Polyester modified silicon resin IOTA-1062G

Polyester modified silicon resin IOTA-1062G

Characteristics and application:

This product has a relatively excellent resistance to high and low temperature, hydrophobic moisture resistance and good electrical insulation properties, arc resistance corona performance. Its weather resistance and chemical stability, corrosion resistance is also very good. This product has high hardness after fully cured (≥5H), high gloss, good fullness, high temperature resistance, anti-yellowing property.

IOTA-1062G widely used in high temperature resistance paints; high temperature nonsticking paints for kitchen appliance, basic resin for special paints.

Data:

Appearance: Colorless transparent liquid

Solid content: 57±1%

Viscosity: ≥ 100 seconds (No 4 cup, 25℃)

Acid value: ≤4 mg KOH/g

Varnish film hardness: ≥5H

Curing method:

This product use high temperature oven curing method. The best we suggest is 200℃for 30minutes；250℃ for 15 minutes; 280℃.

It may be used with amino resin, amino resin increment control in 1062G 10 to 15%, but after adding the amino resin will be slightly yellowing at high temperatures.

Notes:

a. The diluting solvent used in this product should not contains water, pyridine sulfur-containing compounds and impurities, otherwise it will affect the resin film adhesion, dry and other properties.

b. There will be a lot of xylene and other flammable, toxic solvents evaporate during the production process, we should pay special attention to strengthening the field of ventilation, attention to fire safety, strict cut off the source of fire. The operator should pay attention to labor protection.

c. The processing equipment, utensils must be clean during the production process. To prevent dust、foreign matter and water.

d. The products such as acid、alkali、salt of organic acid amine compounds has Accelerate the solidification effectiveness for this product, and will influence the heat resistance and electrical properties. So, this product should be isolated with those products when storing.

Storage: This product should be stored in ventilated, cool, dry place to prevent direct sunlight exposure; to prevent serious pollution of acid, lye, and should be cut off from sources of ignition away from heat, the product storage period is six months.

Packing: 25kg white iron drum, 200kg white iron drum