Ethanesulfonic acid,sodium salt (1:1)

Material Safety Data Sheet
acc. to OSHA and ANSI

1 Identification of substance:
Product details:
Product name: Ethanesulfonic acid, sodium salt
2 Composition/Data on components:
Chemical characterization:
Description: (CAS#)
Ethanesulfonic acid, sodium salt (CAS# 5324-47-0); 100%
Identification number(s):
EINECS Number: 226-194-9

3 Hazards identification
Hazard description:


Xi Irritant


Information pertaining to particular dangers for man and environment
R 36/37/38 Irritating to eyes, respiratory system and skin.
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
HEALTH 1 Health (acute effects) = 1
Flammability = 0
FIRE 0
Reactivity = 1
REACTIVITY 1




4 First aid measures
After inhalation
Supply fresh air. If required, provide artificial respiration. Keep
patient warm.
Seek immediate medical advice.
After skin contact
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
After eye contact
Rinse opened eye for several minutes under running water. Then consult a
doctor.




D Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: Ethanesulfonic acid, sodium salt

After swallowing Seek immediate medical advice.

5 Fire fighting measures
Suitable extinguishing agents
Carbon dioxide, extinguishing powder or water spray. Fight larger fires
with water spray or alcohol resistant foam.
Special hazards caused by the material, its products of combustion or
resulting gases:
In case of fire, the following can be released:
Carbon monoxide and carbon dioxide
Sulfur oxides (SOx)
Metal oxide fume
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.

6 Accidental release measures
Person-related safety precautions:
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Measures for environmental protection:
Do not allow material to be released to the environment without proper
governmental permits.
Measures for cleaning/collecting: Ensure adequate ventilation.
Additional information:
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

7 Handling and storage
Handling
Information for safe handling:
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
Information about protection against explosions and fires:
No information known.
Storage
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Store away from oxidizing agents.
Store away from water/moisture.
Further information about storage conditions:
Protect from humidity and water.
This product is hygroscopic.
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.




D Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: Ethanesulfonic acid, sodium salt


8 Exposure controls and personal protection
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals
and having an average face velocity of at least 100 feet per minute.
Components with limit values that require monitoring at the workplace:
Not required.
Additional information: No data
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures for handling chemicals should be
followed.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Breathing equipment:
Use suitable respirator when high concentrations are present.
Protection of hands: Impervious gloves
Eye protection: Safety glasses
Body protection: Protective work clothing.

9 Physical and chemical properties:
General Information
Form: Powder
Color: White
Odor: Not determined
Change in condition
Melting point/Melting range: 267-270??C (513-518??F)
Boiling point/Boiling range: Not determined
Sublimation temperature / start: Not determined
Flash point: Not applicable
Ignition temperature: Not determined
Decomposition temperature: Not determined
Danger of explosion: Product does not present an
explosion hazard.
Explosion limits:
Lower: Not determined
Upper: Not determined
Vapor pressure: Not determined
Density: Not determined
Solubility in / Miscibility with
Water: Not determined


10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to
specifications.




D Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: Ethanesulfonic acid, sodium salt

Materials to be avoided:
Oxidizing agents
Water/moisture
Dangerous reactions No dangerous reactions known
Dangerous products of decomposition:
Carbon monoxide and carbon dioxide
Sulfur oxides (SOx)
Metal oxide fume

11 Toxicological information
Acute toxicity:
Primary irritant effect:
on the skin: Irritant to skin and mucous membranes.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
Subacute to chronic toxicity:
Other than potential irritation (see above), no information on illness or
injury to humans from acute or chronic exposure to this product is
available.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this
substance is not fully known.
No classification data on carcinogenic properties of this material is
available from the EPA, IARC, NTP, OSHA or ACGIH.

12 Ecological information:
General notes:
Do not allow material to be released to the environment without proper
governmental permits.

13 Disposal considerations
Product:
Recommendation
Consult state, local or national regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.

14 Transport information
Not a hazardous material for transportation.
DOT regulations:
Hazard class: None
Land transport ADR/RID (cross-border)
ADR/RID class: None
Maritime transport IMDG:
IMDG Class: None
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: None




D Material Safety Data Sheet
acc. to OSHA and ANSI

Product name: Ethanesulfonic acid, sodium salt


Transport/Additional information:
Not dangerous according to the above specifications.

15 Regulations
Product related hazard informations:
Hazard symbols:
Xi Irritant
Risk phrases:
36/37/38 Irritating to eyes, respiratory system and skin.
Safety phrases:
26 In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
37 Wear suitable gloves.
National regulations
This product is not listed in the U.S. Environmental Protection Agency
Toxic Substances Control Act Chemical Substance Inventory. Use of this
product is restricted to research and development only.
Information about limitation of use:
For use only by technically qualified individuals.


;

Recommended suppliers

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

Ethanesulfonic acid,sodium salt (1:1)

  • Assay:Industrial Grade,
  • Appearance:detailed see specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by air or by sea
  • Application:Used in Synthesis, Pharmaceuticals and other fields
Contact Supplier

Xi'an Xszo Chem Co., Ltd.

China (Mainland) Assessed Supplier

Factory price Cosmetic SODIUM ESYLATE 5324-47-0 Manufacturer

  • Assay:Cosmetic grade,
  • Appearance:Powder
  • Package:25Kgs/Drum,According to customer‘s requirement
  • Storage:Keep in a cool & dry place
  • Transportation:DHL, EMS, FedEx, TNT, AIR, SEA
  • Application:Cosmetics Ingredient and health products
Contact Supplier

Zhuozhou Wenxi import and Export Co., Ltd

China (Mainland) Assessed Supplier

Pharmaceutical Grade CAS 5324-47-0 with competitive price

  • Assay:98%,99%,
  • Appearance:White powder
  • Package: [Packaging]20mg, 50mg,100mg,1g,10g,100g,according to customers' requirements
  • Storage: should be stored in a well-closed container at low temperature, keep away from moisture, heat and light.
  • Transportation:1. Samples 1kg-10kg are shipped by international express. 2. 50kg-100kg of goods are transported by dedicated line logistics. 3. Cargo 100kg-1ton is transported by dedicated line logistics.
  • Application:Chemical raw materials, pharmaceutical intermediates, cosmetic raw materials, etc.
Contact Supplier

Hangzhou Keyingchem Co.,Ltd

China (Mainland) Assessed Supplier

sodium ethanesulphonate

  • Assay:98% or more
  • Appearance:high quality
  • Package:5kg 25kg According to clients' requirement
  • Storage:Store in dry, dark and ventilated place
  • Transportation:
  • Application:Intermediate and Industrial use
Contact Supplier

Wuhan Han Sheng New Material Technology Co.,Ltd

China (Mainland) Assessed Supplier

sodium ethanesulphonate

  • Assay:99%
  • Appearance:
  • Package:1kg/Alu bag, 25kgs/Drum
  • Storage:Dry and Cool Place and Keep Away From Strong Light
  • Transportation:*small quantity: By Fedex, DHL, HKPOST, UPS, TNT or As customers’ requirement *Bulk order: By air or sea *Delivery: within 3 days for samples and 10 days for bulk order
  • Application:Pharmaceuticals, pesticides, synthetic dyes, organic chemicals, inorganic chemicals, coatings, spices and essence, cosmetics and toilet products, soaps and synthetic detergents, surfactants, printing
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View