Boron oxide

1.
1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product identifiers
Product name
Product Number
Brand
CAS-No.
:
:
:
:
Boric anhydride
221740
Anonymous-Anonymous
1303-86-2
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Reproductive toxicity (Category 1B)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
May impair fertility. May cause harm to the unborn child.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H360FD
Precautionary statement(s)
P201
P308 + P313
Supplemental Hazard
Statements
Restricted to professional users.
Danger
May damage fertility. May damage the unborn child.
Obtain special instructions before use.
IF exposed or concerned: Get medical advice/ attention.
none
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R60
R61
S-phrase(s)
S53
S45
May impair fertility.
May cause harm to the unborn child.
Avoid exposure - obtain special instructions before use.
In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
Restricted to professional users.
2.3
3.
3.1
Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms
Formula
Molecular Weight
Component
:
:
:
Boron trioxide
B2O3
69,62 g/mol
Concentration
Diboron trioxide Included in the Candidate List of Substances of Very High Concern (SVHC) according
to Regulation (EC) No. 1907/2006 (REACH)
CAS-No.
EC-No.
1303-86-2
215-125-8
-
4.
4.1
4.2
4.3
5.
5.1
FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
Cough, Difficulty in breathing, To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available
FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2
5.3
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8.
8.1
8.2
Special hazards arising from the substance or mixture
Borane/boron oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid formation of dust and aerosols.Avoid exposure - obtain special instructions before use.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Immersion protection
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: > 480 min
Material tested:Dermatril? (Anonymous Z677272, Size M)
Splash protection
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: > 30 min
Material tested:Dermatril? (Anonymous Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 873000, e-mail sales@kcl.de,
test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an Industrial Hygienist familiar with the specific situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
9.
9.1
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
e)
f)
g)
h)
Appearance
Odour
Odour Threshold
pH
Melting point/freezing
point
Initial boiling point and
boiling range
Flash point
Evaporation rate
Form: solid
no data available
no data available
no data available
Melting point/range: 450 °C - lit.
no data available
not applicable
no data available
i)
Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
no data available
no data available
m) Relative density
2,46 g/mL at 25 °C
n)
o)
p)
q)
r)
s)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
no data available
no data available
no data available
no data available
no data available
no data available
t)
Oxidizing properties
no data available
9.2
10.
10.1
10.2
10.3
10.4
10.5
10.6
11.
11.1
Other safety information
no data available
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
Exposure to moisture may affect product quality.
Incompatible materials
acids, Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
LD50 Oral - mouse - 3.163 mg/kg
Skin corrosion/irritation
Serious eye damage/eye irritation
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
Presumed human reproductive toxicant
Presumed human reproductive toxicant
Specific target organ toxicity - single exposure
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. May cause respiratory tract irritation.
May be harmful if swallowed.
May be harmful if absorbed through skin. May cause skin irritation.
May cause eye irritation.
Signs and Symptoms of Exposure
Cough, Difficulty in breathing, To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
Additional Information
RTECS: Not available
12.
12.1
ECOLOGICAL INFORMATION
Toxicity
Toxicity to fish
Toxicity to daphnia and
other aquatic
invertebrates
LC50 - Carassius auratus (goldfish) - 570 mg/l - 72 h
EC50 - Daphnia magna (Water flea) - 370 - 490 mg/l - 48 h
12.2
12.3
12.4
12.5
12.6
13.
13.1
14.
14.1
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN number
14.2
14.3
14.4
14.5
14.6
15.
ADR/RID: -
UN proper shipping name
ADR/RID:
Not dangerous goods
IMDG:
Not dangerous goods
IATA:
Not dangerous goods
Transport hazard class(es)
ADR/RID: -
Packaging group
ADR/RID: -
Environmental hazards
ADR/RID: no
Special precautions for user
no data available
REGULATORY INFORMATION
IMDG: -
IMDG: -
IMDG: -
IMDG Marine pollutant: no
IATA: -
IATA: -
IATA: -
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
16.
OTHER INFORMATION
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.

;

Recommended suppliers

Zibo Hangyu Biotechnology Development Co., Ltd

China (Mainland) Assessed Supplier

High quality Boron Oxide

  • Assay:High quality,High quality1,
  • Appearance:powder or liquid
  • Package:according to customer requirements
  • Storage:store in dry dark and ventilated place
  • Transportation:By Sea/Air/Courier
  • Application:It is an important raw material.
Contact Supplier

Suzhou Sinosun Imp.&Exp. Corporation

China (Mainland) Assessed Supplier

Boron oxide

  • Assay:≥98.5%
  • Appearance:white granule
  • Package:25kgs paper bags
  • Storage:COOL DRY PLACE
  • Transportation:by sea as per common goods.
  • Application:Boron oxide was used as the intermediate glass layer at a bonding temperature of 450°C. In preparation of fluxes; component of enamels and glass; catalyst in organic reaction. In metallurgy; in anal
Contact Supplier

Dayang Chem (Hangzhou) Co.,Ltd.

China (Mainland) Assessed Supplier

Boron oxide suppliers in China

  • Assay:Industrial Grade,
  • Appearance:white powder
  • Package:according to the clients requirement
  • Storage:Store in dry, dark and ventilated place.
  • Transportation:by sea or by air
  • Application:fluxing agent
Contact Supplier

Simagchem Corporation

China (Mainland) Assessed Supplier

High quality Boron Oxide with high purity

  • Assay:99%
  • Appearance:white-off solid or colorless liquid ( referto COA)
  • Package:25kgs/fiber drum or 200kgs/UN drum
  • Storage:in a cool and dry place
  • Transportation:by sea or by air
  • Application:organic intermediates
Contact Supplier

Hebei yanxi chemical co.,LTD.

China (Mainland) Assessed Supplier

Boron oxide suppliers in China CAS NO.1303-86-2

  • Assay:10KG,10g,
  • Appearance:crystal, powder
  • Package:as your request
  • Storage:stay in dry, cool and well-sealed
  • Transportation:EMS,HK EMS,FEDEX,DHL,TNT
  • Application:Pharmaceutical intermediates
Contact Supplier

About|Contact|Cas|Product Name|Molecular|Country|Encyclopedia

Message|New Cas|MSDS|Service|Advertisement|CAS DataBase|Article Data|Manufacturers | Chemical Catalog

©2008 LookChem.com,License: ICP

NO.:Zhejiang16009103

complaints:service@lookchem.com Desktop View