CasNo.63231-66-3,Chlorinated polyethylene,POLYETHYLENE, CHLORINATED(63231-66-3) Suppliers

5 Metric Ton	Negotiable

Min.Order :5 Metric Ton
Purity: chlorine content:35+/-2%
Payment Terms : L/C,T/T

Keywords

CPE,Chlorinated polyethylene CPE Chlorinated polyethylene supplier

Quick Details

Appearance:White power
Application:It can be used as impact modifier for PVC hard product, which is largely used in the production of plastics doors and windows and the production of tubing. It can also be used as special rubber to r
PackAge:25kg/bag,
ProductionCapacity:50000|Metric Ton|Year
Storage:
Transportation:by sea

Superiority:

Weifang Derun Chemical co.,Ltd covers an area of 62,000 square meters.

The world largest production equipment of SIPM(DMSIP) and 5 SSIPA, the production technology is also the most

advanced domestic.

The production capacity of Dimethyl-5-Sulfoisophthalate Sodium Salt(SIPM,DMSIP) is 8000tons/year.

The production capacity of 5-Sulfoisophthalic Acid Monosodium Salt(5-SSIPA) is 3000tons/year.

Details:

CPE is a low-energy, no pollution product. The use of this product plays an important role in the transform of traditional

industries and the development of national economy.

According to the difference of CPE performances, they are divided into ten brands. Users can choose according to their demands. The following products are supplied in the form of granular powder

1,CPE135A,It is the general brand of plastic hardware products modification. It has good plasticization performance and no agglomeration. It is widely used in section bar, tubing and panel. It can better improve the shock resistance of products.

2,CPE135AH, Plastic modification new brand. It has high plasticizing rate, which is suitable for high-speed extrusion.

It can be total or part replaces ACR, MBS modifier.

3,CPE135C,This product has medium degree of crystalline and good melting fluidity. It is widely used in ABS, PE, PP and other plastic injection molding products to improve the flame retardant performance and increase compatibility.

4,CPE130A,Magnetic rubber special brand. It has the characteristics like: good fallibility, high tensile strength, easy processing and low temperature resistance.

5,CM135B,It is general rubber brand number. It has the characteristics like: low crystal, moderate Mooney viscosity, good mechanical property, which is widely used in wire, cable, sebific duct and other rubber products.

6,CM435,Mooney viscosity is between 70 and 80 It has the advantages like: good mechanical property and easy processing, it is widely used in the production of wire, cable and sebific duct.

7,CM335,Mooney viscosity is between 60and 70. It has the advantages like: good mechanical property and easy processing, It can total and part replaces CR, CSM, NBR and other rubbers, which is widely used in rubber and other areas.

8,Kpren CM235,Low Mooney viscosity, good process flow ability, low hardness, which is widely used in many rubber areas.

9,130B,It is widely used in insulation, pliable and tough, inflaming retarding, oil resistance and has certain mechanical strength requirements products.

10,140B,Moderate Mooney viscosity. It is easy processing, oil resistance and inflaming retarding.

.