Phosphonium,methyltriphenyl-, chloride (1:1)

1. 1.1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product identifiers Product name Product Number Brand Index-No. CAS-No. : : : : : Methyltriphenylphosphonium chloride 468002 Anonymous 017-016-00-9 1031-15-8 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances 2. 2.1 2.2 HAZARDS IDENTIFICATION Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Acute toxicity (Category 4) Acute toxicity (Category 4) Skin irritation (Category 2) Serious eye damage (Category 1) Chronic aquatic toxicity (Category 2) Classification according to EU Directives 67/548/EEC or 1999/45/EC Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Irritating to skin. Risk of serious damage to eyes. Harmful in contact with skin and if swallowed. Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Pictogram Signal word Hazard statement(s) H315 H302 H312 H318 H411 Danger Causes skin irritation. Harmful if swallowed. Harmful in contact with skin. Causes serious eye damage. Toxic to aquatic life with long lasting effects. Precautionary statement(s) P273 P280 P305 + P351 + P338 Supplemental Hazard Avoid release to the environment. Wear protective gloves/ eye protection/ face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. none Statements According to European Directive 67/548/EEC as amended. Hazard symbol(s) R-phrase(s) R21/22 R38 R41 R51/53 Harmful in contact with skin and if swallowed. Irritating to skin. Risk of serious damage to eyes. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. S-phrase(s) S22 S26 S36/37/39 S61 Do not breathe dust. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing, gloves and eye/face protection. Avoid release to the environment. Refer to special instructions/ Safety data sheets. 2.3 3. 3.1 Other hazards - none COMPOSITION/INFORMATION ON INGREDIENTS Substances Formula Molecular Weight Component : : C19H18ClP 312,77 g/mol Concentration Methyltriphenylphosphonium chloride CAS-No. EC-No. Index-No. 1031-15-8 418-400-2 017-016-00-9 - 4. 4.1 4.2 FIRST AID MEASURES Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. 4.3 5. 5.1 5.2 5.3 5.4 6. 6.1 6.2 6.3 6.4 7. 7.1 7.2 7.3 8. 8.1 8.2 Indication of any immediate medical attention and special treatment needed no data available FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Carbon oxides, Oxides of phosphorus, Hydrogen chloride gas Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information no data available ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. HANDLING AND STORAGE Precautions for safe handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Specific end uses no data available EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Immersion protection Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: > 480 min Material tested:Dermatril? (Anonymous Z677272, Size M) Splash protection Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: > 30 min Material tested:Dermatril? (Anonymous Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 873000, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an Industrial Hygienist familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. Body Protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). 9. 9.1 PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties a) b) c) d) e) f) g) h) Appearance Odour Odour Threshold pH Melting point/freezing point Initial boiling point and boiling range Flash point Evaporation rate Form: solid no data available no data available no data available Melting point/range: 221 °C - dec. no data available no data available no data available i) Flammability (solid, gas) no data available j) k) l) Upper/lower flammability or explosive limits Vapour pressure Vapour density no data available no data available no data available m) Relative density no data available n) Water solubility no data available o) p) q) r) s) t) Partition coefficient: n- octanol/water Autoignition temperature Decomposition temperature Viscosity Explosive properties Oxidizing properties no data available no data available no data available no data available no data available no data available 9.2 10. 10.1 10.2 10.3 10.4 10.5 10.6 11. 11.1 Other safety information no data available STABILITY AND REACTIVITY Reactivity no data available Chemical stability no data available Possibility of hazardous reactions no data available Conditions to avoid no data available Incompatible materials Oxidizing agents Hazardous decomposition products Other decomposition products - no data available TOXICOLOGICAL INFORMATION Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitization no data available Germ cell mutagenicity no data available Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure no data available Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Potential health effects Inhalation Ingestion Skin Eyes May be harmful if inhaled. Causes respiratory tract irritation. Harmful if swallowed. May be harmful if absorbed through skin. Causes skin irritation. Causes eye burns. Signs and Symptoms of Exposure To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Additional Information RTECS: Not available 12. 12.1 12.2 12.3 12.4 12.5 12.6 13. 13.1 14. 14.1 ECOLOGICAL INFORMATION Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment no data available Other adverse effects Toxic to aquatic life. Avoid release to the environment. DISPOSAL CONSIDERATIONS Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging Dispose of as unused product. TRANSPORT INFORMATION UN number 14.2 ADR/RID: 3077 UN proper shipping name IMDG: 3077 IATA: 3077 ADR/RID: IMDG: IATA: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Methyltriphenylphosphonium chloride) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Methyltriphenylphosphonium chloride) Environmentally hazardous substance, solid, n.o.s. (Methyltriphenylphosphonium chloride) 14.3 Transport hazard class(es) ADR/RID: 9 14.4 Packaging group ADR/RID: III 14.5 Environmental hazards ADR/RID: yes IMDG: 9 IMDG: III IMDG Marine pollutant: yes IATA: 9 IATA: III IATA: yes 14.6 15. 15.1 15.2 16. Special precautions for user Further information EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and combination packagings containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids. REGULATORY INFORMATION This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. Safety, health and environmental regulations/legislation specific for the substance or mixture no data available Chemical Safety Assessment no data available OTHER INFORMATION Further information The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The informationin this document is based on the resent state of our knowledge and is applicable to the product with regard toappropriate safety precautions. It does not represent any guarantee of the properties of the product. Lookchem shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale.

Related Product

• 10311-59-8
• 10311-61-2
• 1031161-43-9
• 10311-62-3
• 103116-96-7
• 103116-97-8
• 103116-99-0
• 103-11-7
• 1031-17-0
• 103117-00-6
• 103117-08-4
• 103117-19-7

Recommended suppliers