588-63-6-1-bromo-3-Phenoxy propane

Boiling point: 222 °C(lit. )
Flash point: 228 °F
Refractive index: n20/D 1.546(lit. )
Stability: Stable undermaster instruments and expressions.
Storage conditions: Store in a cool, try place. Keep connection when not in use.
First Aid Measures Editor
Inhale: If inhaled, move the patient to fresh air.
Skin contact: Remove contaminated clothing and rinse thoroughly with soapy water and water. If you feel uncomfortable, seek medical attention.
Eye contact: separate eyelids and rinse with flowing water or saline. Immediate medical attention.
Ingredient: gargle, no vomiting. Immediate medical attention.
Advice for the protection of rescuers:
Move the patient to a safe place. Consult a doctor. Show this chemical safety technical specification to the doctor at the scene.
Fire Protection Measures Editor
Fire extinguishing agent:
Fire with water mist, dry powder, foam or carbon dioxide extinguishing agent.
Avoid the use of straight water to extinguish fires. Straight water may cause spatter of flammable liquids and spread the fire.
Attention to Fire Extinguishing and Protection Measures:
Firefighters must wear a portable respirator and a full-body fire suit to extinguish the fire in the upper wind direction.
Move the container from the fire to the open as far as possible.
Containers in fire must be evacuated immediately if they have changed color or made a sound from a safety discharge device.
Isolate the scene of the accident and forbid entry by unrelated personnel. Containment and treatment of Fire-fighting water to prevent environmental pollution.
Leakage Emergency Handling Editor
Operational personnel protection measures, protective equipment and emergency disposal procedures:
It is recommended that emergency treatment personnel wear gas type respirator, wear anti-static clothing, Daixiangxiao oil resistant gloves.
No contact or crossing of leaks.
All equipment used in the operation should be grounded.
Cut the leak as far as possible.
Eliminate all points of fire.
A warning area is designated according to the affected area of liquid flow, steam or dust diffusion, and unrelated personnel are evacuated from the crosswind, upper wind direction to the security zone.
Environmental protection measures:
Containment of leaks to avoid environmental pollution. Prevent leaks from entering sewers, surface water and groundwater.
Storage, removal methods and disposal materials used for leaking chemicals:
Small leakage: as far as possible, the leaking liquid is collected in a closed container. Absorb with sand, activated carbon or other inert materials and transfer to a safe place. Don't go down the drain.
Large number of leaks: build dikes or dig pits. Seal the drain. Cover with foam to suppress evaporation. Transfer to tank truck or special collector with explosion proof pump for recovery or transportation to waste disposal site.