2-Butenal, 2-methyl-,(2E)-

MSDS :
 trans-2-Methyl-2-butenal
CAS 
:
 497-03-0
SYNONYMS 
:
 Tiglic aldehyde.
Catalog of Chemical Suppliers, Buyers, Custom Synthesis Companies And Equipment Manufacturers
[ trans-2-Methyl-2-butenal 497-03-0 ]
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 497-03-0 |trans-2-Methyl-2-butenal | 98% | 207-833-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and
skin.Highly flammable.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
May cause cyanosis of the extremities.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed. Ingestion of large amounts may cause CNS
depression.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Aspiration may lead
to pulmonary edema. May be harmful if inhaled. Vapors may cause
dizziness or suffocation. May cause burning sensation in the chest.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Use water spray to keep fire-exposed
containers cool. Water may be ineffective. Material is lighter than
water and a fire may be spread by the use of water. Vapors may be
heavier than air. They can spread along the ground and collect in
low or confined areas. Will be easily ignited by heat, sparks or
flame. Containers may explode if exposed to fire. Runoff from fire
control or dilution water may cause pollution.
Extinguishing Media:
Water may be ineffective. If water is the only media available, use
in flooding amounts. Use water spray, dry chemical, carbon dioxide,
or chemical foam. Do NOT use straight streams of water. Cool
containers with flooding quantities of water until well after fire is
out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid breathing
dust, vapor, mist, or gas. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation.
Use only in a chemical fume hood. Wash clothing before reuse. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Refrigerator/flammables. Keep refrigerated. (Store below
4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 497-03-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless to light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 118 - 120 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 18 deg C ( 64.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.871
Molecular Formula: C5H8O
Molecular Weight: 84.0554

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not currently available.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 497-03-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
trans-2-Methyl-2-butenal -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ALDEHYDES, N.O.S.*
Hazard Class: 3
UN Number: 1989
Packing Group: II
IMO
Shipping Name: ALDEHYDES, N.O.S.
Hazard Class: 3
UN Number: 1989
Packing Group: II
RID/AD Shipping Name: ALDEHYDES, N.O.S.
Hazard Class: 3
UN Number: 1989
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 33 Take precautionary measures against static
discharges.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 497-03-0: No information available.
Canada
CAS# 497-03-0 is listed on Canada's DSL List.
CAS# 497-03-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 497-03-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/16/2002 Revision #2 Date: 6/13/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
;

Recommended suppliers

Chemwill Asia Co., Ltd.

China (Mainland) Assessed Supplier

(E)-Tiglaldehyde

  • Assay:1,d,
  • Appearance:As per Certificate of analysis and our TDS, MSDS
  • Package:Export standard and according to the clients requirement
  • Storage:Store in dry, dark and ventilated place;ISO / Kosher /GMP licence commercial bulk capacity factory in China
  • Transportation:By AIR or by SEA GMP licence / US-FDA,South Korea-KFDA
  • Application:It is an important raw material and intermediate for chemical industry.
Contact Supplier

Win-Win chemical Co.Ltd

China (Mainland) Assessed Supplier

TRANS-2-METHYL-2-BUTENAL Cas no.497-03-0 98%

  • Assay:98%
  • Appearance:liquid
  • Package:Grams, Kilograms
  • Storage:normal
  • Transportation:According to customer request
  • Application:For R&D
Contact Supplier

Zhuozhou Wenxi import and Export Co., Ltd

China (Mainland) Assessed Supplier

Manufacturer supply CAS 497-03-0 with best quality

  • Assay:98%,99%,
  • Appearance:White powder
  • Package: [Packaging]20mg, 50mg,100mg,1g,10g,100g,according to customers' requirements
  • Storage: should be stored in a well-closed container at low temperature, keep away from moisture, heat and light.
  • Transportation:1. Samples 1kg-10kg are shipped by international express. 2. 50kg-100kg of goods are transported by dedicated line logistics. 3. Cargo 100kg-1ton is transported by dedicated line logistics.
  • Application:Chemical raw materials, pharmaceutical intermediates, cosmetic raw materials, etc.
Contact Supplier

Shanghai Upbio Tech Co.,Ltd

China (Mainland) Assessed Supplier

2-Butenal, 2-methyl-,(2E)-

  • Assay:99%,
  • Appearance:white crystalline powder
  • Package:1kg/pack,10kg/pack,,25kg/drum
  • Storage:Store in dry、dark、ventilated place.
  • Transportation:BY EMS,FEDEX,DHL,Special Line
  • Application:pharmaceutical raw material
Contact Supplier

Shandong Hanjiang Chemical Co., Ltd.

China (Mainland) Assessed Supplier

2-Butenal, 2-methyl-,(2E)-

  • Assay:99%
  • Appearance:White fine powder
  • Package:according to the clients requirement
  • Storage:Store in dry dark and ventilated place
  • Transportation:Transportation by express, air, sea; port mainly to Qingdao / Tianjin / Shanghai, or according to customer needs to send different ports and aviation.
  • Application:It is an important raw material.
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View