Acetic acid, lead salt,basic

1.
1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product identifiers
Product name
Product Number
Brand
Index-No.
CAS-No.
:
:
:
:
:
Lead(II) acetate basic
32306
Fluka
082-007-00-9
51404-69-4
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Carcinogenicity (Category 2)
Reproductive toxicity (Category 1A)
Specific target organ toxicity - repeated exposure (Category 2)
Acute aquatic toxicity (Category 1)
Chronic aquatic toxicity (Category 1)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Limited evidence of a carcinogenic effect. May cause harm to the unborn child. Possible risk of impaired
fertility. Harmful: danger of serious damage to health by prolonged exposure if swallowed. Danger of
cumulative effects. Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H351
H360Df
H373
H410
Danger
Suspected of causing cancer.
May damage the unborn child. Suspected of damaging fertility.
May cause damage to organs through prolonged or repeated exposure.
Very toxic to aquatic life with long lasting effects.
Precautionary statement(s)
P201
P273
P281
P308 + P313
P501
Supplemental Hazard
Obtain special instructions before use.
Avoid release to the environment.
Use personal protective equipment as required.
IF exposed or concerned: Get medical advice/ attention.
Dispose of contents/ container to an approved waste disposal plant.
none
Statements
Restricted to professional users.
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R61
R48/22
R33
R40
R50/53
R62
S-phrase(s)
S53
S45
S60
S61
May cause harm to the unborn child.
Also harmful: danger of serious damage to health by prolonged exposure
if swallowed.
Danger of cumulative effects.
Limited evidence of a carcinogenic effect.
Very toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
Possible risk of impaired fertility.
Avoid exposure - obtain special instructions before use.
In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
This material and its container must be disposed of as hazardous waste.
Avoid release to the environment. Refer to special instructions/ Safety
data sheets.
Restricted to professional users.
2.3
3.
3.1
Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Component
Lead acetate
Concentration
CAS-No.
EC-No.
Index-No.
51404-69-4
215-630-3
082-007-00-9
-
4.
4.1
FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2
4.3
5.
5.1
5.2
5.3
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
Most important symptoms and effects, both acute and delayed
Lead salts have been reported to cross the placenta and to induce embryo- and feto- mortality. They also
have teratogenic effect in some animal species. No teratogenic effects have been reported with exposure
to organometallic lead compounds. Adverse effects of lead on human reproduction, embryonic and fetal
development, and postnatal (e.g., mental) development have been reported. Excessive exposure can
affect blood, nervous, and digestive systems. The synthesis of hemoglobin is inhibited and results in
anemia. If left untreated, neuromuscular dysfunction, possible paralysis, and encephalopathy can result.
Additional symptoms of overexposure include: joint and muscle pain, weakness of the extensor muscles
(frequently the hand and wrist), headache, dizziness, abdominal pain, diarrhea, constipation, nausea,
vomiting, blue line on the gums, insomnia, and metallic taste. High body levels produce increased
cerebrospinal pressure, brain damage, and stupor leading to coma and often death., Anorexia., Vomiting,
Convulsions, permanent brain damage
Indication of any immediate medical attention and special treatment needed
no data available
FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
no data available
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.Avoid exposure - obtain special
instructions before use.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available
8.
8.1
8.2
9.
9.1
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Immersion protection
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: > 480 min
Material tested:Dermatril? ( Z677272, Size M)
Splash protection
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: > 30 min
Material tested:Dermatril? ( Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 873000, e-mail sales@kcl.de,
test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an Industrial Hygienist familiar with the specific situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
Appearance
Odour
Odour Threshold
pH
Form: powder
Colour: white
no data available
no data available
no data available
e)
f)
g)
h)
Melting point/freezing
point
Initial boiling point and
boiling range
Flash point
Evaporation rate
no data available
no data available
no data available
no data available
i)
Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
no data available
no data available
m) Relative density
no data available
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
soluble
no data available
no data available
no data available
no data available
no data available
no data available
9.2
Other safety information
Bulk density
2.400 g/l
10.
10.1
10.2
10.3
10.4
10.5
10.6
11.
11.1
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
no data available
Hazardous decomposition products
no data available
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
Limited evidence of carcinogenicity in animal studies
IARC:
IARC:
IARC:
2B - Group 2B: Possibly carcinogenic to humansRe-evaluation of inorganic lead compounds,
IARC Monograph (Vol. 87) (February 2004) (Lead acetate)
3 - Group 3: Not classifiable as to its carcinogenicity to humansRe-evaluation of organic lead
compounds, IARC Monograph (Vol. 87) (February 2004) (Lead acetate)
2A - Group 2A: Probably carcinogenic to humans (Lead acetate)
2A - Group 2A: Probably carcinogenic to humans (Lead acetate)
2B - Group 2B: Possibly carcinogenic to humansRe-evaluation of inorganic lead compounds,
IARC Monograph (Vol. 87) (February 2004) (Lead acetate)
3 - Group 3: Not classifiable as to its carcinogenicity to humansRe-evaluation of organic lead
compounds, IARC Monograph (Vol. 87) (February 2004) (Lead acetate)
2A - Group 2A: Probably carcinogenic to humans (Lead acetate)
2A - Group 2A: Probably carcinogenic to humans (Lead acetate)
2B - Group 2B: Possibly carcinogenic to humansRe-evaluation of inorganic lead compounds,
IARC Monograph (Vol. 87) (February 2004) (Lead acetate)
3 - Group 3: Not classifiable as to its carcinogenicity to humansRe-evaluation of organic lead
compounds, IARC Monograph (Vol. 87) (February 2004) (Lead acetate)
2A - Group 2A: Probably carcinogenic to humans (Lead acetate)
2A - Group 2A: Probably carcinogenic to humans (Lead acetate)
Reproductive toxicity
Known human reproductive toxicant
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. May cause respiratory tract irritation.
May be harmful if swallowed.
May be harmful if absorbed through skin. May cause skin irritation.
May cause eye irritation.
Signs and Symptoms of Exposure
Lead salts have been reported to cross the placenta and to induce embryo- and feto- mortality. They also
have teratogenic effect in some animal species. No teratogenic effects have been reported with exposure
to organometallic lead compounds. Adverse effects of lead on human reproduction, embryonic and fetal
development, and postnatal (e.g., mental) development have been reported. Excessive exposure can
affect blood, nervous, and digestive systems. The synthesis of hemoglobin is inhibited and results in
anemia. If left untreated, neuromuscular dysfunction, possible paralysis, and encephalopathy can result.
Additional symptoms of overexposure include: joint and muscle pain, weakness of the extensor muscles
(frequently the hand and wrist), headache, dizziness, abdominal pain, diarrhea, constipation, nausea,
vomiting, blue line on the gums, insomnia, and metallic taste. High body levels produce increased
cerebrospinal pressure, brain damage, and stupor leading to coma and often death., Anorexia., Vomiting,
Convulsions, permanent brain damage
Additional Information
RTECS: Not available
12.
12.1
12.2
12.3
12.4
12.5
12.6
13.
13.1
14.
14.1
ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
Very toxic to aquatic life.
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN number
14.2
ADR/RID: 2291
UN proper shipping name
IMDG: 2291
IATA: 2291
ADR/RID:
IMDG:
IATA:
LEAD COMPOUND, SOLUBLE, N.O.S. (Lead acetate)
LEAD COMPOUND, SOLUBLE, N.O.S. (Lead acetate)
Lead compound, soluble, n.o.s. (Lead acetate)
14.3
Transport hazard class(es)
14.4
14.5
14.6
15.
ADR/RID: 6.1
Packaging group
ADR/RID: III
Environmental hazards
ADR/RID: no
Special precautions for user
no data available
REGULATORY INFORMATION
IMDG: 6.1
IMDG: III
IMDG Marine pollutant: yes
IATA: 6.1
IATA: III
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
16.
OTHER INFORMATION
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.

;

Recommended suppliers

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

Lead acetate basic

  • Assay:Industrial Grade,
  • Appearance:detailed in specifications
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by air or by ocean shipping
  • Application:An important raw material and intermediate used in Organic Synthesis, Pharmaceuticals
Contact Supplier

Hangzhou Dingyan Chem Co., Ltd

China (Mainland) Assessed Supplier

High purity Lead(II) acetate basic with high quality and best price cas:51404-69-4

  • Assay:1,
  • Appearance:White powder
  • Package:25kg net/paper drum
  • Storage:Rom tep.
  • Transportation:By courier, air or sea.
  • Application:intermediate for organic synthesis
Contact Supplier

HANGZHOU TIANYE CHEMICALS CO., LTD.

China (Mainland) Assessed Supplier

Lead acetate basic

  • Assay:95%
  • Appearance:White to Beige Solid
  • Package:drum
  • Storage:Store below +30°C.
  • Transportation:according to your demand
  • Application:Chemical intermediate
Contact Supplier

Ality Chemical Corporation

China (Mainland) Assessed Supplier

Factory Supply Acetic acid, lead salt, basic

  • Assay:99.9%
  • Appearance:Refer to COA
  • Package:drum
  • Storage:keep in cool and dry place
  • Transportation:by sea or by air
  • Application:Intermediates and materials
Contact Supplier

Chemwill Asia Co., Ltd.

China (Mainland) Assessed Supplier

Lead acetate, basic

  • Assay:1,d,
  • Appearance:As per Certificate of analysis and our TDS, MSDS
  • Package:Export standard and according to the clients requirement
  • Storage:Store in dry, dark and ventilated place;ISO / Kosher /GMP licence commercial bulk capacity factory in China
  • Transportation:By AIR or by SEA GMP licence / US-FDA,South Korea-KFDA
  • Application:It is an important raw material and intermediate for chemical industry.
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View