Calcium chloride anhydrous

1.
1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product identifiers
Product name
Product Number
Brand
Index-No.
CAS-No.
:
:
:
:
:
Calcium chloride
06991
Fluka
017-013-00-2
10043-52-4
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Eye irritation (Category 2)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H319
Precautionary statement(s)
P305 + P351 + P338
Supplemental Hazard
Warning
Causes serious eye irritation.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R36
S-phrase(s)
S22
S24
Irritating to eyes.
Do not breathe dust.
Avoid contact with skin.
2.3
3.
3.1
Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula
Molecular Weight
Component
Calcium chloride
:
:
CaCl2
110,98 g/mol
Concentration
CAS-No.
EC-No.
Index-No.
10043-52-4
233-140-8
017-013-00-2
-
4.
4.1
4.2
4.3
5.
5.1
5.2
5.3
5.4
FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available
FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Special hazards arising from the substance or mixture
Hydrogen chloride gas, Calcium oxide
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
The product itself does not burn.
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8.
8.1
8.2
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Moisture sensitive.
Specific end uses
no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Immersion protection
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril? (Anonymous Z677272, Size M)
Splash protection
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril? (Anonymous Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 873000, e-mail sales@kcl.de,
test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an Industrial Hygienist familiar with the specific situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
9.
9.1
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
e)
f)
g)
h)
Appearance
Odour
Odour Threshold
pH
Melting point/freezing
point
Initial boiling point and
boiling range
Flash point
Evaporation rate
Form: crystalline
Colour: white
no data available
no data available
no data available
Melting point/range: 772 °C
1.670 °C
no data available
no data available
i)
Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
0,01 hPa at 20 °C
no data available
m) Relative density
2,150 g/cm3
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
no data available
no data available
no data available
no data available
no data available
no data available
no data available
9.2
Other safety information
no data available
10.
10.1
10.2
10.3
10.4
10.5
10.6
11.
11.1
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
Exposure to moisture may affect product quality.
Incompatible materials
Strong acids, Borane/boron oxides, Zinc, Calcium oxide, Methyl vinyl ether, Calcium chloride is attacked by
bromine trifluoride
Hazardous decomposition products
Other decomposition products - no data available
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
LD50 Oral - rat - 1.000 mg/kg
Skin corrosion/irritation
Skin - rabbit - No skin irritation
Serious eye damage/eye irritation
Eyes - rat - Severe eye irritation
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
Genotoxicity in vivo - rat - Intraperitoneal
Unscheduled DNA synthesis
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. May cause respiratory tract irritation.
Harmful if swallowed.
May be harmful if absorbed through skin. May cause skin irritation.
Causes eye burns.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: EV9800000
12.
12.1
ECOLOGICAL INFORMATION
Toxicity
Toxicity to fish
Toxicity to daphnia and
other aquatic
invertebrates
LC50 - Lepomis macrochirus - 10.650 mg/l - 96 h
EC50 - Daphnia magna (Water flea) - 52 mg/l - 48 h
12.2
12.3
12.4
12.5
12.6
13.
13.1
14.
14.1
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
Harmful to aquatic life.
no data available
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN number
14.2
14.3
14.4
14.5
14.6
15.
ADR/RID: -
UN proper shipping name
ADR/RID:
Not dangerous goods
IMDG:
Not dangerous goods
IATA:
Not dangerous goods
Transport hazard class(es)
ADR/RID: -
Packaging group
ADR/RID: -
Environmental hazards
ADR/RID: no
Special precautions for user
no data available
REGULATORY INFORMATION
IMDG: -
IMDG: -
IMDG: -
IMDG Marine pollutant: no
IATA: -
IATA: -
IATA: -
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
16.
OTHER INFORMATION
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.

;

Recommended suppliers

Wuhan Biet Co., Ltd

China (Mainland) Assessed Supplier

Calcium chloride 74% flakes

  • Assay:74,
  • Appearance:White flakes
  • Package:25kg/bag
  • Storage:Store in a cool, dry, ventilated environment
  • Transportation:away from fire
  • Application:snow-melting agent
Contact Supplier

Hainan HYS chemical Co., Ltd

China (Mainland) Assessed Supplier

Calcium chloride Anhydrous

  • Assay:94%,
  • Appearance:White granules/powder
  • Package:25kg/bag
  • Storage:Store in dry, cool, sealed conditions
  • Transportation:Keep dry, avoid damage By sea--FOB/CIF/CFR
  • Application:Industrial desiccant/Road deicing agent/Concrete accelerator/Food Grade
Contact Supplier

Chemwill Asia Co., Ltd.

China (Mainland) Assessed Supplier

Calcium chloride Factory

  • Assay:BP/USP/FCC,
  • Appearance:As per COA
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place
  • Transportation:BY SEA or BY AIR
  • Application:Application: It is an important raw material and intermediate for chemical industry.
Contact Supplier

Josun International Limited

China (Mainland) Assessed Supplier

Anhydrous Calcium chloride 94%min for industry use / refrigerant antifreeze

  • Assay:94%min
  • Appearance:white
  • Package:25kg/bag, 1000kg/bag
  • Storage:In airtight container, protect from light.
  • Transportation:by sea , truck
  • Application:Refrigerant, Antifreeze, Fire extinguishing agent, Snow melting agent, Construction industry, Dustproof agent.
Contact Supplier

Triumph International Development Limilted

China (Mainland) Assessed Supplier

Calcium Chloride Dihydrate

  • Assay:1,
  • Appearance:White Flakes or Powder
  • Package:Generally Calcium Chloride dehydrate 74% ,77% is supplied in the following packaging: -25 kg moisture-proof PP bags, -25 kg or 50 lb PE bags, -1000kg moisture-proof big bags with inner PE bags.
  • Storage:Protect packages from damage and keep them well closed. Store in a cool, well-ventilated, dry and shaded area. Avoid inhalation, ingestion and contact with eyes and skin.
  • Transportation:By Air
  • Application:Calcium Chloride Dihydrate 74% is is used as Ice & Snow Melter, Dust Control on roadways and mines, Road-base Stabilizattion, Dehydrating agent in petrochemicals, Drying Agent, Antifreeze for ready-mi
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View