactory.com
Q.C. REQUIREMENTS.

The data provided in this material safety data sheet is meant to represent typical data/analysis for this
product and is correct to the best of our knowledge. The data was obtained from current and reliable
sources, but is supplied without warranty, expressed or implied, regarding its?? correctness or accuracy.
It is the user's responsibility to determine safe conditions for the use of this product, and to assume
liability for loss, injury, damage or expense arising from improper use of this product. The information
provided does not constitute a contract to supply to any specification, or for any given application, and
buyers should seek to verify their requirements and product use.




PDF created with pdfFactory trial version www.pdffactory.com

;

Recommended suppliers

GIHI CHEMICALS CO.,LIMITED

China (Mainland) Assessed Supplier

Sulfuric acid, mono-C12-18-alkyl esters, sodium salts

  • Assay:Pharmaceutical grade,
  • Appearance:Powder
  • Package:According to customer requirements
  • Storage:dry and cool
  • Transportation:Air and sea transportation
  • Application:Pharmaceutical Industry
Contact Supplier

Ality Chemical Corporation

China (Mainland) Assessed Supplier

Factory Supply Sulfuric acid, mono-C12-18-alkyl esters, sodium salts

  • Assay:99.9%
  • Appearance:Refer to COA
  • Package:drum
  • Storage:keep in cool and dry place
  • Transportation:by sea or by air
  • Application:Intermediates and materials
Contact Supplier

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

Sulfuric acid, mono-C12-18-alkyl esters, sodium salts

  • Assay:Industrial Grade,
  • Appearance:detailed see specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by air or by sea
  • Application:Used in Synthesis, Pharmaceuticals and other fields
Contact Supplier

Zhuozhou Wenxi import and Export Co., Ltd

China (Mainland) Assessed Supplier

Wholesale price CAS 68955-19-1 with best price

  • Assay:98%,99%,
  • Appearance:White powder
  • Package: [Packaging]20mg, 50mg,100mg,1g,10g,100g,according to customers' requirements
  • Storage: should be stored in a well-closed container at low temperature, keep away from moisture, heat and light.
  • Transportation:1. Samples 1kg-10kg are shipped by international express. 2. 50kg-100kg of goods are transported by dedicated line logistics. 3. Cargo 100kg-1ton is transported by dedicated line logistics.
  • Application:Chemical raw materials, pharmaceutical intermediates, cosmetic raw materials, etc.
Contact Supplier

Qingdao Beluga Import and Export Co., LTD

China (Mainland) Assessed Supplier

Sulfuric acid, mono-C12-18-alkyl esters, sodium salts CAS:68955-19-1

  • Assay:99%
  • Appearance:Brown powder
  • Package:According to customer requirements
  • Storage:Avoid light, ventilation and shade
  • Transportation:Sea or Air
  • Application:It is an important raw material and intermediate
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View