information Related products Suppliers

1,2-Ethanediamine, N,N-bis(2-aminoethyl)-, polymer with methyloxirane

Vantico A&T US Inc.

DISTRIBUTED BY FREEMAN MFG & SUPPLY CO. 800-321-8511

24-Hour Health/Environmental Emergency Phone: 1-888-354-3323

MSDS No: 31969
Effective Date: 3/20/03 Material Safety Data Sheet

Health 3
1. PRODUCT IDENTIFICATION 1
Flammability 1
3 0
Reactivity 0
Trade Name: Ren 8110 Fast
Protective Equipment
Chemical Family: Amine
HMIS RATING
NFPA RATING
Synonyms:
RP 8110 Fast Hardener

Intended Use or Product Type: Laminating hardener

2. COMPOSITION / INFORMATION ON INGREDIENTS

O CAS No. CHEMICAL IDENTITY EXPOSURE LIMITS CARCINOGEN
S STATUS
H ACGIH OSHA MFR. IARC NTP OSHA
A TWA STEL PEL STEL
* 112-24-3 1,2-Ethanediamine, NE NE NE NE NE NR NR N N,N'-bis(2-aminoethyl)-
Common Triethylenetetramine
Name:
* 26950-63-0 1,2-Ethanediamine, NE NE NE NE NE NR NR N N,N'-bis(2-aminoethyl)-, polymer
with methyloxirane
Common Propoxylated Triethylenetetramine
Name:

NE = Not Established NR = Not Reviewed * = OSHA Hazardous Ingredient

3. HAZARDS IDENTIFICATION

Emergency Overview: Corrosive - Causes eye burns and skin irritation.

Primary Route(s) of Entry: Dermal; heated product may produce inhalable vapors.

4. FIRST AID MEASURES

Ingestion: If conscious, give 2 - 4 glasses of water to drink. Do not induce vomiting. Call a physician.

Printed: 22/09/2003 Ren 8110 Fast Vantico A&T US Inc.
Effective Date: 3/20/03

Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Destroy contaminated
shoes.

Inhalation: Remove to fresh air. Call a physician.

Eyes: Immediately flush eyes with water for at least 15 minutes. Call a physician.

Overexposure Effects: Corrosive - causes eye burns. Causes skin irritation.

Medical Conditions Aggravated by Exposure: Skin and eye conditions.

Additional Information: Referral to a physician is recommended if there is any question about the seriousness of any injury.

5. FIRE FIGHTING MEASURES

> 300??F (> 149 ??C)
Flash Point:
PMCC
Flash Point Method Used:
Not established
Flammable Limits in Air (Lower - % by volume):
Not established
Flammable Limits in Air (Upper - % by volume):

Fire Fighting Extinguishing Media: Carbon dioxide, dry chemical, foam, water.

Fire Fighting Equipment: Use self-contained breathing apparatus.

Fire and Explosion Hazards: Decomposition and combustion products may be toxic.

6. ACCIDENTAL RELEASE MEASURES

Accidental Release Measures: Remove spillage by absorbing in absorbent material.

7. HANDLING AND STORAGE

Signal Word: Danger!

Precautions: Corrosive - causes eye burns. Can cause skin irritation. Do not get in eyes. Avoid breathing vapor or mist. Avoid
contact with skin and clothing. Keep container closed when not in use. Use with adequate ventilation. Wash thoroughly after
handling.

Other Handling Information: Nuisance dust may be generated when sanding or sawing cured material.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Skin Protection: Wear impermeable gloves.

Respiratory Protection: Use NIOSH approved organic vapor cartridge respirator when vapor/mist exposure is likely.

Eye Protection: Wear splash-proof chemical goggles.

Engineering Controls: General mechanical and local exhaust in accordance with ACGIH recommendations.

Printed: 22/09/2003 Ren 8110 Fast Vantico A&T US Inc.
Effective Date: 3/20/03

9. PHYSICAL AND CHEMICAL PROPERTIES

Light Amber
Color:
Amine
Odor:
Liquid
Physical State:
Moderate
Solubility in Water:
0.01 mm Hg at 20??C (68 ??F)
Vapor Pressure:
1.02 (water = 1)
Specific Gravity:
Not Determined
Boiling Point:
Not Determined
Evaporation Rate:
Not Determined
Vapor Density:
Not Determined
pH:

Percent Volatile: Negligible.

10. STABILITY AND REACTIVITY

Conditions to Avoid: Excessive heat for prolonged periods of time.

Stability: Stable.

Incompatibility: Strong oxidizing agents, acids, metal-organic compounds.

Hazardous Decomposition Products: Combustion may form toxic materials, such as carbon dioxide, carbon monoxide.

Hazardous Polymerization: Will not occur.

11. TOXICOLOGICAL INFORMATION

Skin Irritation: Irritant.

Eye Irritation: Corrosive. Causes burns.

12. ECOLOGICAL INFORMATION

13. DISPOSAL CONSIDERATIONS

Waste Disposal Method: Consult qualified local or corporate personnel for method that will comply with local, state and federal
health and environmental regulations.

14. TRANSPORT INFORMATION

DOT: Non-Bulk
Resin compounds, N.O.I.
Proper Shipping Name:

Printed: 22/09/2003 Ren 8110 Fast Vantico A&T US Inc.
Effective Date: 3/20/03

Department of Transportation: Not regulated as a hazardous material by the U.S. Dept. of Transportation (DOT) 49 CFR 172.101
hazardous materials table.

15. REGULATORY INFORMATION

US Federal Regulations:
Occupational Safety and Health Act (OSHA): This Material Safety Data Sheet (MSDS) has been prepared in compliance with the
federal OSHA Hazard Communication Standard 29 CFR 1910.1200. This product is considered to be a hazardous chemical under
that standard.

Resource Conservation and Recovery Act (RCRA): Not a hazardous waste under RCRA (40 CFR 261).

SARA Title III: Section 313 Toxic Chemical List (TCL): This product does not contain any chemicals for routine annual toxic
chemical release reporting under Section 313 (40 CFR 372).

TSCA Section 8(b) - Inventory Status: Chemical components listed on TSCA Inventory.

TSCA Section 12(b) - Export Notification: This product does not contain any chemical(s) that are subject to a Section 12(b) export
notification.

State Regulations:
Pennsylvania Right-to-Know: The following is required composition information:

Chemical Name: 1,2-Ethanediamine, N,N'-bis(2-aminoethyl)-, polymer with methyloxirane
Common Name: Propoxylated Triethylenetetramine
CAS Number: 26950-63-0
Comment: Not on Pennsylvania Hazardous Substance List

Chemical Name: 1,2-Ethanediamine, N,N'-bis(2-aminoethyl)-
Common Name: Triethylenetetramine
CAS Number: 112-24-3
Comment: Hazardous Substance

16. OTHER INFORMATION

31969
MSDS No:
Kenneth L. Payne
Approved By:
E,H&S Manager
Title:

Disclaimer: The following supercedes Buyer??s documents. SELLER MAKES NO REPRESENTATION OR WARRANTY,
EXPRESS OR IMPLIED, INCLUDING OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No
statements herein are to be construed as inducements to infringe any relevant patent. Under no circumstances shall Seller be liable for
incidental, consequential or indirect damages for alleged negligence, breach of warranty, strict liability, tort or contract arising in
connection with the product(s). Buyer??s sole remedy and Seller??s sole liability for any claims shall be Buyer??s purchase price. Data
and results are based on controlled or lab work and must be confirmed by Buyer by testing for its intended conditions of use. The
product(s) has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes,
abraded skin, or blood is intended; or for uses for which implantation within the human body is intended.

Printed: 22/09/2003 Ren 8110 Fast Vantico A&T US Inc.
Effective Date: 3/20/03

Printed: 22/09/2003
;