Ferric sulfate

Details:

Poly Ferric Sulfate Water treatment chemical Good flocculation and water purification effect High quality Poly Ferric Sulfate  1) Ferric Sulfate, Iron Sulfate, Fe2(SO4)3. 2) Fe3+ content More than 21.5% (m/m) 3) Fe2+ content 0.10% max 4) High qualityName Ferric Sulfate , Iron Sulfate , Fe2(SO4)3 xH2O. Specification No.Itemresult1Fe3+ %      w/w21.582Reduced matter(as Fe2+)  %  w/w0.013PH(1%Aq. solution)2.334Insoluble material % w/w0.13 ApplicationAs flocculant in purification of municipal water, industrial water, waste water, domestic sewage and sludge dewatering.Features (compared with other inorganic flocculant)    1. High-efficiency inorganic polymer flocculant.    2. Good coagulating property. Flocs formed are large and easily settable.    3. SPFS is non-toxic. It can capture aluminum, chloride and heavy metal, and will not cause Fe contamination.     4. Good effect in decolorizing, capturing oil, bacteria, algae, reducing COD, BOD and heavy metal.    5. Low corrosion. Working pH range 4-11, with best performance at pH 6-9. pH and basicity of water almost do not change after treatment with SPFS.     6. Suitable for purification of low-turbidity, low-algae, low-temperature, low-contaminated raw water. Particularly effective for high-turbidity raw water.    7. Low dosage required, save 20%-50% of cost. Features(1) has the same features as inorganic flocculants such as polyferric sulfate, polyaluminum chloride, etc. (2) low use level and cheap cost; (3) has stronger effect to remove COD at the slightly acid condition;(4) specially effective to treat the wastewater from oil field and oil extractioPoly Ferric Sulfate Water treatment chemical Good flocculation and water purification effect High quality Poly Ferric Sulfate  1) Ferric PolPoly Ferric SulfateWater treatment chemicalGood flocculation and water purification effectHigh quality Poly Ferric Sulfate  1) Ferric Sulfate, Iron Sulfate, Fe2(SO4)3. 2) Fe3+ content More than 21.5% (m/m) 3) Fe2+ content 0.10% max 4) High qualityName Ferric Sulfate , Iron Sulfate , Fe2(SO4)3 xH2O. Specification No.Itemresult1Fe3+ %      w/w21.582Reduced matter(as Fe2+)  %  w/w0.013PH(1%Aq. solution)2.334Insoluble material % w/w0.13 ApplicationAs flocculant in purification of municipal water, industrial water, waste water, domestic sewage and sludge dewatering.Features (compared with other inorganic flocculant)    1. High-efficiency inorganic polymer flocculant.    2. Good coagulating property. Flocs formed are large and easily settable.    3. SPFS is non-toxic. It can capture aluminum, chloride and heavy metal, and will not cause Fe contamination.     4. Good effect in decolorizing, capturing oil, bacteria, algae, reducing COD, BOD and heavy metal.    5. Low corrosion. Working pH range 4-11, with best performance at pH 6-9. pH and basicity of water almost do not change after treatment with SPFS.     6. Suitable for purification of low-turbidity, low-algae, low-temperature, low-contaminated raw water. Particularly effective for high-turbidity raw water.    7. Low dosage required, save 20%-50% of cost. Features(1) has the same features as inorganic flocculants such as polyferric sulfate, polyaluminum chloride, etc. (2) low use level and cheap cost; (3) has stronger effect to remove COD at the slightly acid condition;(4) specially effective to treat the wastewater from oil field and oil extractio