CasNo.308080-99-1,3A Molecular Sieve,(308080-99-1) Suppliers

500 Kilogram	FOB Price:USD 3.9900 -4.2500

Min.Order :500 Kilogram
Purity: 98%
Payment Terms : L/C,T/T

Keywords

desiccant CAS NO.308080-99-1 adsorbent

Quick Details

Appearance:White spherical
Application:3A molecular sieve in the water adsorption process, excluding other hydrocarbon molecules, widely used in petroleum pyrolysis gas, such as ethylene, propylene, butadiene, acetylene and natural gas dee
PackAge:25kg/woven bag, 750kg/palle by the customer requirement
ProductionCapacity:100|Metric Ton|Day
Storage:Place at room temperature
Transportation:FOB/CFR/CIF BY SEA

Superiority:

3A Molecular Sieve

3A molecular sieve is an alkali metal aluminosilicate with a pore diameter of 3A. It is mainly used to adsorb water and does not adsorb any molecule with a diameter larger than 3A. According to the industrial application characteristics, the molecular sieve has the advantages of fast adsorption, High strength and other capabilities, improve the utilization efficiency of molecular sieve and extend the service life of molecular sieve, which is the desiccant necessary for the deep drying, refining and polymerization of gas and liquid in petroleum and chemical industry.

3A molecular sieve in the water adsorption process, excluding other hydrocarbon molecules, widely used in petroleum pyrolysis gas, such as ethylene, propylene, butadiene, acetylene and natural gas deep drying. Can also be used for polar liquids (such as ethanol), liquefied petroleum gas, solvent drying. The 3A molecular sieve produced by our company has succeeded in replacing the imported products in petrochemical enterprises. For example, it can be used as desiccant for pyrolysis gas. After adsorbed by 3A molecular sieve, the gas water content can be reduced below 1ppm (dew point less than -70 ℃).

3A molecular sieve hot dry gas (usually nitrogen) for regeneration, reuse. The degree of regeneration depends on the temperature, flow rate and humidity of the hot drying gas (regeneration optimum temperature 200-350 ° C).

3A / 4A / 5A Molecular Sieve Specification:

Details:

3A Molecular Sieve

3A molecular sieve is an alkali metal aluminosilicate with a pore diameter of 3A. It is mainly used to adsorb water and does not adsorb any molecule with a diameter larger than 3A. According to the industrial application characteristics, the molecular sieve has the advantages of fast adsorption, High strength and other capabilities, improve the utilization efficiency of molecular sieve and extend the service life of molecular sieve, which is the desiccant necessary for the deep drying, refining and polymerization of gas and liquid in petroleum and chemical industry.

3A molecular sieve in the water adsorption process, excluding other hydrocarbon molecules, widely used in petroleum pyrolysis gas, such as ethylene, propylene, butadiene, acetylene and natural gas deep drying. Can also be used for polar liquids (such as ethanol), liquefied petroleum gas, solvent drying. The 3A molecular sieve produced by our company has succeeded in replacing the imported products in petrochemical enterprises. For example, it can be used as desiccant for pyrolysis gas. After adsorbed by 3A molecular sieve, the gas water content can be reduced below 1ppm (dew point less than -70 ℃).

3A molecular sieve hot dry gas (usually nitrogen) for regeneration, reuse. The degree of regeneration depends on the temperature, flow rate and humidity of the hot drying gas (regeneration optimum temperature 200-350 ° C).

3A / 4A / 5A Molecular Sieve Specification:

Property	Unit	Bead		Note
Diameter	mm	1.6-2.5	3-5
Static H₂O Adsorption	%wt	≥26 .00	≥26.00	RH50%, 25 ℃
Static CO₂ Adsorption	%wt	≥ 18.00	≥ 18.00	250mmHg, 25 ℃
Bulk Density	g/ml	≥ 0.62	≥ 0.62	Tapped
Loss on ignition	%wt	≤1.50	≤1.50	575 ℃ ,1hr
Loss on Wear	%wt	≤0.10	≤0.10	~
Crush strength	N	≥30	≥80	A vg. 25 beads
Particle ratio	%	≥97	≥99	~