information Related products Suppliers

Amines, polyethylenepoly-, reaction products with succinic anhydride polyisobutenyl derivs.

MATERIAL SAFETY DATA SHEET
H&W Petroleum Co., Inc.
9617 Wallisville Rd. ?? Houston, TX 77013 ?? (713) 672-0893
MATERIAL SAFETY DATA SHEET U.S. DEPARTMENT OF LABO May be used to comply OSHA??s Hazard Occupational Safety and Health
Communication Standard 29 CFR 1910.1200. Administration. (Non-Mandatory Form)
Standard must be consulted for specific requirements. Form Approved OMB No.1218-0072.
SECTION I GENERAL INFORMATION
TEX DEXRON?III/MERCON? Automatic Transmission Fluid
PRODUCT NAME
PART NUMBE SECTION II HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
COMPONENT WT.% C.A.S. No TLV(ACGIHxx OSHA--)
Lube Oil Additive with Borated Polybutenyl Succinic <12 N/A N/A
Anhydride Nitrogen Functionalized Dispersant,
Substituted Alkyl Phosphite, Methacrylate Copolymer
and Solvent Extracted Mineral Oil
Methyacrylate Polymer <4 N/A N/A
Amines, Polyethylenepoly-, Reaction Products with <4 84605-20-9 N/A
Succinic Anhydride Polyisobutenyl Derivatives
Solvent Naphtha (petroleum), Medium Aliphatic <4 64742-88-7 N/A
Petroleum Distillates, Solvent Dewaxed Heavy Paraffinic Blend* 64742-65-0 N/A
Petroleum Distillates, Solvent Dewaxed Light Paraffinic Blend* 64742-56-9 N/A
Petroleum Distillates, Hydrotreated Light Paraffinic Blend* 64742-55-8 N/A
Petroleum Distillates, Hydrotreated Heavy Paraffinic Blend* 64742-54-7 N/A
Distillates (petroleum), Solvent Refined Light Naphthenic Blend* 64741-97-5 N/A
*The maximum percentage of the petroleum distillate and/or residual oil blend contained in this
product is: 88%. This product has been reviewed using the criteria specified in 29 CF 1910.1200 (Hazard communication Standard). All mineral oils used in this product have been
severely hydrotreated and/or solvent refined.
SECTION III PHYSICAL/CHEMICAL CHARACTERISTICS
Specific Gravity (H2O=1) 0.86 -0.88 Appearance Red liquid
Solubility in Water N/D pH N/A
Flash Point (COP), ??F (??C) 350 (177) Solubility in Solvent N/A
Melting Point, ??F N/A %Volatiles By Wt. N/A
Vapor Pressure (mmHg) N/A Boiling Point, ??F N/A
Evaporation Rate (Butyl N/A Vapor Density (Air=1) N/A
Acetate=1) Viscosity, cSt 37.6@40??C; 6.80@100??C
SECTION IV FIRE AND EXPLOSION HAZARD DATA
EXTINGUSHING MEDIA:
Water Foam xx CO2 xx Dry xx
Fog Chemicals
SPECIAL FIRE FIGHTING PROCEDURES Wear self-contained positive pressure breathing
apparatus with a full facepiece. Water or foam may cause frothing, which can violent.
UNUSUAL FIRE AND EXPLOSION HAZARDS This semi-solid material will burn with a slow
smoldering flame. Toxic fumes, gases or vapors may involve in burning. The liquid is volatile and
gives off invisible vapors. Either the liquid or vapor may be heavier than air and settle in low areas
or travel along the ground to an ignition source where they may ignite or explode. Container may
rupture on heating.
SECTION V REACTIVITY DATA
Stable xx Unstable Corrosive No Hazardous Yes No xx
Polymerization?
Incompatibilities: Strong oxidizing agents.
Hazardous Decomposition or Byproducts: Carbon monoxide, carbon dioxide, and oxides of
boron and phosphorus.
MATERIAL SAFETY DATA SHEET PRODUCT: TEX Dexron?III/Mercon? Automatic Transmission Fluid
Revision Date: 01/02/2004

SECTION VI HEALTH HAZARD INFORMATION
Recommended TLV of Product N/A
EYE May cause eye irritation. SKIN CONTACT Prolonged or repeated
CONTACT contact may cause
irritation/dermatitis, may
result in allergic skin
sensitization reactions.
INHALATION Not a likely route of exposure at INGESTION Not a likely route of
standard temperatures and exposure. If swallowed,
pressures. Inhalation of oil mists can cause irritation,
or fumes can cause irritation of vomiting, diarrhea
the nose, throat and upper blindness and death
respiratory tract. Repeated and Small amounts of this
prolonged overexposure to oil product, if aspirated into
mists may result in droplet the lungs, may cause
deposition, oil granuloma mild to severe
formation, inflammation and pulmonary injury,
increased incidence of infection. possibly death.
OTHER None known.
SECTION VII EMERGENCY AND FIRST AID PROCEDURES
EYE Flush with water for 15 minutes thoroughly. Get medical attention if irritation
CONTACT develops or persists.
SKIN Remove contaminated clothing. Wash with soap and water. Get medical
CONTACT attention if skin disorder develops. Launder contaminated clothing before reuse.
INHALATION Remove to fresh air. If not breathing, give mouth to mouth resuscitation. If
inhalation is excessive (air concentration is greater that the TLV or health effects
are noticed), immediately remove affected person(s) to fresh air.
INGESTION DO NOT INDUCE VOMITING. Consult local poison control center or get medical
attention.
SECTION VIII SPECIAL PROTECTION INFORMATION
CONSUMER BULK HANDLING (Prolonged Exposure)
RESPIRATORY N/A Wear NIOSH-approved disposable dust/mist
PROTECTION mask breathing apparatus.
VENTILATION Use with adequate ventilation. General.
EYE N/A Goggles or full-face shield.
PROTECTION
PROTECTIVE N/A Neoprene gloves and apron.
CLOTHING
SECTION IX PRECAUTIONS FOR SAFE HANDLING AND USE
SPILL OR LEAK For small spills, absorb liquid on vermiculite or other absorbent. For
PROCEDURE large spills stop spill at the source. Pump or vacuum transfer spilled
product to clean containers for recovery, recycle and/or reuse. Use
personal protective equipment. Ventilate spill area. Prevent entry
into sewers and waterways.
WASTE DISPOSAL Dispose in accordance with all applicable local, state and federal
METHOD regulations.
STORAGE AND Store away from potential sources of ignitions. Open container in a
HANDLING well ventilated area. Avoid breathing vapors. Use a NIOSH-approved
PRECAUTIONS respirator if exposed to oil mist, and adequate ventilation is not
possible. Wash thoroughly after handling.
OTHER PRECAUTIONS Keep away from children and animals.

Supersedes___________________ OSHA Revised______________________
Title_______________________________
While H&W Petroleum Co., Inc. believes this data is accurate as of revision date, we
make no warranty with respect to the data and we expressly disclaim all liability for
reliance thereon. The data is offered solely for your information, investigation, and
MATERIAL SAFETY DATA SHEET PRODUCT: TEX Dexron?III/Mercon? Automatic Transmission Fluid
Revision Date: 01/02/2004

verification.

;