information Related products Suppliers

Gafac RM 410

MATERIAL SAFETY DATA SHEET

LPS 2 Industrial Strength Lubricant
Section 1 ?? Product and Company Identification

Manufacturer's Name: LPS Laboratories Chemical Family: Petroleum Distillates

Trade Name: LPS 2 Industrial Strength Lubricant Telephone Number: 770-243-8800

Part Numbers: 00216 (aerosol) 00222, 02128, 00205, 00255 Emergency Telephone Number:
1-800-424-9300 Chemtrec;
Outside U.S.: (703) 527-3887
Address:
4647 Hugh Howell Road
Tucker, GA USA 30085-5052 Website: http://www.lpslabs.com

PLAIN LANGUAGE HAZARD SUMMARY

Material Safety Data Sheets can be confusing. Federal and State laws require us to include a great deal of technical
information that probably won??t help the non-professional. LPS includes this ??PLAIN LANGUAGE HAZARD SUMMARY?? to
address the questions and concerns of the average worker. If you have additional health, safety or product questions,
don??t hesitate to call us at 800/241-8334.

Worker Toxicity

LPS 2 Industrial Strength Lubricant is an industrial chemical. It is a specialized lubricant designed to reduce friction, heat,
noise, and wear between moving parts, and to loosen rusted or immovable parts and mechanisms. It contains petroleum
distillates and mineral oil that can be irritating to skin. It contains petroleum distillates and mineral oil that can be irritating
to skin. Avoid extended exposure to unprotected skin. Don??t get it in your eyes (it stings), or breath the vapor (if working on
hot surfaces or heated tanks). Vapors from heated LPS 1 can make you dizzy and even sick. For more exposure and first
aid information, refer to MSDS Sections 2, 8 and 11.

Flammability

LPS 2 Industrial Strength Lubricant is combustible having a flash point above 170oF and an autoignition temperature over
400oF. Under normal use conditions flammability isn??t a concern, but don??t apply the product onto red-hot metal surfaces
or near sparks.
Disposal
LPS 2 Industrial Strength Lubricant in non-aerosol form is not hazardous for disposal; however, if it becomes
contaminated with another substance, the resulting mixture may fall under a hazardous classification. See section 13 for
more details.

Current Revision 5/18/06 ?? Previous Revision: 5/7/05 page 1 of 7
MATERIAL SAFETY DATA SHEET

LPS 2 Industrial Strength Lubricant
Section 2 ?? Hazards Identification

This preparation is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).

Emergency Overview: Aerosol: DANGER: Flammable. Aerosol contents under pressure. Harmful or Fatal if Swallowed.
Bulk: CAUTION: Combustible liquid and vapor. May be harmful if inhaled.

Primary route(s) of entry: Skin and Eye contact. Inhalation.

Potential Acute Health Effects:

Irritating to eyes
Eyes:

Repeated exposure may cause skin dryness or cracking.
Skin:

Excessive inhalation of vapors can cause irritation of the respiratory tract, nausea, dizziness or headache.
Inhalation:

Product has a low order of acute oral toxicity, but ingestion of large quantities may cause nausea,
Ingestion:
vomiting, and gastrointestinal irritation. May cause injury if aspirated into lungs.

Potential Chronic Health Effects:

Carcinogenic Effects: NTP: No IARC: No OSHA: No

Mutagenic Effects: None

Teratogenic Effects: None

Medical conditions aggravated by exposure: Persons with pre-existing central nervous system (CNS) disease,
neurological conditions, skin disorders, chronic respiratory diseases, or impaired liver or kidney function should avoid
exposure.

Signs and Symptoms

Stinging in eyes. Repeated or prolonged skin contact can cause redness, irritation, and scaling of the skin (dermatitis).
Breathing of high vapor concentrations may cause headaches, stupor, irritation of throat and eyes, and kidney effects.

Section 3 ?? Composition / Information on Ingredients

Component CASRN Percent by Weight
Distillates (petroleum), hydrotreated light 64742-47-8 70 - 80%
Distillates, petroleum, hydrotreated heavy naphthenic 64742-52-5 10 - 20%
Carbon Dioxide propellant (aerosol only) 124-38-9 1 - 4%
Non-Hazardous Ingredients* N/A 5 ?? 15%

*All remaining materials are not classified as ??hazardous?? per 29 CFR 1900.1200 Subpart Z
Section 4 ?? First Aid Measures

Check for and remove contact lenses. If irritation or redness develops, flush eyes with cool, clean, low-
Eyes:
pressure water for at least 15 minutes. Hold eyelids apart to ensure complete irrigation of the eye and
eyelid tissue. Do not use eye ointment. Seek medical attention immediately.

Current Revision 5/18/06 ?? Previous Revision: 5/7/05 page 2 of 7
MATERIAL SAFETY DATA SHEET

LPS 2 Industrial Strength Lubricant
Section 4 ?? First Aid Measures - continued

Remove contaminated shoes and clothing. Clean affected area thoroughly with mild soap and water. Do
Skin:
not use ointments. Seek medical attention if irritation persists.

Immediately move victim to fresh air. If victim is not breathing, immediately begin rescue breathing. If
Inhalation:
heart has stopped, immediately begin cardiopulmonary resuscitation (CPR). If breathing is difficult, seek
medical attention immediately.

Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by
Ingestion:
mouth to an unconscious person. If spontaneous vomiting is about to occur, place victim??s head below
knees. If victim is drowsy or unconscious, place on the left side with head down. Do not leave victim
unattended. Seek medical attention immediately.

Section 5 ?? Fire Fighting Measures

Products of Combustion: Carbon monoxide and carbon dioxide.

Firefighting media: SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. Cool containing vessels with water jet in order to
prevent pressure build-up, autoignition or explosions.

Sensitivity to Impact: None Sensitivity to Static Discharge: None

Protection Clothing (Fire): Firefighters must use full bunker gear including NIOSH-approved positive pressure self-contained
breathing apparatus to protect against potential hazardous combustion or decomposition products and oxygen deficiencies.
Evacuate area and fight the fire from a maximum distance or use unmanned hose holders or monitor nozzles.

Special Remarks on Explosion Hazards: Aerosols may explode upon heating, spread fire and overcome sprinkler systems.

Section 6 ?? Accidental Release Measures

Small Spill and Leak: Absorb with an inert material and dispose of properly.

Large Spill and Leak: For large spills, secure the area and control access. Dike far ahead of a liquid spill to ensure complete
collection. Pick up free liquid for disposal using absorbent pads, sand, or other inert non-combustible absorbent materials.
Place into appropriate waste containers for later disposal.

Section 7 ?? Handling and Storage

Handling: DO NOT spray into or around ignition sources. After handling, always wash hands thoroughly with soap and
water. Use only with adequate ventilation. Avoid breathing vapors or spray mists.

Storage: Keep container in a cool, well-ventilated area. Avoid all sources of ignition (spark or flame). Store below 120??F.

Precautions to be taken in handling and storage: Store aerosols as Level 3 Aerosol (NFPA 30B). Store all materials in
dry, well-ventilated area. Avoid breathing vapors.

Current Revision 5/18/06 ?? Previous Revision: 5/7/05 page 3 of 7
MATERIAL SAFETY DATA SHEET

LPS 2 Industrial Strength Lubricant

Section 8 ?? Exposure Controls / Personal Protection

Ingredients CASRN OSHA PEL- ACGIH-TLV Other Limits
TWA
Distillates (petroleum), hydrotreated 64742-47-8 Not Not 100 ppm (supplier
light established established recommended TWA)
10 mg/m3 ACGIH-STEL
Distillates, petroleum, hydrotreated 64742-52-5 Not 400 ppm
(Oil Mist)
heavy naphthenic established
Carbon Dioxide propellant 124-38-9 10,000 ppm 5,000 ppm 30,000 ppm ACGIH STEL
(aerosol only)

Engineering Controls: Provide exhaust ventilation or other engineering controls to keep the airborne
concentrations of vapors below their respective occupational exposure limits.
Personal Protection:

Eyes: Safety glasses.

Respiratory : Use appropriate respirator if ventilation is inadequate.

Hands: Use solvent resistant gloves.

General Hygiene Considerations: Wash thoroughly after handling. Have eye-wash facilities immediately available.

Section 9 ?? Physical and Chemical Properties

Liquid. Brown
Appearance: Color:

Petroleum / Cherry <0.05mmHg @ 20 ??C
Odour/Taste: Vapour Pressure:

<3% <0.1(BuAc=1)
Solubility Description: Evaporation Rate:

79??C (175oF)
195 @ 760mmHg
Boiling Point (??C): Flash Point (??C):

0.82-0.86 @ 20 ??C Tag-Closed Cup.
Specific Gravity (Water=1): Flash Point Method:
o o
4.7 >228 C(442 F)
Vapour Density (air=1): Auto Ignition
Temperature (??C):

0 g/L <1
V.O.C. Content: Partition Coefficient
(octanol/water):

<7 centistokes @ 25oC
LOWER: 0.6%
Flammable limits Viscosity:
UPPER: 7%
(estimated):

Not applicable
pH:

Current Revision 5/18/06 ?? Previous Revision: 5/7/05 page 4 of 7
MATERIAL SAFETY DATA SHEET

LPS 2 Industrial Strength Lubricant

Section 10 ?? Stability and Reactivity

Stability and Reactivity: The product is stable.

Incompatibility with Various Substances: Extremely reactive or incompatible with oxidizing agents.

Hazardous decomposition products: These products are carbon oxides (CO, CO2)

Hazardous polymerization: Will not occur.

Section 11 ?? Toxicological Information

Acute and Chronic Toxicity

A: General Product Information

Following exposure to vapors, this material can produce central nervous system depression. High atmospheric
concentrations can result in eye, nasal and respiratory tract irritation. However, if handled in accordance with good
industrial hygiene practice, this product will not present a significant hazard in the workplace.

Ingredients CASRN LC-50 LD-50
Distillates (petroleum), hydrotreated light 64742-47-8 >6.8 mg/L >5 g/kg
Distillates, petroleum, hydrotreated heavy naphthenic 64742-52-5 Not established Not established
Carbon Dioxide 124-38-9 Not established Not established

Section 12 ?? Ecological Information

Component Data: Acute Aquatic Toxicity

Component CASRN Test Species Results
Distillates (Petroleum), Hydrotreated Light 64742-47-8 96-hour LC50 2900 ??g/L
Oncorhynchus mykiss
4-day LC50 Lepomis macrochirus 2200 ??g/L
Distillates (petroleum), hydrotreated heavy 64742-52-5
No Data
naphthenic

For the 64742-47-8 component, no toxicity has been observed in water due to extremely low water solubility. If material is
spilled on soil, some potential toxic effects could occur before biodegradation could remove material.

If spilled, the 64742-52-5 constituent may kill grasses and small plants by interfering with transpiration. Spilled material
may coat gill structures of fish resulting in suffocation if spilled in shallow, running water. This product may be toxic to
amphibians by preventing dermal respiration. This product may also cause gastrointestinal distress to birds and mammals
through ingestion. Biodegradation of this product is possible within 90 to 120 days in aerobic environments at
temperatures above 21oC.

Current Revision 5/18/06 ?? Previous Revision: 5/7/05 page 5 of 7
MATERIAL SAFETY DATA SHEET

LPS 2 Industrial Strength Lubricant
Section 13 ?? Disposal Considerations
Waste Status: In its purchased form, non-aerosol material does not meet the definition of a RCRA hazardous waste. However,
full aerosols are a RCRA hazardous waste carrying waste code D003.

Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Note: Chemical additions to, processing of, or otherwise altering this material may make this waste management
information inaccurate, incomplete, or otherwise inappropriate. Furthermore, state and local waste disposal
requirements may be more restrictive than federal laws and regulations.

Section 14 ?? Transport Information
Aerosols Only

Mode Shipping Name Hazard Subclass UN Technical Hazard Packing Emergency
Class Number Name Label Group Response
Guide
D.O.T. Consumer ORM-D NA 1950 NA ORM-D NA NA
Ground Commodity
IATA AEROSOLS, 2.1 NA 1950 NA Flammable NA NA
flammable Gas
IMDG AEROSOL 2.1 NA 1950 NA Flammable NA F-D, S-U
(Regular) Gas
IMDG Dangerous Goods in NA NA 1950 NA NA NA F-D, S-U
(Special) Limited quantities of
Class 2

Non-Aerosols of this product are not regulated by any mode of transportation.

Section 15 ?? Regulatory information

TSCA 8(b) inventory: All of the ingredients are listed on the TSCA inventory or are exempt.
U.S. Federal
Regulations:
RCRA Hazardous Waste No.: D003 (aerosols only)

CERCLA Sections 102a/103 Hazardous Substances (40 CFR part 302) Reportable Quantity: none

SARA TITLE III Sections 311/312 hazardous Categorization (40 CFR part 370): Sudden Release of
Pressure (aerosol only), Fire Hazard, Immediate (Acute) Health Hazard, Delayed (Chronic) Health
Hazard.

SARA TITLE III Section 313: No individual section 313 component is present at or above 1%.

New Jersey RTK: Distillates (petroleum), hydrotreated light (CASRN: 64742-47-8), Distillates,
State
petroleum, hydrotreated heavy naphthenic (CASRN: 64742-52-5), Trade Secret Reg. No. 800967-
Regulations:
5519P, Trade Secret Reg. No. 800967-5124P, Carbon Dioxide Propellant (CASRN: 124-38-9),
Phosphate Ester (CASRN: 39464-64-7)

California Proposition 65: None.

California and OTC States: This product conforms to consumer regulations.

Current Revision 5/18/06 ?? Previous Revision: 5/7/05 page 6 of 7
MATERIAL SAFETY DATA SHEET

LPS 2 Industrial Strength Lubricant

Section 16 ?? Other Information
HMIS-III NFPA
MSDS# 10216 Health: [/] 1
flammability
Responsible Name: Ed Williams Flammability: 2
Physical Hazard: 2 (aerosol)
Technical Manager
2
0 (other)
1
health 0 reactivity

Notice to Reader:
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its
subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination
of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with
caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.

Ed Williams, Technical Manager Form #2501
LPS Laboratories
A division of Illinois Tool Works

Current Revision 5/18/06 ?? Previous Revision: 5/7/05 page 7 of 7

;