N-METHYL-4-(P-FORMYLSTYRYL)PYRIDINIUM METHYLSULFATE

MSDS :
 N-Methyl-4-(P-Formylstyryl)-Pyridinium Methylsulfate
CAS 
:
 74401-04-0
SYNONYMS 
:
 None Listed.
Catalog of Chemical Suppliers, Buyers, Custom Synthesis Companies And Equipment Manufacturers
[ N-Methyl-4-(P-Formylstyryl)-Pyridinium Methylsulfate 74401-04-0 ]
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 74401-04-0 |N-Methyl-4-(P-Formylstyryl)-Pyridinium| ca. 100% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 43 52/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
May cause sensitization by skin contact. Harmful to aquatic
organisms, may cause long-term adverse effects in the aquatic
environment.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May cause sensitization by skin contact.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 74401-04-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: bright yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: > 360 deg C
Freezing/Melting Point: 207-212 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Partially soluble.
Specific Gravity/Density:
Molecular Formula: C16H17NO5S
Molecular Weight: 335.1827

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, sulfur oxides (SOx), including sulfur oxide
and sulfur dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 74401-04-0 unlisted.
LD50/LC50:
Not available.
Oral LD50: Rat: >2000 mg/kg
mg/kg
Carcinogenicity:
N-Methyl-4-(P-Formylstyryl)-Pyridinium Methylsulfate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/AD Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 43 May cause sensitization by skin contact.
R 52/53 Harmful to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 74401-04-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 74401-04-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 74401-04-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/25/2000 Revision #4 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
;

Recommended suppliers

Ality Chemical Corporation

China (Mainland) Assessed Supplier

Factory Supply N-methyl-4-(p-formylstyryl)pyridinium methylsulfate

  • Assay:99.9%
  • Appearance:Refer to COA
  • Package:drum
  • Storage:keep in cool and dry place
  • Transportation:by sea or by air
  • Application:Intermediates and materials
Contact Supplier

Chemwill Asia Co., Ltd.

China (Mainland) Assessed Supplier

N-Methyl-4-(p-formylstyryl)pyridinium Methylsulfate

  • Assay:1,d,
  • Appearance:As per Certificate of analysis and our TDS, MSDS
  • Package:Export standard and according to the clients requirement
  • Storage:Store in dry, dark and ventilated place;ISO / Kosher /GMP licence commercial bulk capacity factory in China
  • Transportation:By AIR or by SEA GMP licence / US-FDA,South Korea-KFDA
  • Application:It is an important raw material and intermediate for chemical industry.
Contact Supplier

Hebei Nengqian Chemical Import and Export Co., LTD

China (Mainland) Assessed Supplier

N-METHYL-4-(P-FORMYLSTYRYL)PYRIDINIUM METHYLSULFATE

  • Assay:1,
  • Appearance:white
  • Package:Bagged or according to your request
  • Storage:2-8°C
  • Transportation:Transport: EMS,DHL, TNT, UPS ,FEDEX, BY AIR, BY SEA DHL Express, FedEx and EMS for quantity less than 50KG, usually called as DDU service; Sea shipping for quantity over 500KG; And air shipping i
  • Application:Pharmaceutical intermediates.
Contact Supplier

Shanghai Upbio Tech Co.,Ltd

China (Mainland) Assessed Supplier

N-METHYL-4-(P-FORMYLSTYRYL)PYRIDINIUM METHYLSULFATE

  • Assay:99%,
  • Appearance:white crystalline powder
  • Package:1kg/pack,10kg/pack,,25kg/drum
  • Storage:Store in dry、dark、ventilated place.
  • Transportation:BY EMS,FEDEX,DHL,Special Line
  • Application:pharmaceutical raw material
Contact Supplier

Shandong Hanjiang Chemical Co., Ltd.

China (Mainland) Assessed Supplier

N-METHYL-4-(P-FORMYLSTYRYL)PYRIDINIUM METHYLSULFATE

  • Assay:99%
  • Appearance:White fine powder
  • Package:according to the clients requirement
  • Storage:Store in dry dark and ventilated place
  • Transportation:Transportation by express, air, sea; port mainly to Qingdao / Tianjin / Shanghai, or according to customer needs to send different ports and aviation.
  • Application:It is an important raw material.
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View