Superiority:

SAFETY DATA SHEETS

According to the UN GHS revision 10

Version: 1.0

Creation Date: July 15, 2019

Revision Date: July 15, 2019

SECTION 1: Identification

1.1GHS Product identifier

Product name	Cetrimonium chloride

1.2Other means of identification

Product number	-
Other names	Hexadecyltrimethylammonium chloride;Cetyltrimethylammonium Chloride;Hexadecyltrimethylammonium Chloride

1.3Recommended use of the chemical and restrictions on use

Identified uses	Industrial and scientific research use.
Uses advised against	no data available

SECTION 2: Hazard identification

2.1Classification of the substance or mixture

Acute toxicity - Category 4, Oral

Acute toxicity - Category 3, Dermal

Skin corrosion, Sub-category 1C

Serious eye damage, Category 1

Hazardous to the aquatic environment, short-term (Acute) - Category Acute 1

Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 1

2.2GHS label elements, including precautionary statements

Pictogram(s)
Signal word	Danger
Hazard statement(s)	H302 Harmful if swallowed H311 Toxic in contact with skin H314 Causes severe skin burns and eye damage H410 Very toxic to aquatic life with long lasting effects
Precautionary statement(s)
Prevention	P264 Wash ... thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/... P260 Do not breathe dust/fume/gas/mist/vapours/spray. P273 Avoid release to the environment.
Response	P301+P317 IF SWALLOWED: Get medical help. P330 Rinse mouth. P302+P352 IF ON SKIN: Wash with plenty of water/... P316 Get emergency medical help immediately. P321 Specific treatment (see ... on this label). P361+P364 Take off immediately all contaminated clothing and wash it before reuse. P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P363 Wash contaminated clothing before reuse. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P305+P354+P338 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P317 Get medical help. P391 Collect spillage.
Storage	P405 Store locked up.
Disposal	P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.

2.3Other hazards which do not result in classification

no data available

SECTION 3: Composition/information on ingredients

3.1Substances

Chemical name	Common names and synonyms	CAS number	EC number	Concentration
Cetrimonium chloride	Cetrimonium chloride	112-02-7	203-928-6	100%

SECTION 4: First-aid measures

4.1Description of necessary first-aid measures

If inhaled

Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.

Following skin contact

Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.

Following eye contact

Rinse with pure water for at least 15 minutes. Consult a doctor.

Following ingestion

Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.

4.2Most important symptoms/effects, acute and delayed

Ingestion may produce toxic effects. Contact with eyes or skin may cause severe damage. (USCG, 1999)

4.3Indication of immediate medical attention and special treatment needed, if necessary

no data available

SECTION 5: Fire-fighting measures

5.1Suitable extinguishing media

Dry chem, /alcohol/ foam, or carbon dioxide. water may be ineffective on fire. cool exposed containers with water. cetyltrimethylammonium chloride soln

5.2Specific hazards arising from the chemical

Special Hazards of Combustion Products: Irritating fumes of hydrogen chloride may form in fires. Behavior in Fire: Solvent vapors are heavier than air and may travel to a source of ignition and flash back. (USCG, 1999)

5.3Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

SECTION 6: Accidental release measures

6.1Personal precautions, protective equipment and emergency procedures

Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.

6.2Environmental precautions

Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.

6.3Methods and materials for containment and cleaning up

Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.

SECTION 7: Handling and storage

7.1Precautions for safe handling

Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.

7.2Conditions for safe storage, including any incompatibilities

Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.

SECTION 8: Exposure controls/personal protection

8.1Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2Appropriate engineering controls

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.

8.3Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).

Skin protection

Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.

Thermal hazards

no data available

SECTION 9: Physical and chemical properties and safety characteristics

Physical state	Solid. Powder.
Colour	White.
Odour	no data available
Melting point/freezing point	99 °C. Remarks:Melting temperature range: 90 to 99°C.
Boiling point or initial boiling point and boiling range	248 °C. Remarks:Boiling temperature range was 235 to 248°C.
Flammability	no data available
Lower and upper explosion limit/flammability limit	IN AIR: 2%-12% /ISOPROPYL ALCOHOL SOLN OF CETYLTRIMETHYLAMMONIUM CHLORIDE/
Flash point	69° F (USCG, 1999)
Auto-ignition temperature	750° F (USCG, 1999)
Decomposition temperature	no data available
pH	no data available
Kinematic viscosity	no data available
Solubility	Water solubility: 440 mg/l at 30 deg C
Partition coefficient n-octanol/water	Pow = 1 208.3. Temperature:25 °C.;log Pow = 3.08. Temperature:25 °C.
Vapour pressure	< 0.002 Pa. Temperature:20 °C. Remarks:(i.e., equivalent to.;< 0.006 Pa. Temperature:25 °C. Remarks:(i.e., equivalent to.
Density and/or relative density	0.96 g/cm³. Temperature:20 °C.;960. Temperature:20 °C.
Relative vapour density	no data available
Particle characteristics	no data available

SECTION 10: Stability and reactivity

10.1Reactivity

No rapid reaction with air. No rapid reaction with water.

10.2Chemical stability

no data available

10.3Possibility of hazardous reactions

HEXADECYLTRIMETHYLAMMONIUM CHLORIDE is a quaternary ammonium compound. Therefore it has a permanently charged nitrogen atom with four alkyl or aryl groups on it. Compounds in this group are generally soluble in water and are near pH 7 (neutral). They do not undergo the acid-base reactions typical of primary, secondary, or tertiary ammonium ions. Quaternary ammonium salts often serve as catalysts in reactions. They are incompatible with many strong oxidizers and reducing agents, such as metal hydrides, alkali/active metals, and organometallics.

10.4Conditions to avoid

no data available

10.5Incompatible materials

no data available

10.6Hazardous decomposition products

When heated to decomposition it emits very toxic fumes of /hydrogen chloride and nitrogen oxides/.

SECTION 11: Toxicological information

Acute toxicity

• Oral: LD50 - rat (male/female) - ca. 699 mg/kg bw.
• Inhalation: no data available
• Dermal: LD50 - rabbit (male) - 1 300 mg/kg bw.

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

SECTION 12: Ecological information

12.1Toxicity

• Toxicity to fish: LC50 - Danio rerio (previous name: Brachydanio rerio) - 0.59 mg/L - 96 h. Remarks:(no information on % ai).
• Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna - 280 µg/L - 48 h.
• Toxicity to algae: EC50 - Pseudokirchneriella subcapitata (previous names: Raphidocelis subcapitata, Selenastrum capricornutum) - 0.11 mg/L - 96 h.
• Toxicity to microorganisms: EC10 - Pseudomonas putida - 0.4 mg/L - 16 h. Remarks:(based on ca. 30% a.i. in test substance).

12.2Persistence and degradability

The cationic surfactants biodegradation in sewage and river water was studied, measuring the reduction of the active substance by a colorimetric method using sodium alizarine sulfonate.

12.3Bioaccumulative potential

An estimated BCF of 71 was calculated for trimethylhexadecylammonium chloride(SRC), using an estimated log Kow of 3.23(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is moderate.

12.4Mobility in soil

Using a structure estimation method based on molecular connectivity indices(1), the Koc for trimethylhexadecylammonium chloride can be estimated to be 2.2X10+5(SRC). According to a classification scheme(2), this estimated Koc value suggests that trimethylhexadecylammonium chloride is expected to immobile in soil.

12.5Other adverse effects

no data available

SECTION 13: Disposal considerations

13.1Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

SECTION 14: Transport information

14.1UN Number

ADR/RID: no data available

IMDG: no data available

IATA: no data available

14.2UN Proper Shipping Name

ADR/RID: no data available

IMDG: no data available

IATA: no data available

14.3Transport hazard class(es)

ADR/RID: 6.1 (For reference only, please check.)

IMDG: 6.1 (For reference only, please check.)

IATA: 6.1 (For reference only, please check.)

14.4Packing group, if applicable

ADR/RID: III (For reference only, please check.)

IMDG: III (For reference only, please check.)

IATA: III (For reference only, please check.)

14.5Environmental hazards

ADR/RID: Yes

IMDG: Yes

IATA: Yes

14.6Special precautions for user

no data available

14.7Transport in bulk according to IMO instruments

no data available

SECTION 15: Regulatory information

15.1Safety, health and environmental regulations specific for the product in question

Chemical name	Common names and synonyms	CAS number	EC number
Cetrimonium chloride	Cetrimonium chloride	112-02-7	203-928-6
European Inventory of Existing Commercial Chemical Substances (EINECS)			Listed.
EC Inventory			Listed.
United States Toxic Substances Control Act (TSCA) Inventory			Listed.
China Catalog of Hazardous chemicals 2015			Not Listed.
New Zealand Inventory of Chemicals (NZIoC)			Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS)			Listed.
Vietnam National Chemical Inventory			Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC)			Listed.
Korea Existing Chemicals List (KECL)			Listed.

SECTION 16: Other information

Information on revision

Creation Date	July 15, 2019
Revision Date	July 15, 2019

Abbreviations and acronyms

• CAS: Chemical Abstracts Service
• ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
• RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
• IMDG: International Maritime Dangerous Goods
• IATA: International Air Transportation Association
• TWA: Time Weighted Average
• STEL: Short term exposure limit
• LC50: Lethal Concentration 50%
• LD50: Lethal Dose 50%
• EC50: Effective Concentration 50%

 

Package&Shipping